lkml.org 
[lkml]   [2014]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 0/3] drm: describe display bus format
Hi,

On Tue, 18 Nov 2014 14:46:17 +0100
Boris Brezillon <boris.brezillon@free-electrons.com> wrote:

> Hello,
>
> This series makes use of the MEDIA_BUS_FMT definition to describe how
> the data are transmitted to the display.
>
> This will allow drivers to configure their output display bus according
> to the display capabilities.
> For example some display controllers support DPI (or raw RGB) connectors
> and need to specify which format will be transmitted on the DPI bus
> (RGB444, RGB565, RGB888, ...).
>
> This series also adds a field to the panel_desc struct so that one
> can specify which format is natevely supported by a panel.

Thierry, Laurent, Dave, can you take a look at this patch series: this
is the last missing dependency to get the atmel-hlcdc DRM driver
mainlined, and I was expecting to get this driver in 3.19...

Best Regards,

Boris

--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com


\
 
 \ /
  Last update: 2014-11-27 15:01    [W:0.070 / U:1.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site