lkml.org 
[lkml]   [2014]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v9 4/8] ARM: dts: Enable Broadcom Cygnus SoC
From
On Mon, Nov 10, 2014 at 2:50 AM, Paul Bolle <pebolle@tiscali.nl> wrote:
> On Tue, 2014-10-28 at 16:15 -0700, Scott Branden wrote:
>> DT files to enable cygnus consisting on reference designs
>> and cygnus core configuration.
>>
>> Reviewed-by: Ray Jui <rjui@broadcom.com>
>> Reviewed-by: Arun Parameswaran <aparames@broadcom.com>
>> Tested-by: Jonathan Richardson <jonathar@broadcom.com>
>> Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com>
>> Signed-off-by: Scott Branden <sbranden@broadcom.com>
>
> This landed in today's linux-next (ie, next-21041110) as commit
> 8872fc22c267 ("ARM: dts: Enable Broadcom Cygnus SoC").
>
>> arch/arm/boot/dts/Makefile | 4 ++
>> arch/arm/boot/dts/bcm-cygnus-clock.dtsi | 73 ++++++++++++++++++++++
>> arch/arm/boot/dts/bcm-cygnus.dtsi | 100 +++++++++++++++++++++++++++++++
>> arch/arm/boot/dts/bcm911360_entphn.dts | 32 ++++++++++
>> arch/arm/boot/dts/bcm911360k.dts | 32 ++++++++++
>> arch/arm/boot/dts/bcm958300k.dts | 32 ++++++++++
>> 6 files changed, 273 insertions(+)
>> create mode 100644 arch/arm/boot/dts/bcm-cygnus-clock.dtsi
>> create mode 100644 arch/arm/boot/dts/bcm-cygnus.dtsi
>> create mode 100644 arch/arm/boot/dts/bcm911360_entphn.dts
>> create mode 100644 arch/arm/boot/dts/bcm911360k.dts
>> create mode 100644 arch/arm/boot/dts/bcm958300k.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 38c89ca..4b3a590 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -54,6 +54,10 @@ dtb-$(CONFIG_ARCH_AT91) += at91-sama5d4ek.dtb
>> dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
>> dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
>> dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
>> +dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
>> + bcm911360_entphn.dtb \
>> + bcm911360k.dtb \
>> + bcm958300k.dtb
>> dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
>> dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
>> dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
>
> Without patch 1/8 ("ARM: cygnus: Initial support for Broadcom Cygnus
> SoC") CONFIG_ARCH_BCM_CYGNUS will not be set. I guess patch 1/8 will be
> added to linux-next one of these days. Is that correct?

Yes.


-Olof


\
 
 \ /
  Last update: 2014-11-10 20:01    [W:1.217 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site