lkml.org 
[lkml]   [2014]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V2] usb:host:xhci-plat: 64-bit dma addressing support
From
Just want to ping this again to see if there is any comments, thanks.

On Tue, Nov 4, 2014 at 11:06 AM, Feng Kan <fkan@apm.com> wrote:
> Use dma_addr_t to support 64-bit plaforms, which access beyond the default
> 32 bit address range.
>
> Signed-off-by: Bao Truong <btruong@apm.com>
> Signed-off-by: Feng Kan <fkan@apm.com>
> ---
> Changes:
> V2: fixed GKH's comment regarding not mark up the comment after
> code change.
>
> drivers/usb/host/xhci-plat.c | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index 3d78b0c..f75764f 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -96,14 +96,18 @@ static int xhci_plat_probe(struct platform_device *pdev)
> return ret;
> }
>
> - /* Initialize dma_mask and coherent_dma_mask to 32-bits */
> - ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
> + /*
> + * Initialize dma_mask and coherent_dma_mask to valid DMA or bus
> + * address for the platform.
> + */
> + ret = dma_set_coherent_mask(&pdev->dev,
> + DMA_BIT_MASK(sizeof(dma_addr_t)*8));
> if (ret)
> return ret;
> if (!pdev->dev.dma_mask)
> pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
> else
> - dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
> + dma_set_mask(&pdev->dev, DMA_BIT_MASK(sizeof(dma_addr_t)*8));
>
> hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
> if (!hcd)
> --
> 1.9.1
>


\
 
 \ /
  Last update: 2014-11-14 02:01    [W:0.059 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site