lkml.org 
[lkml]   [2014]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3 5/5] tty/serial: Add Spreadtrum sc9836-uart driver support
From
2014-11-26 17:48 GMT+08:00 Tobias Klauser <tklauser@distanz.ch>:
> On 2014-11-25 at 13:16:58 +0100, Chunyan Zhang <chunyan.zhang@spreadtrum.com> wrote:

>> ---
[...]
>> +
>> +config SERIAL_SPRD_CONSOLE
>> + bool "SPRD UART console support"
>> + depends on SERIAL_SPRD=y
>> + select SERIAL_CORE_CONSOLE
>> + select SERIAL_EARLYCON
>> + help
>> + Support for early debug console using Spreadtrum's serial. This enables
>> + the console before standard serial driver is probed. This is enabled
>> + with "earlycon" on the kernel command line. The console is
>> + enabled when early_param is processed.
>> +
>> endmenu
>
> Please consistently use tabs instead of spaces for indentation. The help
> text should be indented by one tabe + 2 spaces.
>

OK, I will note it later.
[...]

>> +static inline int handle_lsr_errors(struct uart_port *port,
>> + unsigned int *flag, unsigned int *lsr)
>
> This line should be aligned with the opening ( above.
>
OK, will change.

>> +static inline void sprd_rx(int irq, void *dev_id)
>> +{
>> + struct uart_port *port = (struct uart_port *)dev_id;
>
> No need to cast a void pointer.
>

>> +static void sprd_console_write(struct console *co, const char *s,
>> + unsigned int count)
>> +{
>> + struct uart_port *port = (struct uart_port *)sprd_port[co->index];
>
> Better explicitly access the .port member of sprd_port[co->index] here
> instead of casting.
>

>> + port = (struct uart_port *)sprd_port[co->index];
>
> Same here, use the .port member of struct sprd_port[co->index].
>
>> + if (port == NULL) {
>> + pr_info("srial port %d not yet initialized\n", co->index);
>
> Typo: should be serial instead of srial.
>

>> + up->mapbase = mem->start;
>> + up->membase = ioremap(mem->start, resource_size(mem));
>
> Return value of ioremap() should be checked for NULL.
>
>> +static int sprd_resume(struct platform_device *dev)
>> +{
>> + int id = dev->id;
>> + struct uart_port *port = (struct uart_port *)sprd_port[id];
>
> Access the .port member instead of the cast.
>
OK, will change all of the problems you pointed out in v4.
Thanks for your review.

Chunyan


\
 
 \ /
  Last update: 2014-11-27 13:21    [W:0.276 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site