lkml.org 
[lkml]   [2014]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v6] ath3k: Add support of MCI 13d3:3408 bt device
From
Date
Hi Dmitry,

> Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
> This bluetooth module requires loading patch and sysconfig by ath3k driver.
>
> T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=13d3 ProdID=3408 Rev= 0.02
> C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
> I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
> I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
> I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
> I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
> I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
> E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
>
>
> CC: stable@vger.kernel.org
> Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>

so you really need to make sure to send only one version. I now have two patches labeled as v6 and I have no idea which one is recent and which one I am suppose to apply.

I tried applying this one, but it failed. Patches need to be based against bluetooth-next tree.

Applying: ath3k: Add support of MCI 13d3:3408 bt device
error: patch failed: drivers/bluetooth/ath3k.c:105
error: drivers/bluetooth/ath3k.c: patch does not apply
error: patch failed: drivers/bluetooth/btusb.c:182
error: drivers/bluetooth/btusb.c: patch does not apply
Patch failed at 0001 ath3k: Add support of MCI 13d3:3408 bt device

Regards

Marcel



\
 
 \ /
  Last update: 2014-11-26 06:41    [W:0.350 / U:2.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site