lkml.org 
[lkml]   [2014]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/3] dt-bindings: Add Reset Controller for MediaTek SoC
Date
Add device tree bindings.

Signed-off-by: Flora Fu <flora.fu@mediatek.com>
---
.../devicetree/bindings/reset/mediatek,reset.txt | 45 ++++++++++++++++++++++
1 file changed, 45 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reset/mediatek,reset.txt

diff --git a/Documentation/devicetree/bindings/reset/mediatek,reset.txt b/Documentation/devicetree/bindings/reset/mediatek,reset.txt
new file mode 100644
index 0000000..3c5687b
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/mediatek,reset.txt
@@ -0,0 +1,45 @@
+MediaTek SoC Reset Controller
+======================================
+The reset controller driver accesses registers through the syscon regmap. It
+is a child node of syscon.
+
+Required properties:
+- compatible : "mediatek,reset"
+- #reset-cells: 1
+- reg: The register region can be accessed from syscon. The first parameter is
+ reset base address offset. The second parameter is byte width of reset registers.
+
+example:
+infracfg: syscon@10001000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mediatek,mt8135-infracfg", "syscon";
+ reg = <0 0x10001000 0 0x1000>;
+
+ infrarst: reset-controller@30 {
+ #reset-cells = <1>;
+ compatible = "mediatek,mt8135-infracfg-reset", "mediatek,reset";
+ reg = <0x30 0x8>;
+ };
+};
+
+Specifying reset lines connected to IP modules
+==============================================
+
+The reset controller(mtk-reset) manages various reset sources. Those device nodes should
+specify the reset line on the rstc in their resets property, containing a phandle to the
+rstc device node and a RESET_INDEX specifying which module to reset, as described in
+reset.txt.
+
+For MediaTek SoC, RESET_INDEX is reset bit defined in INFRACFG or PERICFG registers.
+
+example:
+pwrap: pwrap@1000f000 {
+ compatible = "mediatek,mt8135-pwrap";
+ reg = <0 0x1000f000 0 0x1000>,
+ <0 0x11017000 0 0x1000>;
+ reg-names = "pwrap-base",
+ "pwrap-bridge-base";
+ resets = <&infrarst 7>, <&perirst 34>;
+ reset-names = "infrarst", "perirst";
+};
--
1.8.1.1.dirty


\
 
 \ /
  Last update: 2014-11-03 10:41    [W:0.041 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site