Messages in this thread Patch in this message | | | From | Ricardo Ribalda Delgado <> | Subject | [PATCH 06/12] serial/8250: Remove obsolete handling of rs485 ioctls | Date | Wed, 8 Oct 2014 21:57:32 +0200 |
| |
There is no more users for this functions. All the 8250 drivers are using the rs485 handler on serial_core instead.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Alan Cox <alan@linux.intel.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: linux-serial@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> --- drivers/tty/serial/8250/8250_core.c | 39 ------------------------------------- include/linux/serial_8250.h | 3 --- 2 files changed, 42 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 6cdd4cf..5d62129 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -2975,42 +2975,6 @@ serial8250_verify_port(struct uart_port *port, struct serial_struct *ser) return 0; } -static int serial8250_ioctl(struct uart_port *port, unsigned int cmd, - unsigned long arg) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - int ret; - struct serial_rs485 rs485_config; - - if (!up->rs485_config) - return -ENOIOCTLCMD; - - switch (cmd) { - case TIOCSRS485: - if (copy_from_user(&rs485_config, (void __user *)arg, - sizeof(rs485_config))) - return -EFAULT; - - ret = up->rs485_config(up, &rs485_config); - if (ret) - return ret; - - memcpy(&up->rs485, &rs485_config, sizeof(rs485_config)); - - return 0; - case TIOCGRS485: - if (copy_to_user((void __user *)arg, &up->rs485, - sizeof(up->rs485))) - return -EFAULT; - return 0; - default: - break; - } - - return -ENOIOCTLCMD; -} - static const char * serial8250_type(struct uart_port *port) { @@ -3042,7 +3006,6 @@ static struct uart_ops serial8250_pops = { .request_port = serial8250_request_port, .config_port = serial8250_config_port, .verify_port = serial8250_verify_port, - .ioctl = serial8250_ioctl, #ifdef CONFIG_CONSOLE_POLL .poll_get_char = serial8250_get_poll_char, .poll_put_char = serial8250_put_poll_char, @@ -3585,8 +3548,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up) uart->port.fifosize = up->port.fifosize; uart->tx_loadsz = up->tx_loadsz; uart->capabilities = up->capabilities; - uart->rs485_config = up->rs485_config; - uart->rs485 = up->rs485; uart->port.throttle = up->port.throttle; uart->port.unthrottle = up->port.unthrottle; uart->port.rs485_config = up->port.rs485_config; diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index 3df10d5..e02acf0 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -97,13 +97,10 @@ struct uart_8250_port { unsigned char msr_saved_flags; struct uart_8250_dma *dma; - struct serial_rs485 rs485; /* 8250 specific callbacks */ int (*dl_read)(struct uart_8250_port *); void (*dl_write)(struct uart_8250_port *, int); - int (*rs485_config)(struct uart_8250_port *, - struct serial_rs485 *rs485); }; static inline struct uart_8250_port *up_to_u8250p(struct uart_port *up) -- 2.1.1
| |