lkml.org 
[lkml]   [2014]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[GIT pull] timer changes for 3.18
Linus,

please pull the latest timers-core-for-linus git tree from:

git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers-core-for-linus

Nothing really exciting this time:

- A few fixlets in the NOHZ code

- A new ARM SoC timer abomination. One should expect that we have
enough of them already, but they insist on inventing new ones.

- The usual bunch of ARM SoC timer updates. That feels like herding
cats.

Thanks,

tglx

------------------>
Carlo Caione (2):
ARM: meson: documentation: Add timer documentation
ARM: meson6: clocksource: Add Meson6 timer support

Dan Carpenter (1):
timerfd: Remove an always true check

Gael Portay (1):
clocksource: tcb_clksrc: Sanitize IRQ request

Hao Liu (1):
clocksource: sirf: Disable counter before re-setting it

Michal Simek (1):
clocksource: cadence_ttc: Add support for 32bit mode

Nathan Lynch (3):
clocksource: arm_arch_timer: Change clocksource name if CP15 unavailable
clocksource: arm_arch_timer: Enable counter access for 32-bit ARM
clocksource: arm_arch_timer: Consolidate arch_timer_evtstrm_enable

Simon Horman (3):
clocksource: sh_cmt: Document SoC specific bindings
clocksource: sh_mtu2: Document r7s72100 binding
clocksource: sh_tmu: Document r8a7779 binding

Stefan Agner (1):
clocksource: vf_pit_timer: Support shutdown mode

Sudeep Holla (1):
clocksource: arm_arch_timer: Discard unavailable timers correctly

Viresh Kumar (2):
nohz: Fix spurious periodic tick behaviour in low-res dynticks mode
nohz: Avoid tick's double reprogramming in highres mode


.../bindings/timer/amlogic,meson6-timer.txt | 15 ++
.../devicetree/bindings/timer/renesas,cmt.txt | 44 +++++-
.../devicetree/bindings/timer/renesas,mtu2.txt | 7 +-
.../devicetree/bindings/timer/renesas,tmu.txt | 7 +-
arch/arm/include/asm/arch_timer.h | 25 ---
arch/arm64/include/asm/arch_timer.h | 31 ----
drivers/clocksource/Kconfig | 3 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/arm_arch_timer.c | 64 +++++++-
drivers/clocksource/cadence_ttc_timer.c | 15 +-
drivers/clocksource/meson6_timer.c | 167 +++++++++++++++++++++
drivers/clocksource/tcb_clksrc.c | 13 +-
drivers/clocksource/timer-marco.c | 5 +-
drivers/clocksource/vf_pit_timer.c | 4 +
fs/timerfd.c | 3 +-
kernel/time/tick-sched.c | 8 +
16 files changed, 323 insertions(+), 89 deletions(-)
create mode 100644 Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt
create mode 100644 drivers/clocksource/meson6_timer.c

diff --git a/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt
new file mode 100644
index 000000000000..a092053f7902
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/amlogic,meson6-timer.txt
@@ -0,0 +1,15 @@
+Amlogic Meson6 SoCs Timer Controller
+
+Required properties:
+
+- compatible : should be "amlogic,meson6-timer"
+- reg : Specifies base physical address and size of the registers.
+- interrupts : The interrupt of the first timer
+
+Example:
+
+timer@c1109940 {
+ compatible = "amlogic,meson6-timer";
+ reg = <0xc1109940 0x14>;
+ interrupts = <0 10 1>;
+};
diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
index a17418b0ece3..1a05c1b243c1 100644
--- a/Documentation/devicetree/bindings/timer/renesas,cmt.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
@@ -11,15 +11,47 @@ datasheets.

Required Properties:

- - compatible: must contain one of the following.
- - "renesas,cmt-32" for the 32-bit CMT
+ - compatible: must contain one or more of the following:
+ - "renesas,cmt-32-r8a7740" for the r8a7740 32-bit CMT
+ (CMT0)
+ - "renesas,cmt-32-sh7372" for the sh7372 32-bit CMT
+ (CMT0)
+ - "renesas,cmt-32-sh73a0" for the sh73a0 32-bit CMT
+ (CMT0)
+ - "renesas,cmt-32" for all 32-bit CMT without fast clock support
(CMT0 on sh7372, sh73a0 and r8a7740)
- - "renesas,cmt-32-fast" for the 32-bit CMT with fast clock support
+ This is a fallback for the above renesas,cmt-32-* entries.
+
+ - "renesas,cmt-32-fast-r8a7740" for the r8a7740 32-bit CMT with fast
+ clock support (CMT[234])
+ - "renesas,cmt-32-fast-sh7372" for the sh7372 32-bit CMT with fast
+ clock support (CMT[234])
+ - "renesas,cmt-32-fast-sh73a0" for the sh73A0 32-bit CMT with fast
+ clock support (CMT[234])
+ - "renesas,cmt-32-fast" for all 32-bit CMT with fast clock support
(CMT[234] on sh7372, sh73a0 and r8a7740)
- - "renesas,cmt-48" for the 48-bit CMT
+ This is a fallback for the above renesas,cmt-32-fast-* entries.
+
+ - "renesas,cmt-48-sh7372" for the sh7372 48-bit CMT
+ (CMT1)
+ - "renesas,cmt-48-sh73a0" for the sh73A0 48-bit CMT
+ (CMT1)
+ - "renesas,cmt-48-r8a7740" for the r8a7740 48-bit CMT
+ (CMT1)
+ - "renesas,cmt-48" for all non-second generation 48-bit CMT
(CMT1 on sh7372, sh73a0 and r8a7740)
- - "renesas,cmt-48-gen2" for the second generation 48-bit CMT
+ This is a fallback for the above renesas,cmt-48-* entries.
+
+ - "renesas,cmt-48-r8a73a4" for the r8a73a4 48-bit CMT
+ (CMT[01])
+ - "renesas,cmt-48-r8a7790" for the r8a7790 48-bit CMT
+ (CMT[01])
+ - "renesas,cmt-48-r8a7791" for the r8a7791 48-bit CMT
+ (CMT[01])
+ - "renesas,cmt-48-gen2" for all second generation 48-bit CMT
(CMT[01] on r8a73a4, r8a7790 and r8a7791)
+ This is a fallback for the renesas,cmt-48-r8a73a4,
+ renesas,cmt-48-r8a7790 and renesas,cmt-48-r8a7791 entries.

- reg: base address and length of the registers block for the timer module.
- interrupts: interrupt-specifier for the timer, one per channel.
@@ -36,7 +68,7 @@ Example: R8A7790 (R-Car H2) CMT0 node
them channels 0 and 1 in the documentation.

cmt0: timer@ffca0000 {
- compatible = "renesas,cmt-48-gen2";
+ compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2";
reg = <0 0xffca0000 0 0x1004>;
interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
<0 142 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt
index 917453f826bc..d9a8d5af1a21 100644
--- a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt
@@ -8,7 +8,10 @@ are independent. The MTU2 hardware supports five channels indexed from 0 to 4.

Required Properties:

- - compatible: must contain "renesas,mtu2"
+ - compatible: must be one or more of the following:
+ - "renesas,mtu2-r7s72100" for the r7s72100 MTU2
+ - "renesas,mtu2" for any MTU2
+ This is a fallback for the above renesas,mtu2-* entries

- reg: base address and length of the registers block for the timer module.

@@ -26,7 +29,7 @@ Required Properties:
Example: R7S72100 (RZ/A1H) MTU2 node

mtu2: timer@fcff0000 {
- compatible = "renesas,mtu2";
+ compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
reg = <0xfcff0000 0x400>;
interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>,
<0 146 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.txt b/Documentation/devicetree/bindings/timer/renesas,tmu.txt
index 425d0c5f4aee..7db89fb25444 100644
--- a/Documentation/devicetree/bindings/timer/renesas,tmu.txt
+++ b/Documentation/devicetree/bindings/timer/renesas,tmu.txt
@@ -8,7 +8,10 @@ are independent. The TMU hardware supports up to three channels.

Required Properties:

- - compatible: must contain "renesas,tmu"
+ - compatible: must contain one or more of the following:
+ - "renesas,tmu-r8a7779" for the r8a7779 TMU
+ - "renesas,tmu" for any TMU.
+ This is a fallback for the above renesas,tmu-* entries

- reg: base address and length of the registers block for the timer module.

@@ -27,7 +30,7 @@ Optional Properties:
Example: R8A7779 (R-Car H1) TMU0 node

tmu0: timer@ffd80000 {
- compatible = "renesas,tmu";
+ compatible = "renesas,tmu-r8a7779", "renesas,tmu";
reg = <0xffd80000 0x30>;
interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
<0 33 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h
index 0704e0cf5571..92793ba69c40 100644
--- a/arch/arm/include/asm/arch_timer.h
+++ b/arch/arm/include/asm/arch_timer.h
@@ -99,31 +99,6 @@ static inline void arch_timer_set_cntkctl(u32 cntkctl)
asm volatile("mcr p15, 0, %0, c14, c1, 0" : : "r" (cntkctl));
}

-static inline void arch_counter_set_user_access(void)
-{
- u32 cntkctl = arch_timer_get_cntkctl();
-
- /* Disable user access to both physical/virtual counters/timers */
- /* Also disable virtual event stream */
- cntkctl &= ~(ARCH_TIMER_USR_PT_ACCESS_EN
- | ARCH_TIMER_USR_VT_ACCESS_EN
- | ARCH_TIMER_VIRT_EVT_EN
- | ARCH_TIMER_USR_VCT_ACCESS_EN
- | ARCH_TIMER_USR_PCT_ACCESS_EN);
- arch_timer_set_cntkctl(cntkctl);
-}
-
-static inline void arch_timer_evtstrm_enable(int divider)
-{
- u32 cntkctl = arch_timer_get_cntkctl();
- cntkctl &= ~ARCH_TIMER_EVT_TRIGGER_MASK;
- /* Set the divider and enable virtual event stream */
- cntkctl |= (divider << ARCH_TIMER_EVT_TRIGGER_SHIFT)
- | ARCH_TIMER_VIRT_EVT_EN;
- arch_timer_set_cntkctl(cntkctl);
- elf_hwcap |= HWCAP_EVTSTRM;
-}
-
#endif

#endif
diff --git a/arch/arm64/include/asm/arch_timer.h b/arch/arm64/include/asm/arch_timer.h
index 9400596a0f39..f19097134b02 100644
--- a/arch/arm64/include/asm/arch_timer.h
+++ b/arch/arm64/include/asm/arch_timer.h
@@ -104,37 +104,6 @@ static inline void arch_timer_set_cntkctl(u32 cntkctl)
asm volatile("msr cntkctl_el1, %0" : : "r" (cntkctl));
}

-static inline void arch_counter_set_user_access(void)
-{
- u32 cntkctl = arch_timer_get_cntkctl();
-
- /* Disable user access to the timers and the physical counter */
- /* Also disable virtual event stream */
- cntkctl &= ~(ARCH_TIMER_USR_PT_ACCESS_EN
- | ARCH_TIMER_USR_VT_ACCESS_EN
- | ARCH_TIMER_VIRT_EVT_EN
- | ARCH_TIMER_USR_PCT_ACCESS_EN);
-
- /* Enable user access to the virtual counter */
- cntkctl |= ARCH_TIMER_USR_VCT_ACCESS_EN;
-
- arch_timer_set_cntkctl(cntkctl);
-}
-
-static inline void arch_timer_evtstrm_enable(int divider)
-{
- u32 cntkctl = arch_timer_get_cntkctl();
- cntkctl &= ~ARCH_TIMER_EVT_TRIGGER_MASK;
- /* Set the divider and enable virtual event stream */
- cntkctl |= (divider << ARCH_TIMER_EVT_TRIGGER_SHIFT)
- | ARCH_TIMER_VIRT_EVT_EN;
- arch_timer_set_cntkctl(cntkctl);
- elf_hwcap |= HWCAP_EVTSTRM;
-#ifdef CONFIG_COMPAT
- compat_elf_hwcap |= COMPAT_HWCAP_EVTSTRM;
-#endif
-}
-
static inline u64 arch_counter_get_cntvct(void)
{
u64 cval;
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index cfd6519df661..38029ca4e777 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -30,6 +30,9 @@ config ARMADA_370_XP_TIMER
bool
select CLKSRC_OF

+config MESON6_TIMER
+ bool
+
config ORION_TIMER
select CLKSRC_OF
select CLKSRC_MMIO
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 7fd9fd1dff42..e4ae987d70aa 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o
obj-$(CONFIG_ARCH_U300) += timer-u300.o
obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o
obj-$(CONFIG_SUN5I_HSTIMER) += timer-sun5i.o
+obj-$(CONFIG_MESON6_TIMER) += meson6_timer.o
obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o
obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
obj-$(CONFIG_ARCH_NSPIRE) += zevio-timer.o
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 5163ec13429d..2133f9d59d06 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -299,6 +299,21 @@ static void __arch_timer_setup(unsigned type,
clockevents_config_and_register(clk, arch_timer_rate, 0xf, 0x7fffffff);
}

+static void arch_timer_evtstrm_enable(int divider)
+{
+ u32 cntkctl = arch_timer_get_cntkctl();
+
+ cntkctl &= ~ARCH_TIMER_EVT_TRIGGER_MASK;
+ /* Set the divider and enable virtual event stream */
+ cntkctl |= (divider << ARCH_TIMER_EVT_TRIGGER_SHIFT)
+ | ARCH_TIMER_VIRT_EVT_EN;
+ arch_timer_set_cntkctl(cntkctl);
+ elf_hwcap |= HWCAP_EVTSTRM;
+#ifdef CONFIG_COMPAT
+ compat_elf_hwcap |= COMPAT_HWCAP_EVTSTRM;
+#endif
+}
+
static void arch_timer_configure_evtstream(void)
{
int evt_stream_div, pos;
@@ -312,6 +327,23 @@ static void arch_timer_configure_evtstream(void)
arch_timer_evtstrm_enable(min(pos, 15));
}

+static void arch_counter_set_user_access(void)
+{
+ u32 cntkctl = arch_timer_get_cntkctl();
+
+ /* Disable user access to the timers and the physical counter */
+ /* Also disable virtual event stream */
+ cntkctl &= ~(ARCH_TIMER_USR_PT_ACCESS_EN
+ | ARCH_TIMER_USR_VT_ACCESS_EN
+ | ARCH_TIMER_VIRT_EVT_EN
+ | ARCH_TIMER_USR_PCT_ACCESS_EN);
+
+ /* Enable user access to the virtual counter */
+ cntkctl |= ARCH_TIMER_USR_VCT_ACCESS_EN;
+
+ arch_timer_set_cntkctl(cntkctl);
+}
+
static int arch_timer_setup(struct clock_event_device *clk)
{
__arch_timer_setup(ARCH_CP15_TIMER, clk);
@@ -429,11 +461,19 @@ static void __init arch_counter_register(unsigned type)
u64 start_count;

/* Register the CP15 based counter if we have one */
- if (type & ARCH_CP15_TIMER)
+ if (type & ARCH_CP15_TIMER) {
arch_timer_read_counter = arch_counter_get_cntvct;
- else
+ } else {
arch_timer_read_counter = arch_counter_get_cntvct_mem;

+ /* If the clocksource name is "arch_sys_counter" the
+ * VDSO will attempt to read the CP15-based counter.
+ * Ensure this does not happen when CP15-based
+ * counter is not available.
+ */
+ clocksource_counter.name = "arch_mem_counter";
+ }
+
start_count = arch_timer_read_counter();
clocksource_register_hz(&clocksource_counter, arch_timer_rate);
cyclecounter.mult = clocksource_counter.mult;
@@ -616,17 +656,29 @@ static const struct of_device_id arch_timer_mem_of_match[] __initconst = {
{},
};

+static bool __init
+arch_timer_probed(int type, const struct of_device_id *matches)
+{
+ struct device_node *dn;
+ bool probed = false;
+
+ dn = of_find_matching_node(NULL, matches);
+ if (dn && of_device_is_available(dn) && (arch_timers_present & type))
+ probed = true;
+ of_node_put(dn);
+
+ return probed;
+}
+
static void __init arch_timer_common_init(void)
{
unsigned mask = ARCH_CP15_TIMER | ARCH_MEM_TIMER;

/* Wait until both nodes are probed if we have two timers */
if ((arch_timers_present & mask) != mask) {
- if (of_find_matching_node(NULL, arch_timer_mem_of_match) &&
- !(arch_timers_present & ARCH_MEM_TIMER))
+ if (!arch_timer_probed(ARCH_MEM_TIMER, arch_timer_mem_of_match))
return;
- if (of_find_matching_node(NULL, arch_timer_of_match) &&
- !(arch_timers_present & ARCH_CP15_TIMER))
+ if (!arch_timer_probed(ARCH_CP15_TIMER, arch_timer_of_match))
return;
}

diff --git a/drivers/clocksource/cadence_ttc_timer.c b/drivers/clocksource/cadence_ttc_timer.c
index 7a08811df9aa..510c8a1d37b3 100644
--- a/drivers/clocksource/cadence_ttc_timer.c
+++ b/drivers/clocksource/cadence_ttc_timer.c
@@ -25,7 +25,7 @@
#include <linux/sched_clock.h>

/*
- * This driver configures the 2 16-bit count-up timers as follows:
+ * This driver configures the 2 16/32-bit count-up timers as follows:
*
* T1: Timer 1, clocksource for generic timekeeping
* T2: Timer 2, clockevent source for hrtimers
@@ -321,7 +321,8 @@ static int ttc_rate_change_clocksource_cb(struct notifier_block *nb,
return NOTIFY_DONE;
}

-static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base)
+static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base,
+ u32 timer_width)
{
struct ttc_timer_clocksource *ttccs;
int err;
@@ -351,7 +352,7 @@ static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base)
ttccs->cs.name = "ttc_clocksource";
ttccs->cs.rating = 200;
ttccs->cs.read = __ttc_clocksource_read;
- ttccs->cs.mask = CLOCKSOURCE_MASK(16);
+ ttccs->cs.mask = CLOCKSOURCE_MASK(timer_width);
ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;

/*
@@ -372,7 +373,8 @@ static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base)
}

ttc_sched_clock_val_reg = base + TTC_COUNT_VAL_OFFSET;
- sched_clock_register(ttc_sched_clock_read, 16, ttccs->ttc.freq / PRESCALE);
+ sched_clock_register(ttc_sched_clock_read, timer_width,
+ ttccs->ttc.freq / PRESCALE);
}

static int ttc_rate_change_clockevent_cb(struct notifier_block *nb,
@@ -467,6 +469,7 @@ static void __init ttc_timer_init(struct device_node *timer)
struct clk *clk_cs, *clk_ce;
static int initialized;
int clksel;
+ u32 timer_width = 16;

if (initialized)
return;
@@ -490,6 +493,8 @@ static void __init ttc_timer_init(struct device_node *timer)
BUG();
}

+ of_property_read_u32(timer, "timer-width", &timer_width);
+
clksel = readl_relaxed(timer_baseaddr + TTC_CLK_CNTRL_OFFSET);
clksel = !!(clksel & TTC_CLK_CNTRL_CSRC_MASK);
clk_cs = of_clk_get(timer, clksel);
@@ -506,7 +511,7 @@ static void __init ttc_timer_init(struct device_node *timer)
BUG();
}

- ttc_setup_clocksource(clk_cs, timer_baseaddr);
+ ttc_setup_clocksource(clk_cs, timer_baseaddr, timer_width);
ttc_setup_clockevent(clk_ce, timer_baseaddr + 4, irq);

pr_info("%s #0 at %p, irq=%d\n", timer->name, timer_baseaddr, irq);
diff --git a/drivers/clocksource/meson6_timer.c b/drivers/clocksource/meson6_timer.c
new file mode 100644
index 000000000000..5c15cba41dca
--- /dev/null
+++ b/drivers/clocksource/meson6_timer.c
@@ -0,0 +1,167 @@
+/*
+ * Amlogic Meson6 SoCs timer handling.
+ *
+ * Copyright (C) 2014 Carlo Caione <carlo@caione.org>
+ *
+ * Based on code from Amlogic, Inc
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqreturn.h>
+#include <linux/sched_clock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define CED_ID 0
+#define CSD_ID 4
+
+#define TIMER_ISA_MUX 0
+#define TIMER_ISA_VAL(t) (((t) + 1) << 2)
+
+#define TIMER_INPUT_BIT(t) (2 * (t))
+#define TIMER_ENABLE_BIT(t) (16 + (t))
+#define TIMER_PERIODIC_BIT(t) (12 + (t))
+
+#define TIMER_CED_INPUT_MASK (3UL << TIMER_INPUT_BIT(CED_ID))
+#define TIMER_CSD_INPUT_MASK (7UL << TIMER_INPUT_BIT(CSD_ID))
+
+#define TIMER_CED_UNIT_1US 0
+#define TIMER_CSD_UNIT_1US 1
+
+static void __iomem *timer_base;
+
+static u64 notrace meson6_timer_sched_read(void)
+{
+ return (u64)readl(timer_base + TIMER_ISA_VAL(CSD_ID));
+}
+
+static void meson6_clkevt_time_stop(unsigned char timer)
+{
+ u32 val = readl(timer_base + TIMER_ISA_MUX);
+
+ writel(val & ~TIMER_ENABLE_BIT(timer), timer_base + TIMER_ISA_MUX);
+}
+
+static void meson6_clkevt_time_setup(unsigned char timer, unsigned long delay)
+{
+ writel(delay, timer_base + TIMER_ISA_VAL(timer));
+}
+
+static void meson6_clkevt_time_start(unsigned char timer, bool periodic)
+{
+ u32 val = readl(timer_base + TIMER_ISA_MUX);
+
+ if (periodic)
+ val |= TIMER_PERIODIC_BIT(timer);
+ else
+ val &= ~TIMER_PERIODIC_BIT(timer);
+
+ writel(val | TIMER_ENABLE_BIT(timer), timer_base + TIMER_ISA_MUX);
+}
+
+static void meson6_clkevt_mode(enum clock_event_mode mode,
+ struct clock_event_device *clk)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ meson6_clkevt_time_stop(CED_ID);
+ meson6_clkevt_time_setup(CED_ID, USEC_PER_SEC/HZ - 1);
+ meson6_clkevt_time_start(CED_ID, true);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ meson6_clkevt_time_stop(CED_ID);
+ meson6_clkevt_time_start(CED_ID, false);
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ default:
+ meson6_clkevt_time_stop(CED_ID);
+ break;
+ }
+}
+
+static int meson6_clkevt_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ meson6_clkevt_time_stop(CED_ID);
+ meson6_clkevt_time_setup(CED_ID, evt);
+ meson6_clkevt_time_start(CED_ID, false);
+
+ return 0;
+}
+
+static struct clock_event_device meson6_clockevent = {
+ .name = "meson6_tick",
+ .rating = 400,
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_mode = meson6_clkevt_mode,
+ .set_next_event = meson6_clkevt_next_event,
+};
+
+static irqreturn_t meson6_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = (struct clock_event_device *)dev_id;
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction meson6_timer_irq = {
+ .name = "meson6_timer",
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = meson6_timer_interrupt,
+ .dev_id = &meson6_clockevent,
+};
+
+static void __init meson6_timer_init(struct device_node *node)
+{
+ u32 val;
+ int ret, irq;
+
+ timer_base = of_io_request_and_map(node, 0, "meson6-timer");
+ if (IS_ERR(timer_base))
+ panic("Can't map registers");
+
+ irq = irq_of_parse_and_map(node, 0);
+ if (irq <= 0)
+ panic("Can't parse IRQ");
+
+ /* Set 1us for timer E */
+ val = readl(timer_base + TIMER_ISA_MUX);
+ val &= ~TIMER_CSD_INPUT_MASK;
+ val |= TIMER_CSD_UNIT_1US << TIMER_INPUT_BIT(CSD_ID);
+ writel(val, timer_base + TIMER_ISA_MUX);
+
+ sched_clock_register(meson6_timer_sched_read, 32, USEC_PER_SEC);
+ clocksource_mmio_init(timer_base + TIMER_ISA_VAL(CSD_ID), node->name,
+ 1000 * 1000, 300, 32, clocksource_mmio_readl_up);
+
+ /* Timer A base 1us */
+ val &= ~TIMER_CED_INPUT_MASK;
+ val |= TIMER_CED_UNIT_1US << TIMER_INPUT_BIT(CED_ID);
+ writel(val, timer_base + TIMER_ISA_MUX);
+
+ /* Stop the timer A */
+ meson6_clkevt_time_stop(CED_ID);
+
+ ret = setup_irq(irq, &meson6_timer_irq);
+ if (ret)
+ pr_warn("failed to setup irq %d\n", irq);
+
+ meson6_clockevent.cpumask = cpu_possible_mask;
+ meson6_clockevent.irq = irq;
+
+ clockevents_config_and_register(&meson6_clockevent, USEC_PER_SEC,
+ 1, 0xfffe);
+}
+CLOCKSOURCE_OF_DECLARE(meson6, "amlogic,meson6-timer",
+ meson6_timer_init);
diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
index a8d7ea14f183..c0b56ea2ddf6 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/tcb_clksrc.c
@@ -178,12 +178,6 @@ static irqreturn_t ch2_irq(int irq, void *handle)
return IRQ_NONE;
}

-static struct irqaction tc_irqaction = {
- .name = "tc_clkevt",
- .flags = IRQF_TIMER,
- .handler = ch2_irq,
-};
-
static int __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
{
int ret;
@@ -198,15 +192,16 @@ static int __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)

clkevt.regs = tc->regs;
clkevt.clk = t2_clk;
- tc_irqaction.dev_id = &clkevt;

timer_clock = clk32k_divisor_idx;

clkevt.clkevt.cpumask = cpumask_of(0);

- ret = setup_irq(irq, &tc_irqaction);
- if (ret)
+ ret = request_irq(irq, ch2_irq, IRQF_TIMER, "tc_clkevt", &clkevt);
+ if (ret) {
+ clk_disable_unprepare(t2_clk);
return ret;
+ }

clockevents_config_and_register(&clkevt.clkevt, 32768, 1, 0xffff);

diff --git a/drivers/clocksource/timer-marco.c b/drivers/clocksource/timer-marco.c
index 330e93064692..caf7a2030461 100644
--- a/drivers/clocksource/timer-marco.c
+++ b/drivers/clocksource/timer-marco.c
@@ -63,7 +63,7 @@ static inline void sirfsoc_timer_count_disable(int idx)
/* enable count and interrupt */
static inline void sirfsoc_timer_count_enable(int idx)
{
- writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx) | 0x7,
+ writel_relaxed(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx) | 0x3,
sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL + 4 * idx);
}

@@ -103,6 +103,9 @@ static int sirfsoc_timer_set_next_event(unsigned long delta,
{
int cpu = smp_processor_id();

+ /* disable timer first, then modify the related registers */
+ sirfsoc_timer_count_disable(cpu);
+
writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_0 +
4 * cpu);
writel_relaxed(delta, sirfsoc_timer_base + SIRFSOC_TIMER_MATCH_0 +
diff --git a/drivers/clocksource/vf_pit_timer.c b/drivers/clocksource/vf_pit_timer.c
index a918bc481c52..b45ac6229b57 100644
--- a/drivers/clocksource/vf_pit_timer.c
+++ b/drivers/clocksource/vf_pit_timer.c
@@ -93,6 +93,10 @@ static void pit_set_mode(enum clock_event_mode mode,
case CLOCK_EVT_MODE_PERIODIC:
pit_set_next_event(cycle_per_jiffy, evt);
break;
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ pit_timer_disable();
+ break;
default:
break;
}
diff --git a/fs/timerfd.c b/fs/timerfd.c
index 80c350216ea8..b46ffa94372a 100644
--- a/fs/timerfd.c
+++ b/fs/timerfd.c
@@ -333,8 +333,7 @@ static long timerfd_ioctl(struct file *file, unsigned int cmd, unsigned long arg
spin_lock_irq(&ctx->wqh.lock);
if (!timerfd_canceled(ctx)) {
ctx->ticks = ticks;
- if (ticks)
- wake_up_locked(&ctx->wqh);
+ wake_up_locked(&ctx->wqh);
} else
ret = -ECANCELED;
spin_unlock_irq(&ctx->wqh.lock);
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 99aa6ee3908f..cc0a5b6f741b 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -968,6 +968,10 @@ static void tick_nohz_handler(struct clock_event_device *dev)
tick_sched_do_timer(now);
tick_sched_handle(ts, regs);

+ /* No need to reprogram if we are running tickless */
+ if (unlikely(ts->tick_stopped))
+ return;
+
while (tick_nohz_reprogram(ts, now)) {
now = ktime_get();
tick_do_update_jiffies64(now);
@@ -1095,6 +1099,10 @@ static enum hrtimer_restart tick_sched_timer(struct hrtimer *timer)
if (regs)
tick_sched_handle(ts, regs);

+ /* No need to reprogram if we are in idle or full dynticks mode */
+ if (unlikely(ts->tick_stopped))
+ return HRTIMER_NORESTART;
+
hrtimer_forward(timer, now, tick_period);

return HRTIMER_RESTART;

\
 
 \ /
  Last update: 2014-10-08 20:42    [W:0.113 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site