lkml.org 
[lkml]   [2014]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/4] GMAC: add driver for Rockchip RK3288 SoCs integrated GMAC
On 11/26/2014 3:29 AM, Roger wrote:
> Hi! Giuseppe CAVALLARO
>
> 在 2014/11/25 18:05, Giuseppe CAVALLARO 写道:
>> Hello Roger
>>
>> thx for these patches, my comments inline below
>>
>> On 11/25/2014 10:07 AM, Roger Chen wrote:
>>> This driver is based on stmmac driver.
>>>
>>> Signed-off-by: Roger Chen <roger.chen@rock-chips.com>
>>> ---
>>> drivers/net/ethernet/stmicro/stmmac/Makefile | 2 +-
>>> drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 629
>>> ++++++++++++++++++++
>>> .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 3 +
>>> .../net/ethernet/stmicro/stmmac/stmmac_platform.h | 1 +
>>> 4 files changed, 634 insertions(+), 1 deletion(-)
>>> create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
>>>
>>> diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile
>>> b/drivers/net/ethernet/stmicro/stmmac/Makefile
>>> index ac4d562..73c2715 100644
>>> --- a/drivers/net/ethernet/stmicro/stmmac/Makefile
>>> +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
>>> @@ -6,7 +6,7 @@ stmmac-objs:= stmmac_main.o stmmac_ethtool.o
>>> stmmac_mdio.o ring_mode.o \
>>>
>>> obj-$(CONFIG_STMMAC_PLATFORM) += stmmac-platform.o
>>> stmmac-platform-objs:= stmmac_platform.o dwmac-meson.o
>>> dwmac-sunxi.o \
>>> - dwmac-sti.o dwmac-socfpga.o
>>> + dwmac-sti.o dwmac-socfpga.o dwmac-rk.o
>>>
>>> obj-$(CONFIG_STMMAC_PCI) += stmmac-pci.o
>>> stmmac-pci-objs:= stmmac_pci.o
>>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
>>> b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
>>> new file mode 100644
>>> index 0000000..9e50b37
>>> --- /dev/null
>>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
>>> @@ -0,0 +1,629 @@
>>> +/**
>>> + * dwmac-rk.c - Rockchip RK3288 DWMAC specific glue layer
>>> + *
>>> + * Copyright (C) 2014 Chen-Zhi (Roger Chen)
>>> + *
>>> + * Chen-Zhi (Roger Chen) <roger.chen@rock-chips.com>
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License as published by
>>> + * the Free Software Foundation; either version 2 of the License, or
>>> + * (at your option) any later version.
>>> + *
>>> + * This program is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + */
>>> +
>>> +#include <linux/stmmac.h>
>>> +#include <linux/clk.h>
>>> +#include <linux/phy.h>
>>> +#include <linux/of_net.h>
>>> +#include <linux/gpio.h>
>>> +#include <linux/of_gpio.h>
>>> +#include <linux/of_device.h>
>>> +#include <linux/regulator/consumer.h>
>>> +#include <linux/delay.h>
>>> +#include <linux/regmap.h>
>>> +#include <linux/mfd/syscon.h>
>>> +
>>> +struct rk_priv_data {
>>> + struct platform_device *pdev;
>>> + int phy_iface;
>>> + bool power_ctrl_by_pmu;
>>> + char pmu_regulator[32];
>>> + int pmu_enable_level;
>>> +
>>> + int power_io;
>>> + int power_io_level;
>>> + int reset_io;
>>> + int reset_io_level;
>>> + int phyirq_io;
>>> + int phyirq_io_level;
>>> +
>>> + bool clk_enabled;
>>> + bool clock_input;
>>> +
>>> + struct clk *clk_mac;
>>> + struct clk *clk_mac_pll;
>>> + struct clk *gmac_clkin;
>>> + struct clk *mac_clk_rx;
>>> + struct clk *mac_clk_tx;
>>> + struct clk *clk_mac_ref;
>>> + struct clk *clk_mac_refout;
>>> + struct clk *aclk_mac;
>>> + struct clk *pclk_mac;
>>> +
>>> + int tx_delay;
>>> + int rx_delay;
>>> +
>>> + struct regmap *grf;
>>> +};
>>> +
>>> +#define RK3288_GRF_SOC_CON1 0x0248
>>> +#define RK3288_GRF_SOC_CON3 0x0250
>>> +#define RK3288_GRF_GPIO3D_E 0x01ec
>>> +#define RK3288_GRF_GPIO4A_E 0x01f0
>>> +#define RK3288_GRF_GPIO4B_E 0x01f4
>>> +
>>> +/*RK3288_GRF_SOC_CON1*/
>>> +#define GMAC_PHY_INTF_SEL_RGMII ((0x01C0 << 16) | (0x0040))
>>> +#define GMAC_PHY_INTF_SEL_RMII ((0x01C0 << 16) | (0x0100))
>>> +#define GMAC_FLOW_CTRL ((0x0200 << 16) | (0x0200))
>>> +#define GMAC_FLOW_CTRL_CLR ((0x0200 << 16) | (0x0000))
>>> +#define GMAC_SPEED_10M ((0x0400 << 16) | (0x0000))
>>> +#define GMAC_SPEED_100M ((0x0400 << 16) | (0x0400))
>>> +#define GMAC_RMII_CLK_25M ((0x0800 << 16) | (0x0800))
>>> +#define GMAC_RMII_CLK_2_5M ((0x0800 << 16) | (0x0000))
>>> +#define GMAC_CLK_125M ((0x3000 << 16) | (0x0000))
>>> +#define GMAC_CLK_25M ((0x3000 << 16) | (0x3000))
>>> +#define GMAC_CLK_2_5M ((0x3000 << 16) | (0x2000))
>>> +#define GMAC_RMII_MODE ((0x4000 << 16) | (0x4000))
>>> +#define GMAC_RMII_MODE_CLR ((0x4000 << 16) | (0x0000))
>>> +
>>> +/*RK3288_GRF_SOC_CON3*/
>>> +#define GMAC_TXCLK_DLY_ENABLE ((0x4000 << 16) | (0x4000))
>>> +#define GMAC_TXCLK_DLY_DISABLE ((0x4000 << 16) | (0x0000))
>>> +#define GMAC_RXCLK_DLY_ENABLE ((0x8000 << 16) | (0x8000))
>>> +#define GMAC_RXCLK_DLY_DISABLE ((0x8000 << 16) | (0x0000))
>>> +#define GMAC_CLK_RX_DL_CFG(val) ((0x3F80 << 16) | (val<<7))
>>> +#define GMAC_CLK_TX_DL_CFG(val) ((0x007F << 16) | (val))
>>
>> why do not use BIT and BIT_MASK where possible?
>>
>>> +static void set_to_rgmii(struct rk_priv_data *bsp_priv,
>>> + int tx_delay, int rx_delay)
>>> +{
>>> + if (IS_ERR(bsp_priv->grf)) {
>>> + pr_err("%s: Missing rockchip,grf property\n", __func__);
>>> + return;
>>> + }
>>> +
>>> + regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
>>> + GMAC_PHY_INTF_SEL_RGMII);
>>> + regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
>>> + GMAC_RMII_MODE_CLR);
>>
>> maybe you could perform just one write unless there is some HW
>> constraint.
>>
>>> + regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON3,
>>> + GMAC_RXCLK_DLY_ENABLE);
>>> + regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON3,
>>> + GMAC_TXCLK_DLY_ENABLE);
>>> + regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON3,
>>> + GMAC_CLK_RX_DL_CFG(rx_delay));
>>> + regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON3,
>>> + GMAC_CLK_TX_DL_CFG(tx_delay));
>>
>> ditto
>>
>>> +
>>> + regmap_write(bsp_priv->grf, RK3288_GRF_GPIO3D_E, 0xFFFFFFFF);
>>> + regmap_write(bsp_priv->grf, RK3288_GRF_GPIO4B_E,
>>> + 0x3<<2<<16 | 0x3<<2);
>>
>> pls use macros, these shift sequence is really help to decode
>>
>>> + regmap_write(bsp_priv->grf, RK3288_GRF_GPIO4A_E, 0xFFFFFFFF);
>>> +
>>> + pr_info("%s: tx delay=0x%x; rx delay=0x%x;\n",
>>> + __func__, tx_delay, rx_delay);
>>
>> may I suggest pr_debug?
>>
>>> +}
>>> +
>>> +static void set_to_rmii(struct rk_priv_data *bsp_priv)
>>> +{
>>> + if (IS_ERR(bsp_priv->grf)) {
>>> + pr_err("%s: Missing rockchip,grf property\n", __func__);
>>> + return;
>>> + }
>>> +
>>> + regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
>>> + GMAC_PHY_INTF_SEL_RMII);
>>> + regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
>>> + GMAC_RMII_MODE);
>>> +}
>>> +
>>> +static void set_rgmii_speed(struct rk_priv_data *bsp_priv, int speed)
>>> +{
>>> + if (IS_ERR(bsp_priv->grf)) {
>>> + pr_err("%s: Missing rockchip,grf property\n", __func__);
>>> + return;
>>> + }
>>> +
>>> + if (speed == 10)
>>> + regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
>>> GMAC_CLK_2_5M);
>>> + else if (speed == 100)
>>> + regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1, GMAC_CLK_25M);
>>> + else if (speed == 1000)
>>> + regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
>>> GMAC_CLK_125M);
>>> + else
>>> + pr_err("unknown speed value for RGMII! speed=%d", speed);
>>> +}
>>> +
>>> +static void set_rmii_speed(struct rk_priv_data *bsp_priv, int speed)
>>> +{
>>> + if (IS_ERR(bsp_priv->grf)) {
>>> + pr_err("%s: Missing rockchip,grf property\n", __func__);
>>> + return;
>>> + }
>>> +
>>> + if (speed == 10) {
>>> + regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
>>> + GMAC_RMII_CLK_2_5M);
>>> + regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
>>> + GMAC_SPEED_10M);
>>> + } else if (speed == 100) {
>>> + regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
>>> + GMAC_RMII_CLK_25M);
>>> + regmap_write(bsp_priv->grf, RK3288_GRF_SOC_CON1,
>>> + GMAC_SPEED_100M);
>>> + } else {
>>> + pr_err("unknown speed value for RMII! speed=%d", speed);
>>> + }
>>> +}
>>> +
>>> +#define MAC_CLK_RX "mac_clk_rx"
>>> +#define MAC_CLK_TX "mac_clk_tx"
>>> +#define CLK_MAC_REF "clk_mac_ref"
>>> +#define CLK_MAC_REF_OUT "clk_mac_refout"
>>> +#define CLK_MAC_PLL "clk_mac_pll"
>>> +#define ACLK_MAC "aclk_mac"
>>> +#define PCLK_MAC "pclk_mac"
>>> +#define MAC_CLKIN "ext_gmac"
>>> +#define CLK_MAC "stmmaceth"
>>
>> Concerning the clocks, the "stmmaceth" is actually used for the main
>> clock so maybe you should use another name.
>>
> in stmmac_main.c, clk "stmmaceth"(STMMAC_RESOURCE_NAME) is used to be
> the source of priv->clk_csr.
> priv->stmmac_clk = devm_clk_get(priv->device, STMMAC_RESOURCE_NAME);
> so I have to define a kind of clock named "stmmaceth".

ok

I was a bit confused because I had seen that you manage it as parent
so I believed it was for phy clock.

>
>> See: Documentation/devicetree/bindings/net/stmmac.txt
>>
>> For St platforms, it has been used: sti-ethclk but we could
>> used a common and better name: stmmac-phyclk
>> And I could also propose this change on STi glue-logic.
>>
>> Then, I think that all the clock macros above should be documented
>> and maybe managed at DT level, what do you think?
>>
>>> +
>>> +int gmac_clk_init(struct rk_priv_data *bsp_priv)
>>> +{
>>> + struct device *dev = &bsp_priv->pdev->dev;
>>> +
>>> + bsp_priv->clk_enabled = false;
>>> +
>>> + bsp_priv->mac_clk_rx = clk_get(dev, MAC_CLK_RX);
>>> + if (IS_ERR(bsp_priv->mac_clk_rx))
>>> + pr_warn("%s: warning: cannot get clock %s\n",
>>> + __func__, MAC_CLK_RX);
>>> +
>>> + bsp_priv->mac_clk_tx = clk_get(dev, MAC_CLK_TX);
>>> + if (IS_ERR(bsp_priv->mac_clk_tx))
>>> + pr_warn("%s: warning: cannot get clock %s\n",
>>> + __func__, MAC_CLK_TX);
>>> +
>>> + bsp_priv->clk_mac_ref = clk_get(dev, CLK_MAC_REF);
>>> + if (IS_ERR(bsp_priv->clk_mac_ref))
>>> + pr_warn("%s: warning: cannot get clock %s\n",
>>> + __func__, CLK_MAC_REF);
>>> +
>>> + bsp_priv->clk_mac_refout = clk_get(dev, CLK_MAC_REF_OUT);
>>> + if (IS_ERR(bsp_priv->clk_mac_refout))
>>> + pr_warn("%s: warning:cannot get clock %s\n",
>>> + __func__, CLK_MAC_REF_OUT);
>>> +
>>> + bsp_priv->aclk_mac = clk_get(dev, ACLK_MAC);
>>> + if (IS_ERR(bsp_priv->aclk_mac))
>>> + pr_warn("%s: warning: cannot get clock %s\n",
>>> + __func__, ACLK_MAC);
>>> +
>>> + bsp_priv->pclk_mac = clk_get(dev, PCLK_MAC);
>>> + if (IS_ERR(bsp_priv->pclk_mac))
>>> + pr_warn("%s: warning: cannot get clock %s\n",
>>> + __func__, PCLK_MAC);
>>> +
>>> + bsp_priv->clk_mac_pll = clk_get(dev, CLK_MAC_PLL);
>>> + if (IS_ERR(bsp_priv->clk_mac_pll))
>>> + pr_warn("%s: warning: cannot get clock %s\n",
>>> + __func__, CLK_MAC_PLL);
>>> +
>>> + bsp_priv->gmac_clkin = clk_get(dev, MAC_CLKIN);
>>> + if (IS_ERR(bsp_priv->gmac_clkin))
>>> + pr_warn("%s: warning: cannot get clock %s\n",
>>> + __func__, MAC_CLKIN);
>>> +
>>> + bsp_priv->clk_mac = clk_get(dev, CLK_MAC);
>>> + if (IS_ERR(bsp_priv->clk_mac))
>>> + pr_warn("%s: warning: cannot get clock %s\n",
>>> + __func__, CLK_MAC);
>>> +
>>> + if (bsp_priv->clock_input) {
>>> + pr_info("%s: clock input from PHY\n", __func__);
>>> + } else {
>>> + if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII)
>>> + clk_set_rate(bsp_priv->clk_mac_pll, 50000000);
>>> +
>>> + clk_set_parent(bsp_priv->clk_mac, bsp_priv->clk_mac_pll);
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int gmac_clk_enable(struct rk_priv_data *bsp_priv, bool enable)
>>> +{
>>> + int phy_iface = phy_iface = bsp_priv->phy_iface;
>>> +
>>> + if (enable) {
>>> + if (!bsp_priv->clk_enabled) {
>>> + if (phy_iface == PHY_INTERFACE_MODE_RMII) {
>>> + if (!IS_ERR(bsp_priv->mac_clk_rx))
>>> + clk_prepare_enable(
>>> + bsp_priv->mac_clk_rx);
>>> +
>>> + if (!IS_ERR(bsp_priv->clk_mac_ref))
>>> + clk_prepare_enable(
>>> + bsp_priv->clk_mac_ref);
>>> +
>>> + if (!IS_ERR(bsp_priv->clk_mac_refout))
>>> + clk_prepare_enable(
>>> + bsp_priv->clk_mac_refout);
>>> + }
>>> +
>>> + if (!IS_ERR(bsp_priv->aclk_mac))
>>> + clk_prepare_enable(bsp_priv->aclk_mac);
>>> +
>>> + if (!IS_ERR(bsp_priv->pclk_mac))
>>> + clk_prepare_enable(bsp_priv->pclk_mac);
>>> +
>>> + if (!IS_ERR(bsp_priv->mac_clk_tx))
>>> + clk_prepare_enable(bsp_priv->mac_clk_tx);
>>> +
>>> + /**
>>> + * if (!IS_ERR(bsp_priv->clk_mac))
>>> + * clk_prepare_enable(bsp_priv->clk_mac);
>>> + */
>>
>> why do you need to comment this? could it be related to the stmmaceth
>> clk that is used by the main?
>>
> yes. the same explanation as above
>>> + mdelay(5);
>>
>> hmm, do you actually need this mdelay? Is it to stabilize PLL sources?
>>
> yes.
>>> + bsp_priv->clk_enabled = true;
>>> + }
>>> + } else {
>>> + if (bsp_priv->clk_enabled) {
>>> + if (phy_iface == PHY_INTERFACE_MODE_RMII) {
>>> + if (!IS_ERR(bsp_priv->mac_clk_rx))
>>> + clk_disable_unprepare(
>>> + bsp_priv->mac_clk_rx);
>>> +
>>> + if (!IS_ERR(bsp_priv->clk_mac_ref))
>>> + clk_disable_unprepare(
>>> + bsp_priv->clk_mac_ref);
>>> +
>>> + if (!IS_ERR(bsp_priv->clk_mac_refout))
>>> + clk_disable_unprepare(
>>> + bsp_priv->clk_mac_refout);
>>> + }
>>> +
>>> + if (!IS_ERR(bsp_priv->aclk_mac))
>>> + clk_disable_unprepare(bsp_priv->aclk_mac);
>>> +
>>> + if (!IS_ERR(bsp_priv->pclk_mac))
>>> + clk_disable_unprepare(bsp_priv->pclk_mac);
>>> +
>>> + if (!IS_ERR(bsp_priv->mac_clk_tx))
>>> + clk_disable_unprepare(bsp_priv->mac_clk_tx);
>>> + /**
>>> + * if (!IS_ERR(bsp_priv->clk_mac))
>>> + * clk_disable_unprepare(bsp_priv->clk_mac);
>>> + */
>>> + bsp_priv->clk_enabled = false;
>>> + }
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int power_on_by_pmu(struct rk_priv_data *bsp_priv, bool enable)
>>> +{
>>> + struct regulator *ldo;
>>> + char *ldostr = bsp_priv->pmu_regulator;
>>> + int ret;
>>> +
>>> + if (!ldostr) {
>>> + pr_err("%s: no ldo found\n", __func__);
>>> + return -1;
>>> + }
>>> +
>>> + ldo = regulator_get(NULL, ldostr);
>>> + if (!ldo) {
>>> + pr_err("\n%s get ldo %s failed\n", __func__, ldostr);
>>> + } else {
>>> + if (enable) {
>>> + if (!regulator_is_enabled(ldo)) {
>>> + regulator_set_voltage(ldo, 3300000, 3300000);
>>> + ret = regulator_enable(ldo);
>>> + if (ret != 0)
>>> + pr_err("%s: fail to enable %s\n",
>>> + __func__, ldostr);
>>> + else
>>> + pr_info("turn on ldo done.\n");
>>> + } else {
>>> + pr_warn("%s is enabled before enable", ldostr);
>>> + }
>>> + } else {
>>> + if (regulator_is_enabled(ldo)) {
>>> + ret = regulator_disable(ldo);
>>> + if (ret != 0)
>>> + pr_err("%s: fail to disable %s\n",
>>> + __func__, ldostr);
>>> + else
>>> + pr_info("turn off ldo done.\n");
>>> + } else {
>>> + pr_warn("%s is disabled before disable",
>>> + ldostr);
>>> + }
>>> + }
>>> + regulator_put(ldo);
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int power_on_by_gpio(struct rk_priv_data *bsp_priv, bool enable)
>>> +{
>>> + if (enable) {
>>> + /*power on*/
>>> + if (gpio_is_valid(bsp_priv->power_io))
>>> + gpio_direction_output(bsp_priv->power_io,
>>> + bsp_priv->power_io_level);
>>> + } else {
>>> + /*power off*/
>>> + if (gpio_is_valid(bsp_priv->power_io))
>>> + gpio_direction_output(bsp_priv->power_io,
>>> + !bsp_priv->power_io_level);
>>> + }
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int phy_power_on(struct rk_priv_data *bsp_priv, bool enable)
>>> +{
>>> + int ret = -1;
>>> +
>>> + pr_info("Ethernet PHY power %s\n", enable == 1 ? "on" : "off");
>>> +
>>> + if (bsp_priv->power_ctrl_by_pmu)
>>> + ret = power_on_by_pmu(bsp_priv, enable);
>>> + else
>>> + ret = power_on_by_gpio(bsp_priv, enable);
>>> +
>>> + if (enable) {
>>> + /*reset*/
>>> + if (gpio_is_valid(bsp_priv->reset_io)) {
>>> + gpio_direction_output(bsp_priv->reset_io,
>>> + bsp_priv->reset_io_level);
>>> + mdelay(5);
>>> + gpio_direction_output(bsp_priv->reset_io,
>>> + !bsp_priv->reset_io_level);
>>> + }
>>> + mdelay(30);
>>> +
>>> + } else {
>>> + /*pull down reset*/
>>> + if (gpio_is_valid(bsp_priv->reset_io)) {
>>> + gpio_direction_output(bsp_priv->reset_io,
>>> + bsp_priv->reset_io_level);
>>> + }
>>> + }
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +#define GPIO_PHY_POWER "gmac_phy_power"
>>> +#define GPIO_PHY_RESET "gmac_phy_reset"
>>> +#define GPIO_PHY_IRQ "gmac_phy_irq"
>>> +
>>> +static void *rk_gmac_setup(struct platform_device *pdev)
>>> +{
>>> + struct rk_priv_data *bsp_priv;
>>> + struct device *dev = &pdev->dev;
>>> + enum of_gpio_flags flags;
>>> + int ret;
>>> + const char *strings = NULL;
>>> + int value;
>>> + int irq;
>>> +
>>> + bsp_priv = devm_kzalloc(dev, sizeof(*bsp_priv), GFP_KERNEL);
>>> + if (!bsp_priv)
>>> + return ERR_PTR(-ENOMEM);
>>> +
>>> + bsp_priv->phy_iface = of_get_phy_mode(dev->of_node);
>>> +
>>> + ret = of_property_read_string(dev->of_node, "pmu_regulator",
>>> &strings);
>>> + if (ret) {
>>> + pr_err("%s: Can not read property: pmu_regulator.\n",
>>> __func__);
>>> + bsp_priv->power_ctrl_by_pmu = false;
>>> + } else {
>>> + pr_info("%s: ethernet phy power controlled by pmu(%s).\n",
>>> + __func__, strings);
>>> + bsp_priv->power_ctrl_by_pmu = true;
>>> + strcpy(bsp_priv->pmu_regulator, strings);
>>> + }
>>> +
>>> + ret = of_property_read_u32(dev->of_node, "pmu_enable_level",
>>> &value);
>>> + if (ret) {
>>> + pr_err("%s: Can not read property: pmu_enable_level.\n",
>>> + __func__);
>>> + bsp_priv->power_ctrl_by_pmu = false;
>>> + } else {
>>> + pr_info("%s: PHY power controlled by pmu(level = %s).\n",
>>> + __func__, (value == 1) ? "HIGH" : "LOW");
>>> + bsp_priv->power_ctrl_by_pmu = true;
>>> + bsp_priv->pmu_enable_level = value;
>>> + }
>>> +
>>> + ret = of_property_read_string(dev->of_node, "clock_in_out",
>>> &strings);
>>> + if (ret) {
>>> + pr_err("%s: Can not read property: clock_in_out.\n", __func__);
>>> + bsp_priv->clock_input = true;
>>> + } else {
>>> + pr_info("%s: clock input or output? (%s).\n",
>>> + __func__, strings);
>>> + if (!strcmp(strings, "input"))
>>> + bsp_priv->clock_input = true;
>>> + else
>>> + bsp_priv->clock_input = false;
>>> + }
>>> +
>>> + ret = of_property_read_u32(dev->of_node, "tx_delay", &value);
>>> + if (ret) {
>>> + bsp_priv->tx_delay = 0x30;
>>> + pr_err("%s: Can not read property: tx_delay.", __func__);
>>> + pr_err("%s: set tx_delay to 0x%x\n",
>>> + __func__, bsp_priv->tx_delay);
>>> + } else {
>>> + pr_info("%s: TX delay(0x%x).\n", __func__, value);
>>> + bsp_priv->tx_delay = value;
>>> + }
>>> +
>>> + ret = of_property_read_u32(dev->of_node, "rx_delay", &value);
>>> + if (ret) {
>>> + bsp_priv->rx_delay = 0x10;
>>> + pr_err("%s: Can not read property: rx_delay.", __func__);
>>> + pr_err("%s: set rx_delay to 0x%x\n",
>>> + __func__, bsp_priv->rx_delay);
>>> + } else {
>>> + pr_info("%s: RX delay(0x%x).\n", __func__, value);
>>> + bsp_priv->rx_delay = value;
>>> + }
>>> +
>>> + bsp_priv->grf = syscon_regmap_lookup_by_phandle(dev->of_node,
>>> + "rockchip,grf");
>>> + if (IS_ERR(bsp_priv->grf))
>>> + dev_err(&pdev->dev, "Missing rockchip,grf property\n");
>>
>> I wonder if you can fail on here and save all the check in
>> set_rgmii_speed etc.
>> Maybe this can be considered a mandatory property for the glue-logic.
>>
> about fail check, you mean "if(IS_ERR(bsp_priv->grf))" ?
> or all of the return value of of_property_*

I meant about the grf only.

Peppe

>>> +
>>> + bsp_priv->phyirq_io =
>>> + of_get_named_gpio_flags(dev->of_node,
>>> + "phyirq-gpio", 0, &flags);
>>> + bsp_priv->phyirq_io_level = (flags & OF_GPIO_ACTIVE_LOW) ? 0 : 1;
>>
>>
>> Sorry, did you document all in Documentation/devicetree/bindings/net/ ?
>>
>>> +
>>> + bsp_priv->reset_io =
>>> + of_get_named_gpio_flags(dev->of_node,
>>> + "reset-gpio", 0, &flags);
>>> + bsp_priv->reset_io_level = (flags & OF_GPIO_ACTIVE_LOW) ? 0 : 1;
>>> +
>>> + bsp_priv->power_io =
>>> + of_get_named_gpio_flags(dev->of_node, "power-gpio", 0, &flags);
>>> + bsp_priv->power_io_level = (flags & OF_GPIO_ACTIVE_LOW) ? 0 : 1;
>>> +
>>> + /*power*/
>>> + if (!gpio_is_valid(bsp_priv->power_io)) {
>>> + pr_err("%s: Failed to get GPIO %s.\n",
>>> + __func__, "power-gpio");
>>> + } else {
>>> + ret = gpio_request(bsp_priv->power_io, GPIO_PHY_POWER);
>>> + if (ret)
>>> + pr_err("%s: ERROR: Failed to request GPIO %s.\n",
>>> + __func__, GPIO_PHY_POWER);
>>> + }
>>> +
>>> + if (!gpio_is_valid(bsp_priv->reset_io)) {
>>> + pr_err("%s: ERROR: Get reset-gpio failed.\n", __func__);
>>> + } else {
>>> + ret = gpio_request(bsp_priv->reset_io, GPIO_PHY_RESET);
>>> + if (ret)
>>> + pr_err("%s: ERROR: Failed to request GPIO %s.\n",
>>> + __func__, GPIO_PHY_RESET);
>>> + }
>>> +
>>> + if (bsp_priv->phyirq_io > 0) {
>>> + struct plat_stmmacenet_data *plat_dat;
>>> +
>>> + pr_info("PHY irq in use\n");
>>> + ret = gpio_request(bsp_priv->phyirq_io, GPIO_PHY_IRQ);
>>> + if (ret < 0) {
>>> + pr_warn("%s: Failed to request GPIO %s\n",
>>> + __func__, GPIO_PHY_IRQ);
>>> + goto goon;
>>> + }
>>> +
>>> + ret = gpio_direction_input(bsp_priv->phyirq_io);
>>> + if (ret < 0) {
>>> + pr_err("%s, Failed to set input for GPIO %s\n",
>>> + __func__, GPIO_PHY_IRQ);
>>> + gpio_free(bsp_priv->phyirq_io);
>>> + goto goon;
>>> + }
>>> +
>>> + irq = gpio_to_irq(bsp_priv->phyirq_io);
>>> + if (irq < 0) {
>>> + ret = irq;
>>> + pr_err("Failed to set irq for %s\n",
>>> + GPIO_PHY_IRQ);
>>> + gpio_free(bsp_priv->phyirq_io);
>>> + goto goon;
>>> + }
>>> +
>>> + plat_dat = dev_get_platdata(&pdev->dev);
>>> + if (plat_dat)
>>> + plat_dat->mdio_bus_data->probed_phy_irq = irq;
>>> + else
>>> + pr_err("%s: plat_data is NULL\n", __func__);
>>> + }
>>> +
>>> +goon:
>>> + /*rmii or rgmii*/
>>> + if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RGMII) {
>>> + pr_info("%s: init for RGMII\n", __func__);
>>> + set_to_rgmii(bsp_priv, bsp_priv->tx_delay, bsp_priv->rx_delay);
>>> + } else if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII) {
>>> + pr_info("%s: init for RMII\n", __func__);
>>> + set_to_rmii(bsp_priv);
>>> + } else {
>>> + pr_err("%s: ERROR: NO interface defined!\n", __func__);
>>> + }
>>> +
>>> + bsp_priv->pdev = pdev;
>>> +
>>> + gmac_clk_init(bsp_priv);
>>> +
>>> + return bsp_priv;
>>> +}
>>> +
>>> +static int rk_gmac_init(struct platform_device *pdev, void *priv)
>>> +{
>>> + struct rk_priv_data *bsp_priv = priv;
>>> + int ret;
>>> +
>>> + ret = phy_power_on(bsp_priv, true);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + ret = gmac_clk_enable(bsp_priv, true);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static void rk_gmac_exit(struct platform_device *pdev, void *priv)
>>> +{
>>> + struct rk_priv_data *gmac = priv;
>>> +
>>> + phy_power_on(gmac, false);
>>> + gmac_clk_enable(gmac, false);
>>> +}
>>> +
>>> +static void rk_fix_speed(void *priv, unsigned int speed)
>>> +{
>>> + struct rk_priv_data *bsp_priv = priv;
>>> +
>>> + if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RGMII)
>>> + set_rgmii_speed(bsp_priv, speed);
>>> + else if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII)
>>> + set_rmii_speed(bsp_priv, speed);
>>> + else
>>> + pr_err("unsupported interface %d", bsp_priv->phy_iface);
>>> +}
>>> +
>>> +const struct stmmac_of_data rk_gmac_data = {
>>> + .has_gmac = 1,
>>> + .tx_coe = 1,
>>
>> FYI, on new gmac there is the HW capability register to dinamically
>> provide you if coe is supported.
>>
>> IMO you should add the OF "compatible" string and in case of mac
>> newer than the 3.50a you can remove coe.
>>
>>
>> BR
>> Peppe
>>
>>> + .fix_mac_speed = rk_fix_speed,
>>> + .setup = rk_gmac_setup,
>>> + .init = rk_gmac_init,
>>> + .exit = rk_gmac_exit,
>>> +};
>>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>>> b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>>> index 15814b7..b4dee96 100644
>>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
>>> @@ -33,6 +33,7 @@
>>>
>>> static const struct of_device_id stmmac_dt_ids[] = {
>>> /* SoC specific glue layers should come before generic bindings */
>>> + { .compatible = "rockchip,rk3288-gmac", .data = &rk_gmac_data},
>>> { .compatible = "amlogic,meson6-dwmac", .data =
>>> &meson6_dwmac_data},
>>> { .compatible = "allwinner,sun7i-a20-gmac", .data =
>>> &sun7i_gmac_data},
>>> { .compatible = "st,stih415-dwmac", .data = &stih4xx_dwmac_data},
>>> @@ -291,6 +292,8 @@ static int stmmac_pltfr_probe(struct
>>> platform_device *pdev)
>>> return -ENOMEM;
>>> }
>>>
>>> + pdev->dev.platform_data = plat_dat;
>>> +
>>> ret = stmmac_probe_config_dt(pdev, plat_dat, &mac);
>>> if (ret) {
>>> pr_err("%s: main dt probe failed", __func__);
>>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
>>> b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
>>> index 25dd1f7..32a0516 100644
>>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
>>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
>>> @@ -24,5 +24,6 @@ extern const struct stmmac_of_data sun7i_gmac_data;
>>> extern const struct stmmac_of_data stih4xx_dwmac_data;
>>> extern const struct stmmac_of_data stid127_dwmac_data;
>>> extern const struct stmmac_of_data socfpga_gmac_data;
>>> +extern const struct stmmac_of_data rk_gmac_data;
>>>
>>> #endif /* __STMMAC_PLATFORM_H__ */
>>>
>>
>>
>>
>>
>
>
>



\
 
 \ /
  Last update: 2014-11-26 18:41    [W:0.049 / U:1.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site