lkml.org 
[lkml]   [2014]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RFT 0/8] Marvell PXA168 libphy handling and Berlin Ethernet
On 10/09/2014 04:33 PM, Thomas Petazzoni wrote:
> Dear Sebastian Hesselbarth,
>
> On Thu, 9 Oct 2014 14:38:58 +0200, Sebastian Hesselbarth wrote:
>
>> This patch series deals with a removing a IP feature that can be found
>> on all currently supported Marvell Ethernet IP (pxa168_eth, mv643xx_eth,
>> mvneta). The MAC IP allows to automatically perform PHY auto-negotiation
>> without software interaction.
>>
>> However, this feature (a) fundamentally clashes with the way libphy works
>> and (b) is unable to deal with quirky PHYs that require special treatment.
>> In this series, pxa168_eth driver is rewritten to completely disable that
>> feature and properly deal with libphy provided PHYs. The other two drivers
>> are suspect to future patch sets, also removing the code related with it.
>
> Hum, in mvneta, we already disabled the automatic negotiation and use
> libphy. What makes you think the current mvneta driver is wrong in this
> respect?

I didn't check mvneta, but remember Ezequiel didn't clear all AN bits
in the barebox driver (which is based on Linux mvneta). Just mentioned
that I'll have a closer look at it.

But I agree, regarding libphy support mvneta is probably the best
already.

Sebastian



\
 
 \ /
  Last update: 2014-10-09 17:21    [W:0.134 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site