lkml.org 
[lkml]   [2014]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] KVM: ia64: remove


On 20/11/2014 02:16, Chen, Tiejun wrote:
> On 2014/11/20 5:05, Paolo Bonzini wrote:
>> KVM for ia64 has been marked as broken not just once, but twice even,
>> and the last patch from the maintainer is now roughly 5 years old.
>> Time for it to rest in piece.
>>
>> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
>> ---
>
> I think we also need to sync this in Documentation:
>
> Documentation: virtual: kvm: remove ia64
>
> kvm/ia64 would be gone so just clean Documentation.
>
> Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
> ---
> Documentation/ia64/kvm.txt | 83
> -------------------------------------
> Documentation/ia64/paravirt_ops.txt | 8 ++--
> Documentation/virtual/kvm/api.txt | 45 ++++++++++----------
> 3 files changed, 26 insertions(+), 110 deletions(-)
> delete mode 100644 Documentation/ia64/kvm.txt
>
> diff --git a/Documentation/ia64/kvm.txt b/Documentation/ia64/kvm.txt
> deleted file mode 100644
> index ffb5c80..0000000
> --- a/Documentation/ia64/kvm.txt
> +++ /dev/null
> @@ -1,83 +0,0 @@
> -Currently, kvm module is in EXPERIMENTAL stage on IA64. This means that
> -interfaces are not stable enough to use. So, please don't run critical
> -applications in virtual machine.
> -We will try our best to improve it in future versions!
> -
> - Guide: How to boot up guests on kvm/ia64
> -
> -This guide is to describe how to enable kvm support for IA-64 systems.
> -
> -1. Get the kvm source from git.kernel.org.
> - Userspace source:
> - git clone
> git://git.kernel.org/pub/scm/virt/kvm/kvm-userspace.git
> - Kernel Source:
> - git clone
> git://git.kernel.org/pub/scm/linux/kernel/git/xiantao/kvm-ia64.git
> -
> -2. Compile the source code.
> - 2.1 Compile userspace code:
> - (1)cd ./kvm-userspace
> - (2)./configure
> - (3)cd kernel
> - (4)make sync LINUX= $kernel_dir (kernel_dir is the
> directory of kernel source.)
> - (5)cd ..
> - (6)make qemu
> - (7)cd qemu; make install
> -
> - 2.2 Compile kernel source code:
> - (1) cd ./$kernel_dir
> - (2) Make menuconfig
> - (3) Enter into virtualization option, and choose kvm.
> - (4) make
> - (5) Once (4) done, make modules_install
> - (6) Make initrd, and use new kernel to reboot up host
> machine.
> - (7) Once (6) done, cd $kernel_dir/arch/ia64/kvm
> - (8) insmod kvm.ko; insmod kvm-intel.ko
> -
> -Note: For step 2, please make sure that host page size ==
> TARGET_PAGE_SIZE of qemu, otherwise, may fail.
> -
> -3. Get Guest Firmware named as Flash.fd, and put it under right place:
> - (1) If you have the guest firmware (binary) released by Intel
> Corp for Xen, use it directly.
> -
> - (2) If you have no firmware at hand, Please download its source
> from
> - hg clone http://xenbits.xensource.com/ext/efi-vfirmware.hg
> - you can get the firmware's binary in the directory of
> efi-vfirmware.hg/binaries.
> -
> - (3) Rename the firmware you owned to Flash.fd, and copy it to
> /usr/local/share/qemu
> -
> -4. Boot up Linux or Windows guests:
> - 4.1 Create or install a image for guest boot. If you have xen
> experience, it should be easy.
> -
> - 4.2 Boot up guests use the following command.
> - /usr/local/bin/qemu-system-ia64 -smp xx -m 512 -hda
> $your_image
> - (xx is the number of virtual processors for the guest,
> now the maximum value is 4)
> -
> -5. Known possible issue on some platforms with old Firmware.
> -
> -In the event of strange host crash issues, try to solve it through
> either of the following ways:
> -
> -(1): Upgrade your Firmware to the latest one.
> -
> -(2): Applying the below patch to kernel source.
> -diff --git a/arch/ia64/kernel/pal.S b/arch/ia64/kernel/pal.S
> -index 0b53344..f02b0f7 100644
> ---- a/arch/ia64/kernel/pal.S
> -+++ b/arch/ia64/kernel/pal.S
> -@@ -84,7 +84,8 @@ GLOBAL_ENTRY(ia64_pal_call_static)
> - mov ar.pfs = loc1
> - mov rp = loc0
> - ;;
> -- srlz.d // serialize restoration of psr.l
> -+ srlz.i // serialize restoration of psr.l
> -+ ;;
> - br.ret.sptk.many b0
> - END(ia64_pal_call_static)
> -
> -6. Bug report:
> - If you found any issues when use kvm/ia64, Please post the bug
> info to kvm-ia64-devel mailing list.
> - https://lists.sourceforge.net/lists/listinfo/kvm-ia64-devel/
> -
> -Thanks for your interest! Let's work together, and make kvm/ia64
> stronger and stronger!
> -
> -
> - Xiantao
> Zhang <xiantao.zhang@intel.com>
> - 2008.3.10
> diff --git a/Documentation/ia64/paravirt_ops.txt
> b/Documentation/ia64/paravirt_ops.txt
> index 39ded02..3a1f36b 100644
> --- a/Documentation/ia64/paravirt_ops.txt
> +++ b/Documentation/ia64/paravirt_ops.txt
> @@ -12,7 +12,7 @@ paravirt_ops (pv_ops in short) is a way for
> virtualization support of
> Linux kernel on x86. Several ways for virtualization support were
> proposed, paravirt_ops is the winner.
> On the other hand, now there are also several IA64 virtualization
> -technologies like kvm/IA64, xen/IA64 and many other academic IA64
> +technologies like xen/IA64 and many other academic IA64
> hypervisors so that it is good to add generic virtualization
> infrastructure on Linux/IA64.
>
> @@ -69,9 +69,9 @@ But paravirt_ops approach was taken because
> and the overhead of paravirt_ops on native environment should be as
> small as possible.
>
> -- for full virtualization technology, e.g. KVM/IA64 or
> - Xen/IA64 HVM domain, the result would be
> - (the emulated platform machine vector. probably dig) + (pv_ops).
> +- for full virtualization technology, e.g. Xen/IA64 HVM domain, the
> + result would be (the emulated platform machine vector. probably
> + dig) + (pv_ops).
> This means that the virtualization support layer should be under
> the machine vector layer.
>
> diff --git a/Documentation/virtual/kvm/api.txt
> b/Documentation/virtual/kvm/api.txt
> index 7a943c2..80bfe59 100644
> --- a/Documentation/virtual/kvm/api.txt
> +++ b/Documentation/virtual/kvm/api.txt
> @@ -607,7 +607,7 @@ struct kvm_fpu {
> 4.24 KVM_CREATE_IRQCHIP
>
> Capability: KVM_CAP_IRQCHIP, KVM_CAP_S390_IRQCHIP (s390)
> -Architectures: x86, ia64, ARM, arm64, s390
> +Architectures: x86, ARM, arm64, s390
> Type: vm ioctl
> Parameters: none
> Returns: 0 on success, -1 on error
> @@ -615,7 +615,7 @@ Returns: 0 on success, -1 on error
> Creates an interrupt controller model in the kernel. On x86, creates a
> virtual
> ioapic, a virtual PIC (two PICs, nested), and sets up future vcpus to
> have a
> local APIC. IRQ routing for GSIs 0-15 is set to both PIC and IOAPIC;
> GSI 16-23
> -only go to the IOAPIC. On ia64, a IOSAPIC is created. On ARM/arm64, a
> GIC is
> +only go to the IOAPIC. On ARM/arm64, a GIC is
> created. On s390, a dummy irq routing table is created.
>
> Note that on s390 the KVM_CAP_S390_IRQCHIP vm capability needs to be
> enabled
> @@ -625,7 +625,7 @@ before KVM_CREATE_IRQCHIP can be used.
> 4.25 KVM_IRQ_LINE
>
> Capability: KVM_CAP_IRQCHIP
> -Architectures: x86, ia64, arm, arm64
> +Architectures: x86, arm, arm64
> Type: vm ioctl
> Parameters: struct kvm_irq_level
> Returns: 0 on success, -1 on error
> @@ -679,7 +679,7 @@ struct kvm_irq_level {
> 4.26 KVM_GET_IRQCHIP
>
> Capability: KVM_CAP_IRQCHIP
> -Architectures: x86, ia64
> +Architectures: x86
> Type: vm ioctl
> Parameters: struct kvm_irqchip (in/out)
> Returns: 0 on success, -1 on error
> @@ -701,7 +701,7 @@ struct kvm_irqchip {
> 4.27 KVM_SET_IRQCHIP
>
> Capability: KVM_CAP_IRQCHIP
> -Architectures: x86, ia64
> +Architectures: x86
> Type: vm ioctl
> Parameters: struct kvm_irqchip (in)
> Returns: 0 on success, -1 on error
> @@ -994,7 +994,7 @@ for vm-wide capabilities.
> 4.38 KVM_GET_MP_STATE
>
> Capability: KVM_CAP_MP_STATE
> -Architectures: x86, ia64, s390
> +Architectures: x86, s390
> Type: vcpu ioctl
> Parameters: struct kvm_mp_state (out)
> Returns: 0 on success; -1 on error
> @@ -1008,16 +1008,15 @@ uniprocessor guests).
>
> Possible values are:
>
> - - KVM_MP_STATE_RUNNABLE: the vcpu is currently running [x86, ia64]
> + - KVM_MP_STATE_RUNNABLE: the vcpu is currently running [x86]
> - KVM_MP_STATE_UNINITIALIZED: the vcpu is an application processor (AP)
> - which has not yet received an INIT
> signal [x86,
> - ia64]
> + which has not yet received an INIT
> signal [x86]
> - KVM_MP_STATE_INIT_RECEIVED: the vcpu has received an INIT signal,
> and is
> - now ready for a SIPI [x86, ia64]
> + now ready for a SIPI [x86]
> - KVM_MP_STATE_HALTED: the vcpu has executed a HLT
> instruction and
> - is waiting for an interrupt [x86, ia64]
> + is waiting for an interrupt [x86]
> - KVM_MP_STATE_SIPI_RECEIVED: the vcpu has just received a SIPI (vector
> - accessible via KVM_GET_VCPU_EVENTS)
> [x86, ia64]
> + accessible via KVM_GET_VCPU_EVENTS) [x86]
> - KVM_MP_STATE_STOPPED: the vcpu is stopped [s390]
> - KVM_MP_STATE_CHECK_STOP: the vcpu is in a special error state
> [s390]
> - KVM_MP_STATE_OPERATING: the vcpu is operating (running or halted)
> @@ -1025,7 +1024,7 @@ Possible values are:
> - KVM_MP_STATE_LOAD: the vcpu is in a special load/startup
> state
> [s390]
>
> -On x86 and ia64, this ioctl is only useful after KVM_CREATE_IRQCHIP.
> Without an
> +On x86, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an
> in-kernel irqchip, the multiprocessing state must be maintained by
> userspace on
> these architectures.
>
> @@ -1033,7 +1032,7 @@ these architectures.
> 4.39 KVM_SET_MP_STATE
>
> Capability: KVM_CAP_MP_STATE
> -Architectures: x86, ia64, s390
> +Architectures: x86, s390
> Type: vcpu ioctl
> Parameters: struct kvm_mp_state (in)
> Returns: 0 on success; -1 on error
> @@ -1041,7 +1040,7 @@ Returns: 0 on success; -1 on error
> Sets the vcpu's current "multiprocessing state"; see KVM_GET_MP_STATE for
> arguments.
>
> -On x86 and ia64, this ioctl is only useful after KVM_CREATE_IRQCHIP.
> Without an
> +On x86, this ioctl is only useful after KVM_CREATE_IRQCHIP. Without an
> in-kernel irqchip, the multiprocessing state must be maintained by
> userspace on
> these architectures.
>
> @@ -1068,7 +1067,7 @@ documentation when it pops into existence).
> 4.41 KVM_SET_BOOT_CPU_ID
>
> Capability: KVM_CAP_SET_BOOT_CPU_ID
> -Architectures: x86, ia64
> +Architectures: x86
> Type: vm ioctl
> Parameters: unsigned long vcpu_id
> Returns: 0 on success, -1 on error
> @@ -1261,7 +1260,7 @@ The flags bitmap is defined as:
> 4.48 KVM_ASSIGN_PCI_DEVICE
>
> Capability: none
> -Architectures: x86 ia64
> +Architectures: x86
> Type: vm ioctl
> Parameters: struct kvm_assigned_pci_dev (in)
> Returns: 0 on success, -1 on error
> @@ -1311,7 +1310,7 @@ Errors:
> 4.49 KVM_DEASSIGN_PCI_DEVICE
>
> Capability: none
> -Architectures: x86 ia64
> +Architectures: x86
> Type: vm ioctl
> Parameters: struct kvm_assigned_pci_dev (in)
> Returns: 0 on success, -1 on error
> @@ -1330,7 +1329,7 @@ Errors:
> 4.50 KVM_ASSIGN_DEV_IRQ
>
> Capability: KVM_CAP_ASSIGN_DEV_IRQ
> -Architectures: x86 ia64
> +Architectures: x86
> Type: vm ioctl
> Parameters: struct kvm_assigned_irq (in)
> Returns: 0 on success, -1 on error
> @@ -1370,7 +1369,7 @@ Errors:
> 4.51 KVM_DEASSIGN_DEV_IRQ
>
> Capability: KVM_CAP_ASSIGN_DEV_IRQ
> -Architectures: x86 ia64
> +Architectures: x86
> Type: vm ioctl
> Parameters: struct kvm_assigned_irq (in)
> Returns: 0 on success, -1 on error
> @@ -1385,7 +1384,7 @@ KVM_ASSIGN_DEV_IRQ. Partial deassignment of host
> or guest IRQ is allowed.
> 4.52 KVM_SET_GSI_ROUTING
>
> Capability: KVM_CAP_IRQ_ROUTING
> -Architectures: x86 ia64 s390
> +Architectures: x86 s390
> Type: vm ioctl
> Parameters: struct kvm_irq_routing (in)
> Returns: 0 on success, -1 on error
> @@ -1444,7 +1443,7 @@ struct kvm_irq_routing_s390_adapter {
> 4.53 KVM_ASSIGN_SET_MSIX_NR
>
> Capability: none
> -Architectures: x86 ia64
> +Architectures: x86
> Type: vm ioctl
> Parameters: struct kvm_assigned_msix_nr (in)
> Returns: 0 on success, -1 on error
> @@ -1466,7 +1465,7 @@ struct kvm_assigned_msix_nr {
> 4.54 KVM_ASSIGN_SET_MSIX_ENTRY
>
> Capability: none
> -Architectures: x86 ia64
> +Architectures: x86
> Type: vm ioctl
> Parameters: struct kvm_assigned_msix_entry (in)
> Returns: 0 on success, -1 on error

Right, thanks!

Paolo


\
 
 \ /
  Last update: 2014-11-20 08:01    [W:0.066 / U:1.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site