lkml.org 
[lkml]   [2014]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] ARM: tegra: colibri t30: fix on-module ethernet
From
Date
On Fri, 2014-11-21 at 11:41 +0100, Marcel Ziswiler wrote:
> Looks like Ethernet only ever worked if U-Boot properly brought it up
> as both the reset as well as the VBUS lines were not actively handled
> in-kernel.
> This patch fixes this by just pulling up the reset GPIO

Doing automatic power-cycle tests revealed that this is still not enough
and a proper reset-cycle might be required. However I don't know as of
yet how one can easily do that in mainline with a USB device otherwise
not mentioned anywhere in the device tree. Any ideas?

> and properly
> enabling VBUS via a GPIO enabled fixed regulator VBUS supply.
>
> Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>



\
 
 \ /
  Last update: 2014-11-21 13:21    [W:0.030 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site