lkml.org 
[lkml]   [2014]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mfd: ab8500-sysctrl: Drop ab8500_restart
Date
ab8500_restart is not called from anywhere in the kernel, so drop it.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/mfd/ab8500-sysctrl.c | 57 -------------------------------
include/linux/mfd/abx500/ab8500-sysctrl.h | 1 -
2 files changed, 58 deletions(-)

diff --git a/drivers/mfd/ab8500-sysctrl.c b/drivers/mfd/ab8500-sysctrl.c
index 8e0dae5..94dbcdd 100644
--- a/drivers/mfd/ab8500-sysctrl.c
+++ b/drivers/mfd/ab8500-sysctrl.c
@@ -85,63 +85,6 @@ shutdown:
}
}

-/*
- * Use the AB WD to reset the platform. It will perform a hard
- * reset instead of a soft reset. Write the reset reason to
- * the AB before reset, which can be read upon restart.
- */
-void ab8500_restart(char mode, const char *cmd)
-{
- struct ab8500_platform_data *plat;
- struct ab8500_sysctrl_platform_data *pdata;
- u16 reason = 0;
- u8 val;
-
- if (sysctrl_dev == NULL) {
- pr_err("%s: sysctrl not initialized\n", __func__);
- return;
- }
-
- plat = dev_get_platdata(sysctrl_dev->parent);
- pdata = plat->sysctrl;
- if (pdata && pdata->reboot_reason_code)
- reason = pdata->reboot_reason_code(cmd);
- else
- pr_warn("[%s] No reboot reason set. Default reason %d\n",
- __func__, reason);
-
- /*
- * Disable RTC alarm, just a precaution so that no alarm
- * is running when WD reset is executed.
- */
- abx500_get_register_interruptible(sysctrl_dev, AB8500_RTC,
- RTC_CTRL , &val);
- abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
- RTC_CTRL , (val & ~RTC_ALARM_ENABLE));
-
- /*
- * Android is not using the RTC alarm registers during reboot
- * so we borrow them for writing the reason of reset
- */
-
- /* reason[8 LSB] */
- val = reason & 0xFF;
- abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
- AB8500_ALARM_MIN_LOW , val);
-
- /* reason[8 MSB] */
- val = (reason>>8) & 0xFF;
- abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
- AB8500_ALARM_MIN_MID , val);
-
- /* Setting WD timeout to 0 */
- ab8500_sysctrl_write(AB8500_MAINWDOGTIMER, 0xFF, 0x0);
-
- /* Setting the parameters to AB8500 WD*/
- ab8500_sysctrl_write(AB8500_MAINWDOGCTRL, 0xFF, (AB8500_ENABLE_WD |
- AB8500_WD_RESTART_ON_EXPIRE | AB8500_KICK_WD));
-}
-
static inline bool valid_bank(u8 bank)
{
return ((bank == AB8500_SYS_CTRL1_BLOCK) ||
diff --git a/include/linux/mfd/abx500/ab8500-sysctrl.h b/include/linux/mfd/abx500/ab8500-sysctrl.h
index adba89d..6893127 100644
--- a/include/linux/mfd/abx500/ab8500-sysctrl.h
+++ b/include/linux/mfd/abx500/ab8500-sysctrl.h
@@ -12,7 +12,6 @@

int ab8500_sysctrl_read(u16 reg, u8 *value);
int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value);
-void ab8500_restart(char mode, const char *cmd);

#else

--
1.9.1


\
 
 \ /
  Last update: 2014-10-09 19:01    [W:0.039 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site