Messages in this thread | | | Date | Mon, 17 Nov 2014 13:54:45 +0800 | From | Peter Chen <> | Subject | Re: [PATCH v7 09/13] Documentation: bindings: add doc for the USB2 ChipIdea USB driver |
| |
On Fri, Nov 14, 2014 at 04:25:59PM +0100, Antoine Tenart wrote: > Document the USB2 ChipIdea driver (ci13xxx) bindings. > > Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> > --- > .../devicetree/bindings/usb/ci-hdrc-usb2.txt | 24 ++++++++++++++++++++++ > 1 file changed, 24 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt > > diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt > new file mode 100644 > index 000000000000..27f8b1e5ee46 > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt > @@ -0,0 +1,24 @@ > +* USB2 ChipIdea USB controller for ci13xxx > + > +Required properties: > +- compatible: should be "chipidea,usb2" > +- reg: base address and length of the registers > +- interrupts: interrupt for the USB controller > + > +Optional properties: > +- clocks: reference to the USB clock > +- phys: reference to the USB PHY > +- phy-names: should be "usb-phy" > +- vbus-supply: reference to the VBUS regulator > + > +Example: > + > + usb@f7ed0000 { > + compatible = "chipidea,usb2"; > + reg = <0xf7ed0000 0x10000>; > + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&chip CLKID_USB0>; > + phys = <&usb_phy0>; > + phy-names = "usb-phy"; > + vbus-supply = <®_usb0_vbus>; > + }; > -- > 2.1.0 >
Acked-by: Peter Chen <peter.chen@freescale.com>
--
Best Regards, Peter Chen
| |