lkml.org 
[lkml]   [2014]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 1/5] PM / Runtime: Add getter for querying the IRQ safe option
From
Date
On sob, 2014-11-01 at 02:29 +0200, Laurent Pinchart wrote:
> Hi Krzysztof,
>
> On Friday 31 October 2014 15:40:16 Krzysztof Kozlowski wrote:
> > On pią, 2014-10-31 at 15:22 +0100, Pavel Machek wrote:
> > > On Fri 2014-10-31 10:14:55, Krzysztof Kozlowski wrote:
> > >> On pon, 2014-10-20 at 11:04 +0200, Krzysztof Kozlowski wrote:
> > >>> Add a simple getter pm_runtime_is_irq_safe() for querying whether
> > >>> runtime PM IRQ safe was set or not.
> > >>>
> > >>> Various bus drivers implementing runtime PM may use choose to suspend
> > >>> differently based on IRQ safeness status of child driver (e.g. do not
> > >>> unprepare the clock if IRQ safe is not set).
> > >>>
> > >>> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > >>> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
> > >>
> > >> Rafael, Len, Pavel,
> > >>
> > >> Is proposed API ok? Do you have any comments?
> > >>
> > >> I'll upload whole patchset to Russell's patch tracking system. However
> > >> an ack from PM maintainer is probably needed.
> > >
> > > I don't like the API. Having callbacks work in different context (irq
> > > / noirq) based on what another function reports is ugly.
> > >
> > > What is the penalty if we always decide callbacks are not IRQ safe?
> >
> > Then pm_runtime_get_sync() could not be called in atomic context. The
> > pl330 runtime PM would have to be completely reworked because one
> > pm_runtime_get_sync() is called in device_issue_pending which cannot
> > sleep (at least in non preemptible kernels). Probably this can be solved
> > some way...
>
> Many other drivers suffer from the same problem. While I won't reject your
> proposed fix, I would prefer a more generic approach.
>
> One option that has been discussed previously was to use a work queue to delay
> starting the DMA transfer to an interruptible context where
> pm_runtime_get_sync() could be called. However, as Russell pointed out [1],
> even that won't work in all cases as the DMA slave might need the transfer to
> be started before enabling part of its hardware (OMAP audio seem to be such a
> case).
>
> I've heard a rumor of a possible DMA engine rework to forbid calling the
> descriptor preparation API from atomic context. This could be used as a base
> to implement runtime PM, as DMA slave drivers should not prepare descriptors
> if they don't need to use them. However that's a long term plan, and we need a
> solution sooner than that.
>
> I've been toying with the idea of adding explicit open/close (or whatever we
> would call them) operations to the DMA engine API. Those would be used by DMA
> slave drivers to signal that they will start/stop using the DMA engine.
>
> If (1) we must start the DMA synchronously with a DMA slave call, (2) need to
> sleep to handle PM, and (3) don't want to keep the DMA engine powered for as
> long as one channel is requested, then we need to turn at least preparation as
> not callable in atomic context, or introduce a new operation.
>
> [1] http://www.spinics.net/lists/dmaengine/msg01548.html

That makes sense. However I am not familiar with DMA core code as much
as I think it would be needed to make such generic changes :). I'll
stick to one driver for now.

Thanks for comments!
Krzysztof



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-11-03 11:01    [W:0.643 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site