lkml.org 
[lkml]   [2014]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/2] arm64: Add Juno board device tree.
Hi Liviu,

On 11/11/14 17:32, Liviu Dudau wrote:
> This adds support for ARM's Juno development board (rev 0).
> It enables most of the board peripherals: UART, I2C, USB, MMC and
> 100Mb ethernet. There is no support at the moment for clock setting
> and HDLCD driver which depends on it.
>
> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
> ---
> arch/arm64/boot/dts/arm/Makefile | 1 +
> arch/arm64/boot/dts/arm/juno-clocks.dtsi | 45 ++++++
> arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 129 +++++++++++++++
> arch/arm64/boot/dts/arm/juno.dts | 218 ++++++++++++++++++++++++++
> 4 files changed, 393 insertions(+)
> create mode 100644 arch/arm64/boot/dts/arm/juno-clocks.dtsi
> create mode 100644 arch/arm64/boot/dts/arm/juno-motherboard.dtsi
> create mode 100644 arch/arm64/boot/dts/arm/juno.dts
>

[...]

> diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts
> new file mode 100644
> index 0000000..097ecc4
> --- /dev/null
> +++ b/arch/arm64/boot/dts/arm/juno.dts

[...]

> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_EDGE_RISING)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_EDGE_RISING)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_EDGE_RISING)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_EDGE_RISING)>;
> + };

Sorry, I should have spotted this earlier: all these interrupts are
*level*, not edge. This happens to work because the GIC's config
register is RO for PPIs on Juno, but still...

Thanks,

M.
--
Jazz is not dead. It just smells funny...


\
 
 \ /
  Last update: 2014-11-26 12:01    [W:0.237 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site