lkml.org 
[lkml]   [2014]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] thermal: ti-soc-thermal: Switch to using managed resources
From
On Thu, Oct 9, 2014 at 2:50 AM, Vladimir Zapolskiy <vz@mleia.com> wrote:
> On 07.10.2014 10:11, Pramod Gurav wrote:
>>
>> This change switches to managed resource APIs to allocated resources
>> such as irq, clock. Hence does away with release statements of the
>> same resorces in error lables and remove function.
>>
>> Cc: Eduardo Valentin<edubezval@gmail.com>
>> Cc: Zhang Rui<rui.zhang@intel.com>
>> Cc: linux-pm@vger.kernel.org
>> Signed-off-by: Pramod Gurav<pramod.gurav@smartplayin.com>
>> ---
>> Change since v1:
>>
>> Passing struct device to devm_clk_get was missing. Fix the same in v2.
>>
>> drivers/thermal/ti-soc-thermal/ti-bandgap.c | 46
>> +++++++--------------------
>> 1 file changed, 12 insertions(+), 34 deletions(-)
>>
>> diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
>> b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
>> index 634b6ce..22013ef 100644
>> --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c
>> +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c
>> @@ -1060,7 +1060,7 @@ static int ti_bandgap_tshut_init(struct ti_bandgap
>> *bgp,
>> int status;
>>
>> /* Request for gpio_86 line */
>> - status = gpio_request(gpio_nr, "tshut");
>> + status = devm_gpio_request(&pdev->dev, gpio_nr, "tshut");
>> if (status< 0) {
>> dev_err(bgp->dev, "Could not request for TSHUT GPIO:%i\n",
>> 86);
>> return status;
>> @@ -1071,11 +1071,12 @@ static int ti_bandgap_tshut_init(struct ti_bandgap
>> *bgp,
>> return status;
>> }
>>
>> - status = request_irq(gpio_to_irq(gpio_nr),
>> ti_bandgap_tshut_irq_handler,
>> - IRQF_TRIGGER_RISING, "tshut", NULL);
>> + status = devm_request_irq(&pdev->dev, gpio_to_irq(gpio_nr),
>> + ti_bandgap_tshut_irq_handler,
>> + IRQF_TRIGGER_RISING, "tshut", NULL);
>> if (status) {
>> - gpio_free(gpio_nr);
>> dev_err(bgp->dev, "request irq failed for TSHUT");
>> + return status;
>> }
>>
>> return 0;
>
>
> Remove two more lines:
>
> if (status)
> dev_err(bgp->dev, "request irq failed for TSHUT");
>
> return status;
Thanks fore comment. Will do this here. Same can be done in another
function which requests one more irq.

>
>
>> @@ -1104,7 +1105,7 @@ static int ti_bandgap_talert_init(struct ti_bandgap
>> *bgp,
>> dev_err(&pdev->dev, "get_irq failed\n");
>> return bgp->irq;
>> }
>> - ret = request_threaded_irq(bgp->irq, NULL,
>> + ret = devm_request_threaded_irq(&pdev->dev, bgp->irq, NULL,
>> ti_bandgap_talert_irq_handler,
>> IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
>> "talert", bgp);
>> @@ -1212,21 +1213,17 @@ int ti_bandgap_probe(struct platform_device *pdev)
>> }
>> }
>>
>> - bgp->fclock = clk_get(NULL, bgp->conf->fclock_name);
>> - ret = IS_ERR(bgp->fclock);
>> - if (ret) {
>> + bgp->fclock = devm_clk_get(&pdev->dev, NULL,
>> bgp->conf->fclock_name);
>> + if (IS_ERR(bgp->fclock)) {
>> dev_err(&pdev->dev, "failed to request fclock
>> reference\n");
>> - ret = PTR_ERR(bgp->fclock);
>> - goto free_irqs;
>> + return PTR_ERR(bgp->fclock);
>> }
>>
>> - bgp->div_clk = clk_get(NULL, bgp->conf->div_ck_name);
>> - ret = IS_ERR(bgp->div_clk);
>> - if (ret) {
>> + bgp->div_clk = devm_clk_get(&pdev->dev, NULL,
>> bgp->conf->div_ck_name);
>> + if (IS_ERR(bgp->div_clk)) {
>> dev_err(&pdev->dev,
>> "failed to request div_ts_ck clock ref\n");
>> - ret = PTR_ERR(bgp->div_clk);
>> - goto free_irqs;
>> + return PTR_ERR(bgp->div_clk);
>> }
>>
>> for (i = 0; i< bgp->conf->sensor_count; i++) {
>> @@ -1251,7 +1248,6 @@ int ti_bandgap_probe(struct platform_device *pdev)
>> clk_rate<= 0) {
>> ret = -ENODEV;
>> dev_err(&pdev->dev, "wrong clock rate (%d)\n", clk_rate);
>> - goto put_clks;
>> }
>>
>> ret = clk_set_rate(bgp->div_clk, clk_rate);
>
>
> Fallback, rewriting ret value and attempting to set wrong clk_rate?
>
My wrong. will return -ENODEV in error case in v3.

>
>> @@ -1357,14 +1353,6 @@ remove_sensors:
>> disable_clk:
>> if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
>> clk_disable_unprepare(bgp->fclock);
>> -put_clks:
>> - clk_put(bgp->fclock);
>> - clk_put(bgp->div_clk);
>> -free_irqs:
>> - if (TI_BANDGAP_HAS(bgp, TSHUT)) {
>> - free_irq(gpio_to_irq(bgp->tshut_gpio), NULL);
>> - gpio_free(bgp->tshut_gpio);
>> - }
>>
>> return ret;
>> }
>> @@ -1388,16 +1376,6 @@ int ti_bandgap_remove(struct platform_device *pdev)
>>
>> if (TI_BANDGAP_HAS(bgp, CLK_CTRL))
>> clk_disable_unprepare(bgp->fclock);
>> - clk_put(bgp->fclock);
>> - clk_put(bgp->div_clk);
>> -
>> - if (TI_BANDGAP_HAS(bgp, TALERT))
>> - free_irq(bgp->irq, bgp);
>> -
>> - if (TI_BANDGAP_HAS(bgp, TSHUT)) {
>> - free_irq(gpio_to_irq(bgp->tshut_gpio), NULL);
>> - gpio_free(bgp->tshut_gpio);
>> - }
>>
>> return 0;
>> }
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/



--
Thanks and Regards
Pramod


\
 
 \ /
  Last update: 2014-10-09 10:02    [W:0.058 / U:0.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site