lkml.org 
[lkml]   [2014]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: dra7-evm: Keep all VDD rails always-on
* Roger Quadros <rogerq@ti.com> [141103 06:44]:
> Hi Nishant,
>
> On 10/21/2014 05:38 PM, Nishanth Menon wrote:
> > DRA7 Data Manual (SPRS857L - August 2014) section 4.1.1 states: "All
> > unused power supply balls must be supplied with the voltages specified
> > in the Section 5.2, Recommended Operating Conditions".
> >
> > This implies that all unused voltage rails for Vayu can never be
> > switched off even if the hardware blocks inside that voltage domain is
> > unused. Switching off these unused rails may result in stability issues
> > on other domains and increased leakage and power-on-hour impacts.
> >
> > J6eco-evm dts file already considers this, however j6evm-dts file needs
> > to be fixed to consider this constraint of the SoC.
> >
> > Signed-off-by: Nishanth Menon <nm@ti.com>
>
> Acked-by: Roger Quadros <rogerq@ti.com>
>
> I'm assuming that vddshv8 (MMC1 power group) can be switched off.

Applying into omap-for-v3.19/dt thanks.

Tony


\
 
 \ /
  Last update: 2014-11-10 22:21    [W:0.056 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site