lkml.org 
[lkml]   [2014]   [Nov]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mfd: twl4030-power: Fix poweroff with PM configuration enabled
On Mon, Nov 10, 2014 at 12:40:19PM +0000, Lee Jones wrote:
> On Sun, 02 Nov 2014, Tony Lindgren wrote:
>
> > Commit e7cd1d1eb16f ("mfd: twl4030-power: Add generic reset
> > configuration") enabled configuring the PM features for twl4030.
> >
> > This caused poweroff command to fail on devices that have the
> > BCI charger on twl4030 wired, or have power wired for VBUS.
> > Instead of powering off, the device reboots. This is because
> > voltage is detected on charger or VBUS with the default bits
> > enabled for the power transition registers.
> >
> > To fix the issue, let's just clear VBUS and CHG bits as we want
> > poweroff command to keep the system powered off.
> >
> > Fixes: e7cd1d1eb16f ("mfd: twl4030-power: Add generic reset configuration")
> > Cc: stable@vger.kernel.org # v3.16+
> > Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
> > Signed-off-by: Tony Lindgren <tony@atomide.com>
>
> Applied to -fixes.
>
> Not sure whether that was an Ack from Russell or not?

A Tested-by would've been more appropriate than an ack.

--
FTTC broadband for 0.8mile line: currently at 9.5Mbps down 400kbps up
according to speedtest.net.


\
 
 \ /
  Last update: 2014-11-10 19:01    [W:0.092 / U:0.264 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site