lkml.org 
[lkml]   [2014]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/4] pinctrl: ralink: add binding documentation
Date
Signed-off-by: John Crispin <blogic@openwrt.org>
---
.../bindings/pinctrl/ralink,rt2880-pinmux.txt | 74 ++++++++++++++++++++
1 file changed, 74 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.txt

diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.txt
new file mode 100644
index 0000000..20e6cc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.txt
@@ -0,0 +1,74 @@
+Ralink rt2880 pinmux controller
+
+Required properties:
+- compatible: "lantiq,rt2880-pinmux"
+- reg: Should contain the physical address and length of the gpio/pinmux
+ register range
+
+The rt2880 pinmux can only set the muxing of pin groups. muxing indiviual pins
+is not supported. There is no pinconf support.
+
+Definition of mux function groups:
+
+Required subnode-properties:
+- ralink,group : An array of strings. Each string contains the name of a group.
+ Valid values for these names are listed below.
+- ralink,function: A string containing the name of the function to mux to the
+ group. Valid values for function names are listed below.
+
+Valid values for group and function names:
+ mux groups (rt2880):
+ i2c, spi, uartlite, jtag, mdio, sdram, pci
+
+ mux functions (rt2880):
+ gpio, i2c, spi, uartlite, jtag, mdio, sdram, pci
+
+ mux groups (rt3050):
+ i2c, spi, uartf, uartlite, jtag, mdio, rgmii, sdram
+
+ mux functions (rt3050):
+ gpio, i2c, spi, uartf, pcm uartf, pcm i2s, i2s uartf, pcm gpio, gpio uartf,
+ gpio i2s, uartlite, jtag, mdio, sdram
+
+ mux groups (rt3352):
+ i2c, spi, uartf, uartlite, jtag, mdio, rgmii, lna, pna, led
+
+ mux functions (rt3050):
+ gpio, i2c, spi, uartf, pcm uartf, pcm i2s, i2s uartf, pcm gpio, gpio uartf,
+ gpio i2s, uartlite, jtag, mdio, lna, pna, led
+
+ mux groups (rt5350):
+ i2c, spi, uartf, uartlite, jtag, pna, led, spi cs1
+
+ mux functions (rt5350):
+ gpio, i2c, spi, uartf, pcm uartf, pcm i2s, i2s uartf, pcm gpio, gpio uartf,
+ gpio i2s, uartlite, jtag, spi_cs1, wdg
+
+
+Example:
+ pinctrl {
+ compatible = "ralink,rt2880-pinmux";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinctrl0 {
+ sdram {
+ ralink,group = "sdram";
+ ralink,function = "sdram";
+ };
+ };
+
+ spi_pins: spi {
+ spi {
+ ralink,group = "spi";
+ ralink,function = "spi";
+ };
+ };
+ uartlite_pins: uartlite {
+ uart {
+ ralink,group = "uartlite";
+ ralink,function = "uartlite";
+ };
+ };
+ };
--
1.7.10.4


\
 
 \ /
  Last update: 2014-10-09 22:01    [W:0.039 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site