lkml.org 
[lkml]   [2014]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] gpio_wdt: Add "always_running" feature to GPIO watchdog
On Thu, Nov 20, 2014 at 02:16:17PM +0100, Mike Looijmans wrote:
> On some chips, like the TPS386000, the trigger cannot be disabled
> and the CPU must keep toggling the line at all times. Add a switch
> "always_running" to keep toggling the GPIO line regardless of the
> state of the soft part of the watchdog. The "armed" member keeps
> track of whether a timeout must also cause a reset.
>
> Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
> ---
> drivers/watchdog/gpio_wdt.c | 20 +++++++++++++++++---
> 1 file changed, 17 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/watchdog/gpio_wdt.c b/drivers/watchdog/gpio_wdt.c
> index 220a9e0..921ee67 100644
> --- a/drivers/watchdog/gpio_wdt.c
> +++ b/drivers/watchdog/gpio_wdt.c
> @@ -31,6 +31,8 @@ struct gpio_wdt_priv {
> int gpio;
> bool active_low;
> bool state;
> + bool always_running;
> + bool armed;
> unsigned int hw_algo;
> unsigned int hw_margin;
> unsigned long last_jiffies;
> @@ -56,6 +58,7 @@ static int gpio_wdt_start(struct watchdog_device *wdd)
> gpio_direction_output(priv->gpio, priv->state);
> priv->last_jiffies = jiffies;
> mod_timer(&priv->timer, priv->last_jiffies + priv->hw_margin);
> + priv->armed = true;
>
> return 0;
> }
> @@ -64,8 +67,11 @@ static int gpio_wdt_stop(struct watchdog_device *wdd)
> {
> struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd);
>
> - mod_timer(&priv->timer, 0);
> - gpio_wdt_disable(priv);
> + priv->armed = false;
> + if (!priv->always_running) {
> + mod_timer(&priv->timer, 0);
> + gpio_wdt_disable(priv);
> + }
>
> return 0;
> }
> @@ -91,7 +97,7 @@ static void gpio_wdt_hwping(unsigned long data)
> struct watchdog_device *wdd = (struct watchdog_device *)data;
> struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd);
>
> - if (time_after(jiffies, priv->last_jiffies +
> + if (priv->armed && time_after(jiffies, priv->last_jiffies +
> msecs_to_jiffies(wdd->timeout * 1000))) {
> dev_crit(wdd->dev, "Timer expired. System will reboot soon!\n");
> return;
> @@ -197,6 +203,9 @@ static int gpio_wdt_probe(struct platform_device *pdev)
> /* Use safe value (1/2 of real timeout) */
> priv->hw_margin = msecs_to_jiffies(hw_margin / 2);
>
> + priv->always_running = of_property_read_bool(pdev->dev.of_node,
> + "always_running");

That will need to be documented in a devicetree bindings document, and be
reviewed by the fdt maintainers. I may be wrong, but I think devicetree
properties commonly use '-', not '_'.

Guenter

> +
> watchdog_set_drvdata(&priv->wdd, priv);
>
> priv->wdd.info = &gpio_wdt_ident;
> @@ -218,6 +227,11 @@ static int gpio_wdt_probe(struct platform_device *pdev)
> if (ret)
> watchdog_unregister_device(&priv->wdd);
>
> + if (priv->always_running) {
> + gpio_wdt_start(&priv->wdd);
> + priv->armed = false;
> + }
> +
> return ret;
> }
>
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html


\
 
 \ /
  Last update: 2014-11-20 19:01    [W:0.095 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site