Messages in this thread | | | Date | Wed, 12 Nov 2014 00:23:07 +0100 | From | Sebastian Hesselbarth <> | Subject | Re: [PATCH v3 4/5] ARM: berlin: Add AHCI and SATA PHY nodes to BG2 |
| |
On 30.10.2014 11:21, Sebastian Hesselbarth wrote: > Add DT nodes for the AHCI controller and SATA PHY found on Marvell > Berlin2 SoCs. > > Acked-by: Antoine Ténart <antoine.tenart@free-electrons.com> > Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Applied both DT patches to berlin/dt.
Sebastian
> --- > arch/arm/boot/dts/berlin2.dtsi | 39 +++++++++++++++++++++++++++++++++++++++ > 1 file changed, 39 insertions(+) > > diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi > index 9d7c810ebd0b..f39090491eb2 100644 > --- a/arch/arm/boot/dts/berlin2.dtsi > +++ b/arch/arm/boot/dts/berlin2.dtsi > @@ -246,6 +246,45 @@ > }; > }; > > + ahci: sata@e90000 { > + compatible = "marvell,berlin2-ahci", "generic-ahci"; > + reg = <0xe90000 0x1000>; > + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&chip CLKID_SATA>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + sata0: sata-port@0 { > + reg = <0>; > + phys = <&sata_phy 0>; > + status = "disabled"; > + }; > + > + sata1: sata-port@1 { > + reg = <1>; > + phys = <&sata_phy 1>; > + status = "disabled"; > + }; > + }; > + > + sata_phy: phy@e900a0 { > + compatible = "marvell,berlin2-sata-phy"; > + reg = <0xe900a0 0x200>; > + clocks = <&chip CLKID_SATA>; > + #address-cells = <1>; > + #size-cells = <0>; > + #phy-cells = <1>; > + status = "disabled"; > + > + sata-phy@0 { > + reg = <0>; > + }; > + > + sata-phy@1 { > + reg = <1>; > + }; > + }; > + > chip: chip-control@ea0000 { > compatible = "marvell,berlin2-chip-ctrl"; > #clock-cells = <1>; >
-- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |