Messages in this thread | | | Date | Wed, 12 Nov 2014 18:56:22 +0800 | From | Shawn Guo <> | Subject | Re: [PATCH v4 0/3] add power off driver for i.mx6 |
| |
On Wed, Nov 12, 2014 at 04:20:36PM +0800, Robin Gong wrote: > Resend the patchset with the latest MAINTAINERS > Add simple power off driver for i.mx6, including: > - add basic imx-snvs-poweroff driver in drivers/power/reset > - add device node in all dts files of i.mx6. > - enable in config file > > Change from v3: > - disable poweroff driver in soc level dts and enable it in board level dts > - replace 'EIO' with 'ENODEV' while of_iomap fail. > Change from v2: > - remove useless included head files > - split device binding doc from dts patch > - add description for the case that PMIC_ON_REQ not used as external power > control > > Robin Gong (3): > ARM: dts: imx6: add pm_power_off support for i.mx6 chips > power: reset: imx-snvs-poweroff: add power off driver for i.mx6 > ARM: configs: imx_v6_v7_defconfig: add power off driver
I'm fine with the series. But before I take the patches, I need an ACK from DT folks on the bindings.
Shawn
| |