lkml.org 
[lkml]   [2014]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v2] virtio_blk: fix defaults for max_hw_sectors and max_segment_size
virtio_blk incorrectly established -1U as the default for these
queue_limits. Set these limits to sane default values to avoid crashing
the kernel. But the virtio-blk protocol should probably be extended to
allow proper stacking of the disk's limits from the host.

This change fixes a crash that can occur if the max_sectors_kb is
modified to even be half of virtio_blk's advertised max_hw_sectors_kb:

# cat /sys/block/vdb/queue/max_sectors_kb
512
# cat /sys/block/vdb/queue/max_hw_sectors_kb
2147483647
# echo 1073741824 > /sys/block/vdb/queue/max_sectors_kb

Attempting to mkfs.xfs against /dev/vdb will result in hitting
fs/direct-io.c:dio_send_cur_page()'s BUG_ON.

While fixing the blk_queue_max_hw_sectors(q, -1U) call it was
immediately apparent that the blk_queue_max_segment_size(q, -1U) also
should be fixed.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
---
drivers/block/virtio_blk.c | 9 ++++++---
1 files changed, 6 insertions(+), 3 deletions(-)

v2: revise header to simplify the scope of the problem explanation

diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index c6a27d5..68efbdc 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -674,8 +674,11 @@ static int virtblk_probe(struct virtio_device *vdev)
/* No need to bounce any requests */
blk_queue_bounce_limit(q, BLK_BOUNCE_ANY);

- /* No real sector limit. */
- blk_queue_max_hw_sectors(q, -1U);
+ /*
+ * Limited by disk's max_hw_sectors in host, but
+ * without that info establish a sane default.
+ */
+ blk_queue_max_hw_sectors(q, BLK_DEF_MAX_SECTORS);

/* Host can optionally specify maximum segment size and number of
* segments. */
@@ -684,7 +687,7 @@ static int virtblk_probe(struct virtio_device *vdev)
if (!err)
blk_queue_max_segment_size(q, v);
else
- blk_queue_max_segment_size(q, -1U);
+ blk_queue_max_segment_size(q, BLK_MAX_SEGMENT_SIZE);

/* Host can optionally specify the block size of the device */
err = virtio_cread_feature(vdev, VIRTIO_BLK_F_BLK_SIZE,
--
1.7.4.4


\
 
 \ /
  Last update: 2014-11-21 03:41    [W:1.213 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site