lkml.org 
[lkml]   [2014]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] rtc: da9063: Fix ALARM interrupt registration.
Date

> On 20Nov, 2014, at 12:23, Opensource [Steve Twiss] <stwiss.opensource@diasemi.com> wrote:
>
> On 20 November 2014 09:55 Dmitry Lavnikevich wrote:
>
>> Call platform_get_irq_byname() returns local IRQ number. Use
>> regmap_irq_get_virq() to get VIRQ instead.
>> This fixes rtc initialization error:
>> da9063-rtc da9063-rtc: Failed to request ALARM IRQ 1: -22
>>
>> Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
>
> Hi Dmitry,
>
> Please refer to the previous patch :
> http://patchwork.ozlabs.org/patch/329051/

Yes, I’ve seen this patch for da9055.
I have no hardware with da9055 to test it but as I understood from
da9055-core.c sources the difference is in regmap_add_irq_chip()
call. Looks like passing irq_base = -1 to it dynamically allocates
irq_base so call regmap_irq_chip_get_base() then returns base for
virtual IRQ.

In case of da9063 there is no use of
regmap_add_irq_chip/regmap_irq_chip_get_base and because of that
da9063-core registeres IRQ using irq_base=0 and therefore is local
instead of virtual.

>> ---
>> drivers/rtc/rtc-da9063.c | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/drivers/rtc/rtc-da9063.c b/drivers/rtc/rtc-da9063.c
>> index 731ed1a..04743a6 100644
>> --- a/drivers/rtc/rtc-da9063.c
>> +++ b/drivers/rtc/rtc-da9063.c
>> @@ -315,6 +315,7 @@ static int da9063_rtc_probe(struct platform_device
>> *pdev)
>> platform_set_drvdata(pdev, rtc);
>>
>> irq_alarm = platform_get_irq_byname(pdev, "ALARM");
>> + irq_alarm = regmap_irq_get_virq(da9063->regmap_irq, irq_alarm);
>> ret = devm_request_threaded_irq(&pdev->dev, irq_alarm, NULL,
>> da9063_alarm_event,
>> IRQF_TRIGGER_LOW |
>> IRQF_ONESHOT,
>> --
>> 2.1.3
>
> This patch above gives the following error when running on the DA9063:
>
> da9063-rtc da9063-rtc: Failed to request ALARM IRQ -22: -22
> da9063-rtc: probe of da9063-rtc failed with error -22

I have tested this patch on pfla02 board and it was ok. On which
board this fail occured?

\
 
 \ /
  Last update: 2014-11-20 14:41    [W:2.046 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site