lkml.org 
[lkml]   [2014]   [Nov]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH 4/4] arm64, acpi, pci: Provide arch-specific calls for PCI host bridge dirver (PNP0A03).
W dniu 07.11.2014 o 15:55, Liviu Dudau pisze:
> On Fri, Nov 07, 2014 at 01:27:56PM +0000, Tomasz Nowicki wrote:
>> Code inspired by arch/x86/pci/acpi.c and arch/ia64/pci/pci.c files.
>> The main reasons why we need this:
>> - parse and manage resources (BUS, IO and MEM)
>> - create pci root bus and enumerate its children
>> - provide PCI config space accessors (via MMCONFIG)
>
> Hi Tomasz,
>
> I have some comments to your code:
>
>>
>> Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
>> ---
>> arch/arm64/include/asm/pci.h | 8 +
>> arch/arm64/kernel/pci.c | 401 +++++++++++++++++++++++++++++++++++++++++--
>> 2 files changed, 391 insertions(+), 18 deletions(-)
>>
>> diff --git a/arch/arm64/include/asm/pci.h b/arch/arm64/include/asm/pci.h
>> index fded096..ecd940f 100644
>> --- a/arch/arm64/include/asm/pci.h
>> +++ b/arch/arm64/include/asm/pci.h
>> @@ -33,6 +33,14 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
>> extern int isa_dma_bridge_buggy;
>>
>> #ifdef CONFIG_PCI
>> +struct pci_controller {
>> + struct acpi_device *companion;
>> + int segment;
>> + int node; /* nearest node with memory or NUMA_NO_NODE for global allocation */
>> +};
>> +
>> +#define PCI_CONTROLLER(busdev) ((struct pci_controller *) busdev->sysdata)
>
> I am trying to move away from the model where the architecture dictates the shape
> of the pci_controller structure. Can I suggest that you put all this code and the
> one under #ifdef CONFIG_ACPI in a separate file, say arch/arm64/kernel/pci-acpi.c ?
> Or that you add an #ifdef CONFIG_ACPI around this structure definition?
>
> I can't see anyone using this definition outside ACPI (due to struct acpi_device
> dependency) and I would like to avoid it conflicting with other host bridge
> drivers trying to define the same name structure.

That is good point, will do, thanks.

>
>
>> +
>> static inline int pci_proc_domain(struct pci_bus *bus)
>> {
>> return 1;
>> diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
>> index 42fb195..cc34ded 100644
>> --- a/arch/arm64/kernel/pci.c
>> +++ b/arch/arm64/kernel/pci.c
>> @@ -1,6 +1,10 @@
>> /*
>> - * Code borrowed from powerpc/kernel/pci-common.c
>> + * Code borrowed from powerpc/kernel/pci-common.c and arch/ia64/pci/pci.c
>> *
>> + * Copyright (c) 2002, 2005 Hewlett-Packard Development Company, L.P.
>> + * David Mosberger-Tang <davidm@hpl.hp.com>
>> + * Bjorn Helgaas <bjorn.helgaas@hp.com>
>> + * Copyright (C) 2004 Silicon Graphics, Inc.
>> * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM
>> * Copyright (C) 2014 ARM Ltd.
>> *
>> @@ -17,10 +21,16 @@
>> #include <linux/mm.h>
>> #include <linux/of_pci.h>
>> #include <linux/of_platform.h>
>> +#include <linux/of_address.h>
>> #include <linux/slab.h>
>> +#include <linux/pci.h>
>> +#include <linux/acpi.h>
>> +#include <linux/mmconfig.h>
>>
>> #include <asm/pci-bridge.h>
>>
>> +#define PREFIX "PCI: "
>
> Where is this used?

Nowhere here, will remove/improve.

>
>> +
>> /*
>> * Called after each bus is probed, but before its children are examined
>> */
>> @@ -43,7 +53,8 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res,
>> */
>> int pcibios_add_device(struct pci_dev *dev)
>> {
>> - dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
>> + if (acpi_disabled)
>> + dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
>>
>> return 0;
>> }
>> @@ -54,45 +65,399 @@ static bool dt_domain_found = false;
>>
>> void pci_bus_assign_domain_nr(struct pci_bus *bus, struct device *parent)
>> {
>> - int domain = of_get_pci_domain_nr(parent->of_node);
>> + int domain = -1;
>>
>> - if (domain >= 0) {
>> - dt_domain_found = true;
>> - } else if (dt_domain_found == true) {
>> - dev_err(parent, "Node %s is missing \"linux,pci-domain\" property in DT\n",
>> - parent->of_node->full_name);
>> - return;
>> + if (acpi_disabled) {
>> + domain = of_get_pci_domain_nr(parent->of_node);
>> +
>> + if (domain >= 0) {
>> + dt_domain_found = true;
>> + } else if (dt_domain_found == true) {
>> + dev_err(parent, "Node %s is missing \"linux,pci-domain\" property in DT\n",
>> + parent->of_node->full_name);
>> + return;
>> + } else {
>> + domain = pci_get_new_domain_nr();
>> + }
>> } else {
>> - domain = pci_get_new_domain_nr();
>> + /*
>> + * Take the domain nr from associated private data.
>> + * Case where bus has parent is covered in pci_alloc_bus()
>> + */
>> + if (!parent)
>> + domain = PCI_CONTROLLER(bus)->segment;
>
> I would also like to wrap this into an ACPI specific function. Reason for it
> is that when I get to split the pci_host_bridge creation out of pci_create_root_bus()
> this will become a pci_controller property.

Make sense for me.

>
>> }
>>
>> bus->domain_nr = domain;
>> }
>> #endif
>>
>> +static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus,
>> + unsigned int devfn)
>> +{
>> + struct pci_mmcfg_region *cfg = pci_mmconfig_lookup(seg, bus);
>> +
>> + if (cfg && cfg->virt)
>> + return cfg->virt + (PCI_MMCFG_BUS_OFFSET(bus) | (devfn << 12));
>> + return NULL;
>> +}
>> +
>> /*
>> * raw_pci_read/write - Platform-specific PCI config space access.
>> - *
>> - * Default empty implementation. Replace with an architecture-specific setup
>> - * routine, if necessary.
>> */
>> int raw_pci_read(unsigned int domain, unsigned int bus,
>> unsigned int devfn, int reg, int len, u32 *val)
>> {
>> - return -EINVAL;
>> + char __iomem *addr;
>> +
>> + if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095))) {
>> +err: *val = -1;
>
> I believe the general usage is to have labels on their own line.
>
>> + return -EINVAL;
>> + }
>> +
>> + rcu_read_lock();
>> + addr = pci_dev_base(domain, bus, devfn);
>> + if (!addr) {
>> + rcu_read_unlock();
>> + goto err;
>> + }
>> +
>> + switch (len) {
>> + case 1:
>> + *val = readb(addr + reg);
>> + break;
>> + case 2:
>> + *val = readw(addr + reg);
>> + break;
>> + case 4:
>> + *val = readl(addr + reg);
>> + break;
>> + }
>> + rcu_read_unlock();
>> +
>> + return 0;
>> }
>>
>> int raw_pci_write(unsigned int domain, unsigned int bus,
>> unsigned int devfn, int reg, int len, u32 val)
>> {
>> - return -EINVAL;
>> + char __iomem *addr;
>> +
>> + if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095)))
>> + return -EINVAL;
>> +
>> + rcu_read_lock();
>> + addr = pci_dev_base(domain, bus, devfn);
>> + if (!addr) {
>> + rcu_read_unlock();
>> + return -EINVAL;
>> + }
>> +
>> + switch (len) {
>> + case 1:
>> + writeb(val, addr + reg);
>> + break;
>> + case 2:
>> + writew(val, addr + reg);
>> + break;
>> + case 4:
>> + writel(val, addr + reg);
>> + break;
>> + }
>> + rcu_read_unlock();
>> +
>> + return 0;
>> }
>>
>
> These raw_pci_{read,write} functions are all ACPI specific so they can move
> into the new file as well.

Got it!

>
>
>> #ifdef CONFIG_ACPI
>> +static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
>> + int size, u32 *value)
>> +{
>> + return raw_pci_read(pci_domain_nr(bus), bus->number,
>> + devfn, where, size, value);
>> +}
>> +
>> +static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
>> + int size, u32 value)
>> +{
>> + return raw_pci_write(pci_domain_nr(bus), bus->number,
>> + devfn, where, size, value);
>> +}
>> +
>> +struct pci_ops pci_root_ops = {
>> + .read = pci_read,
>> + .write = pci_write,
>> +};
>> +
>> +static struct pci_controller *alloc_pci_controller(int seg)
>> +{
>> + struct pci_controller *controller;
>> +
>> + controller = kzalloc(sizeof(*controller), GFP_KERNEL);
>> + if (!controller)
>> + return NULL;
>> +
>> + controller->segment = seg;
>> + return controller;
>> +}
>> +
>> +struct pci_root_info {
>> + struct acpi_device *bridge;
>> + struct pci_controller *controller;
>> + struct list_head resources;
>> + struct resource *res;
>> + resource_size_t *res_offset;
>
> Why do you need to keep an array of res_offsets here? You only seem
> to be using the values once when you add the resource to the host
> bridge windows.

This is what I noticed too but did not improve that at the end. Let me
fix that in the next ver.

>
>> + unsigned int res_num;
>> + char *name;
>> +};
>> +
>> +static acpi_status resource_to_window(struct acpi_resource *resource,
>> + struct acpi_resource_address64 *addr)
>> +{
>> + acpi_status status;
>> +
>> + /*
>> + * We're only interested in _CRS descriptors that are
>> + * - address space descriptors for memory
>> + * - non-zero size
>> + * - producers, i.e., the address space is routed downstream,
>> + * not consumed by the bridge itself
>> + */
>> + status = acpi_resource_to_address64(resource, addr);
>> + if (ACPI_SUCCESS(status) &&
>> + (addr->resource_type == ACPI_MEMORY_RANGE ||
>> + addr->resource_type == ACPI_IO_RANGE) &&
>> + addr->address_length &&
>> + addr->producer_consumer == ACPI_PRODUCER)
>> + return AE_OK;
>> +
>> + return AE_ERROR;
>> +}
>> +
>> +static acpi_status count_window(struct acpi_resource *resource, void *data)
>> +{
>> + unsigned int *windows = (unsigned int *) data;
>> + struct acpi_resource_address64 addr;
>> + acpi_status status;
>> +
>> + status = resource_to_window(resource, &addr);
>> + if (ACPI_SUCCESS(status))
>> + (*windows)++;
>> +
>> + return AE_OK;
>> +}
>> +
>> +static acpi_status add_window(struct acpi_resource *res, void *data)
>> +{
>> + struct pci_root_info *info = data;
>> + struct resource *resource;
>> + struct acpi_resource_address64 addr;
>> + acpi_status status;
>> + unsigned long flags;
>> + struct resource *root;
>> + u64 start;
>> +
>> + /* Return AE_OK for non-window resources to keep scanning for more */
>> + status = resource_to_window(res, &addr);
>> + if (!ACPI_SUCCESS(status))
>> + return AE_OK;
>> +
>> + if (addr.resource_type == ACPI_MEMORY_RANGE) {
>> + flags = IORESOURCE_MEM;
>> + root = &iomem_resource;
>> + } else if (addr.resource_type == ACPI_IO_RANGE) {
>> + flags = IORESOURCE_IO;
>> + root = &ioport_resource;
>> + } else
>> + return AE_OK;
>> +
>> + start = addr.minimum + addr.translation_offset;
>> +
>> + resource = &info->res[info->res_num];
>> + resource->name = info->name;
>> + resource->flags = flags;
>> + resource->start = start;
>> + resource->end = resource->start + addr.address_length - 1;
>> +
>> + if (flags & IORESOURCE_IO) {
>> + unsigned long port;
>> + int err;
>> +
>> + err = pci_register_io_range(start, addr.address_length);
>> + if (err)
>> + return AE_OK;
>> +
>> + port = pci_address_to_pio(start);
>> + if (port == (unsigned long)-1)
>> + return AE_OK;
>> +
>> + resource->start = port;
>> + resource->end = port + addr.address_length - 1;
>> +
>> + if (pci_remap_iospace(resource, start) < 0)
>> + return AE_OK;
>
> You seem to leave around invalid resources every time you return in this code
> path due to your choice of ignoring error conditions.
>
> I think there are a few things that can be streamlined in this patch, but
> overall I think it looks promising.
>

Thanks Liviu!

Tomasz


\
 
 \ /
  Last update: 2014-11-12 10:21    [W:0.138 / U:1.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site