lkml.org 
[lkml]   [2014]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4] clocksource: arch_timer: Allow the device tree to specify uninitialized timer registers
From
Date
On Wed, 2014-10-08 at 15:33 +0800, Sonny Rao wrote:
> From: Doug Anderson <dianders@chromium.org>
>
> Some 32-bit (ARMv7) systems are architected like this:
>
> * The firmware doesn't know and doesn't care about hypervisor mode and
> we don't want to add the complexity of hypervisor there.
>
> * The firmware isn't involved in SMP bringup or resume.
>
> * The ARCH timer come up with an uninitialized offset (CNTVOFF)
> between the virtual and physical counters. Each core gets a
> different random offset.
>
> * The device boots in "Secure SVC" mode.
>
> * Nothing has touched the reset value of CNTHCTL.PL1PCEN or
> CNTHCTL.PL1PCTEN (both default to 1 at reset)
>
> On systems like the above, it doesn't make sense to use the virtual
> counter. There's nobody managing the offset and each time a core goes
> down and comes back up it will get reinitialized to some other random
> value.
>
> This adds an optional property which can inform the kernel of this
> situation, and firmware is free to remove the property if it is going
> to initialize the CNTVOFF registers when each CPU comes out of reset.
>
> Currently, the best course of action in this case is to use the
> physical timer, which is why it is important that CNTHCTL hasn't been
> changed from its reset value and it's a reasonable assumption given
> that the firmware has never entered HYP mode.
>
> Note that it's been said that on ARMv8 systems the firmware and
> kernel really can't be architected as described above. That means
> using the physical timer like this really only makes sense for ARMv7
> systems.
>
> Signed-off-by: Doug Anderson <dianders@chromium.org>
> Signed-off-by: Sonny Rao <sonnyrao@chromium.org>
> Reviewed-by: Mark Rutland <mark.rutland@arm.com>
> ---
> Changes in v2:
> - Add "#ifdef CONFIG_ARM" as per Will Deacon
>
> Changes in v3:
> - change property name to arm,cntvoff-not-fw-configured and specify
> that the value of CNTHCTL.PL1PC(T)EN must still be the reset value
> of 1 as per Mark Rutland
>
> Changes in v4:
> - change property name to arm,cpu-registers-not-fw-configured and
> specify that all cpu registers must have architected reset values
> per Mark Rutland
> - change from "#ifdef CONFIG_ARM" to "if (IS_ENABLED(CONFIG_ARM))" per
> Arnd Bergmann
> ---
> Documentation/devicetree/bindings/arm/arch_timer.txt | 8 ++++++++
> drivers/clocksource/arm_arch_timer.c | 8 ++++++++
> 2 files changed, 16 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/arch_timer.txt b/Documentation/devicetree/bindings/arm/arch_timer.txt
> index 37b2caf..256b4d8 100644
> --- a/Documentation/devicetree/bindings/arm/arch_timer.txt
> +++ b/Documentation/devicetree/bindings/arm/arch_timer.txt
> @@ -22,6 +22,14 @@ to deliver its interrupts via SPIs.
> - always-on : a boolean property. If present, the timer is powered through an
> always-on power domain, therefore it never loses context.
>
> +** Optional properties:
> +
> +- arm,cpu-registers-not-fw-configured : Firmware does not initialize
> + any of the generic timer CPU registers, which contain their
> + architecturally-defined reset values. Only supported for 32-bit
> + systems which follow the ARMv7 architected reset values.
> +
> +

Hi,

Sorry for the (very) late reply.
I just realize today MT8135 need this and the other patch [1] to boot
SMP correctly. I've applied both patches and they works fine. Thanks :)

However, I'm not sure if we really need to add new property.
arm_arch_timer driver will only use virtual timer when virtual PPI
interrupt is provided, so the following patch to timer dtsi will also
works. I think if the firmware doesn't support virtual timer, it make
sense to not supply virtual interrupt.

timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>;
clock-frequency = <13000000>;
};

Joe.C

[1]
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-November/305436.html




\
 
 \ /
  Last update: 2014-11-26 16:21    [W:0.129 / U:0.700 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site