lkml.org 
[lkml]   [2014]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 2/2] power: reset: document LTC2952 poweroff support
Hi,

On Thu, Oct 09, 2014 at 03:50:42PM +0100, Frans Klaver wrote:
> From: René Moll <linux@r-moll.nl>
>
> Signed-off-by: René Moll <linux@r-moll.nl>
> Signed-off-by: Tjerk Hofmeijer <tjerk.hofmeijer@xsens.com>
> Signed-off-by: Frans Klaver <frans.klaver@xsens.com>
> ---
> .../bindings/power/reset/ltc2952-poweroff.txt | 31 ++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt
>
> diff --git a/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt
> new file mode 100644
> index 0000000..c3f3d9e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt
> @@ -0,0 +1,31 @@
> +Binding for the LTC2952 PowerPath controller
> +
> +This chip is used to externally trigger a system shut down. Once the trigger
> +has been sent, the chips watchdog has to be reset to gracefully shut down.

s/chips/chip's/

> If +the Linux systems decides to shut down, it powers off the platform
> via the +poweroff signal.

This sentence can go; the binding should describe the hardware rather
than the Linux behaviour.

Thanks,
Mark.

> +
> +Required properties:
> +
> +- compatible: Must be: "lltc,ltc2952"
> +- watchdog-gpios: phandle + gpio-specifier for the GPIO connected to the
> + chip's watchdog line
> +- poweroff-gpios: phandle + gpio-specifier for the GPIO connected to the
> + chip's kill line
> +
> +Optional properties:
> +
> +- trigger-gpios: phandle + gpio-specifier for the GPIO connected to the
> + chip's trigger line. If this property is not set, the
> + trigger function is ignored and the chip is kept alive
> + until an explicit kill signal is received
> +
> +Example:
> +
> +ltc2952 {
> + compatible = "lltc,ltc2952";
> +
> + trigger-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
> + watchdog-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
> + poweroff-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
> +};
> --
> 2.1.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-10-09 17:43    [W:0.063 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site