lkml.org 
[lkml]   [2014]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC
Date
On Tuesday 07 October 2014 22:27:00 Scott Branden wrote:
> From: Jonathan Richardson <jonathar@broadcom.com>
>
> Adds initial support for the Cygnus SoC based on Broadcom’s iProc series.
>
> Reviewed-by: Ray Jui <rjui@broadcom.com>
> Reviewed-by: Desmond Liu <desmondl@broadcom.com>
> Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com>
> Tested-by: Jonathan Richardson <jonathar@broadcom.com>
> Signed-off-by: Scott Branden <sbranden@broadcom.com>
> ---
> arch/arm/mach-bcm/Kconfig | 31 ++++++++
> arch/arm/mach-bcm/Makefile | 3 +
> arch/arm/mach-bcm/bcm_cygnus.c | 166 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 200 insertions(+)
> create mode 100644 arch/arm/mach-bcm/bcm_cygnus.c
>
> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
> index fc93800..2dd3f78 100644
> --- a/arch/arm/mach-bcm/Kconfig
> +++ b/arch/arm/mach-bcm/Kconfig
> @@ -5,6 +5,37 @@ menuconfig ARCH_BCM
>
> if ARCH_BCM
>
> +config ARCH_BCM_IPROC
> + bool "Broadcom ARMv7 iProc boards" if ARCH_MULTI_V7
> + select ARM_GIC
> + select CACHE_L2X0
> + select HAVE_ARM_TWD if LOCAL_TIMERS
> + select HAVE_CLK
> + select CLKSRC_OF
> + select CLKSRC_MMIO
> + select GENERIC_CLOCKEVENTS
> + select ARM_GLOBAL_TIMER
> + select ARCH_REQUIRE_GPIOLIB
> + select ARM_AMBA
> + select PINCTRL
> + select DEBUG_UART_8250

A lot of these are implied by ARCH_MULTI_V7, just drop them here.

Some others like DEBUG_UART_8250 should remain user-selectable, if
the platform works without them.

> + help
> + This enables support for systems based on Broadcom IPROC architected SoCs.
> + The IPROC complex contains one or more ARM CPUs along with common
> + core periperals. Application specific SoCs are created by adding a
> + uArchitecture containing peripherals outside of the IPROC complex.
> + Currently supported SoCs are Cygnus.
> +
> +menu "iProc SoC based Machine types"
> + depends on ARCH_BCM_IPROC
> +
> + config ARCH_BCM_CYGNUS
> + bool "Support Broadcom Cygnus board"
> + select USB_ARCH_HAS_EHCI if USB_SUPPORT
> + help
> + Support for Broadcom Cygnus SoC.
> +endmenu

I don't think you need per-board config options. The main option
above should be enough.

> +
> +#define CRMU_MAIL_BOX1 0x03024028
> +#define CRMU_SOFT_RESET_CMD 0xFFFFFFFF

Never hardcode physical register locations in source. This should come
from DT, and get moved into a regular 'reset' device driver.

You probably want to use drivers/power/reset/syscon-reboot.c

> +/* CRU_RESET register */
> +static void * __iomem crmu_mail_box1_reg;
> +
> +#ifdef CONFIG_NEON
> +
> +#define CRU_BASE 0x1800e000
> +#define CRU_SIZE 0x34
> +#define CRU_CONTROL_OFFSET 0x0
> +#define CRU_PWRDWN_EN_OFFSET 0x4
> +#define CRU_PWRDWN_STATUS_OFFSET 0x8
> +#define CRU_NEON0_HW_RESET 6
> +#define CRU_CLAMP_ON_NEON0 20
> +#define CRU_PWRONIN_NEON0 21
> +#define CRU_PWRONOUT_NEON0 21
> +#define CRU_PWROKIN_NEON0 22
> +#define CRU_PWROKOUT_NEON0 22
> +#define CRU_STATUS_DELAY_NS 500
> +#define CRU_MAX_RETRY_COUNT 10
> +#define CRU_RETRY_INTVL_US 1
> +
> +/* Power up the NEON/VFPv3 block. */
> +static void bcm_cygnus_powerup_neon(void)
> +{
> + void * __iomem cru_base = ioremap(CRU_BASE, CRU_SIZE);
> + u32 reg, i;

Same thing here: this should really use the device node for CRU.

Can you describe what the CRU is? Is this specific to NEON or is
it some general-purpose power management unit?

> +static void __init bcm_cygnus_init(void)
> +{
> + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
> +
> + l2x0_of_init(0, ~0UL);

The l2x0_of_init can be removed now, just move the arguments into the
respective fields of the machine descriptor.

> + crmu_mail_box1_reg = ioremap(CRMU_MAIL_BOX1, SZ_4);
> + WARN_ON(!crmu_mail_box1_reg);
> +
> +#ifdef CONFIG_NEON
> + bcm_cygnus_powerup_neon();
> +#endif
> +}

In general, try to avoid #ifdef, use

if (IS_ENABLED(CONFIG_NEON))
bcm_cygnus_powerup_neon();

instead.

> +
> +static const char const *bcm_cygnus_dt_compat[] = {
> + "brcm,cygnus",
> + NULL,
> +};
> +
> +DT_MACHINE_START(BCM_CYGNUS_DT, "Broadcom Cygnus SoC")
> + .init_machine = bcm_cygnus_init,
> + .map_io = debug_ll_io_init,
> + .dt_compat = bcm_cygnus_dt_compat,
> + .restart = bcm_cygnus_restart
> +MACHINE_END

The map_io pointer is unnecessary, and the restart pointer should get
set by the reset driver. I hope we can find a way to avoid the
bcm_cygnus_init callback as well.

Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-10-08 10:21    [W:0.183 / U:0.620 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site