lkml.org 
[lkml]   [2014]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 2/2] dt-bindings: clk: add document for assigned-clock-force-rates usage
Date
This patch adds document for how to use the opetion property
assigned-clock-force-rates.

We may use this property to force update a clock setting.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
---

Documentation/devicetree/bindings/clock/clock-bindings.txt | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
index 06fc6d5..fb5d3a5 100644
--- a/Documentation/devicetree/bindings/clock/clock-bindings.txt
+++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -154,11 +154,14 @@ set to 0, or can be omitted if it is not followed by any non-zero entry.

assigned-clocks = <&clkcon 0>, <&pll 2>;
assigned-clock-parents = <&pll 2>;
+ assigned-clock-force-rates = <500000>, <0>;
assigned-clock-rates = <0>, <460800>;
};

-In this example the <&pll 2> clock is set as parent of clock <&clkcon 0> and
-the <&pll 2> clock is assigned a frequency value of 460800 Hz.
+In this example the <&pll 2> clock is set as parent of clock <&clkcon 0>,
+the <&clkcon 0> clock is assigned a frequency value of 500000 Hz and make
+sure the we get into assigned-clock-rates even if there is no rate change,
+and the <&pll 2> clock is assigned a frequency value of 460800 Hz.

Configuring a clock's parent and rate through the device node that consumes
the clock can be done only for clocks that have a single user. Specifying
--
1.9.1


\
 
 \ /
  Last update: 2014-11-13 15:01    [W:0.114 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site