lkml.org 
[lkml]   [2014]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/6] ARM: cygnus: Initial support for Broadcom Cygnus SoC
On Wed, Oct 8, 2014 at 12:27 AM, Scott Branden <sbranden@broadcom.com> wrote:
> From: Jonathan Richardson <jonathar@broadcom.com>
>
> Adds initial support for the Cygnus SoC based on Broadcom’s iProc series.
>
> Reviewed-by: Ray Jui <rjui@broadcom.com>
> Reviewed-by: Desmond Liu <desmondl@broadcom.com>
> Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com>
> Tested-by: Jonathan Richardson <jonathar@broadcom.com>
> Signed-off-by: Scott Branden <sbranden@broadcom.com>
> ---
> arch/arm/mach-bcm/Kconfig | 31 ++++++++
> arch/arm/mach-bcm/Makefile | 3 +
> arch/arm/mach-bcm/bcm_cygnus.c | 166 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 200 insertions(+)
> create mode 100644 arch/arm/mach-bcm/bcm_cygnus.c
>
> diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
> index fc93800..2dd3f78 100644
> --- a/arch/arm/mach-bcm/Kconfig
> +++ b/arch/arm/mach-bcm/Kconfig
> @@ -5,6 +5,37 @@ menuconfig ARCH_BCM
>
> if ARCH_BCM
>
> +config ARCH_BCM_IPROC
> + bool "Broadcom ARMv7 iProc boards" if ARCH_MULTI_V7
> + select ARM_GIC
> + select CACHE_L2X0
> + select HAVE_ARM_TWD if LOCAL_TIMERS

LOCAL_TIMERS does not exist anymore.

> + select HAVE_CLK

Selected already by multi-platform.

> + select CLKSRC_OF
> + select CLKSRC_MMIO

These should be selected by the timers that need these rather than the platform.

> + select GENERIC_CLOCKEVENTS

Selected already by multi-platform.

> + select ARM_GLOBAL_TIMER
> + select ARCH_REQUIRE_GPIOLIB
> + select ARM_AMBA
> + select PINCTRL
> + select DEBUG_UART_8250

This entry should not be a select. It will break multi-platform.

Sort the select entries alphabetically.

> + help
> + This enables support for systems based on Broadcom IPROC architected SoCs.
> + The IPROC complex contains one or more ARM CPUs along with common
> + core periperals. Application specific SoCs are created by adding a
> + uArchitecture containing peripherals outside of the IPROC complex.
> + Currently supported SoCs are Cygnus.
> +
> +menu "iProc SoC based Machine types"
> + depends on ARCH_BCM_IPROC
> +
> + config ARCH_BCM_CYGNUS
> + bool "Support Broadcom Cygnus board"
> + select USB_ARCH_HAS_EHCI if USB_SUPPORT
> + help
> + Support for Broadcom Cygnus SoC.
> +endmenu
> +
> config ARCH_BCM_MOBILE
> bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7
> select ARCH_REQUIRE_GPIOLIB
> diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
> index b19a396..46e092a 100644
> --- a/arch/arm/mach-bcm/Makefile
> +++ b/arch/arm/mach-bcm/Makefile
> @@ -10,6 +10,9 @@
> # of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> # GNU General Public License for more details.
>
> +# Cygnus
> +obj-$(CONFIG_ARCH_BCM_CYGNUS) += bcm_cygnus.o
> +
> # BCM281XX
> obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o
>
> diff --git a/arch/arm/mach-bcm/bcm_cygnus.c b/arch/arm/mach-bcm/bcm_cygnus.c
> new file mode 100644
> index 0000000..8e430ed
> --- /dev/null
> +++ b/arch/arm/mach-bcm/bcm_cygnus.c
> @@ -0,0 +1,166 @@
> +/*
> + * Copyright 2014 Broadcom Corporation. All rights reserved.
> + *
> + * Unless you and Broadcom execute a separate written software license
> + * agreement governing use of this software, this software is licensed to you
> + * under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/clocksource.h>
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <asm/mach/arch.h>
> +#include <asm/mach/map.h>
> +#include <asm/proc-fns.h>
> +#include <asm/hardware/cache-l2x0.h>
> +
> +#define CRMU_MAIL_BOX1 0x03024028
> +#define CRMU_SOFT_RESET_CMD 0xFFFFFFFF
> +
> +/* CRU_RESET register */
> +static void * __iomem crmu_mail_box1_reg;
> +
> +#ifdef CONFIG_NEON
> +
> +#define CRU_BASE 0x1800e000
> +#define CRU_SIZE 0x34
> +#define CRU_CONTROL_OFFSET 0x0
> +#define CRU_PWRDWN_EN_OFFSET 0x4
> +#define CRU_PWRDWN_STATUS_OFFSET 0x8
> +#define CRU_NEON0_HW_RESET 6
> +#define CRU_CLAMP_ON_NEON0 20
> +#define CRU_PWRONIN_NEON0 21
> +#define CRU_PWRONOUT_NEON0 21
> +#define CRU_PWROKIN_NEON0 22
> +#define CRU_PWROKOUT_NEON0 22
> +#define CRU_STATUS_DELAY_NS 500
> +#define CRU_MAX_RETRY_COUNT 10
> +#define CRU_RETRY_INTVL_US 1
> +
> +/* Power up the NEON/VFPv3 block. */
> +static void bcm_cygnus_powerup_neon(void)
> +{
> + void * __iomem cru_base = ioremap(CRU_BASE, CRU_SIZE);
> + u32 reg, i;
> +
> + if (WARN_ON(!cru_base))
> + return;
> +
> + /* De-assert the neon hardware block reset */
> + reg = readl(cru_base + CRU_CONTROL_OFFSET);
> + reg &= ~(1 << CRU_NEON0_HW_RESET);
> + writel(reg, cru_base + CRU_CONTROL_OFFSET);
> +
> + /* Assert the power ON register bit */
> + reg = readl(cru_base + CRU_PWRDWN_EN_OFFSET);
> + reg |= (1 << CRU_PWRONIN_NEON0);
> + writel(reg, cru_base + CRU_PWRDWN_EN_OFFSET);
> +
> + /*
> + * Wait up to 10 usec in 1 usec increments for the
> + * status register to acknowledge the power ON assert
> + */
> + for (i = 0; i < CRU_MAX_RETRY_COUNT; i++) {
> + reg = readl(cru_base + CRU_PWRDWN_STATUS_OFFSET);
> + if (reg & CRU_PWRONOUT_NEON0)
> + break;
> +
> + udelay(CRU_RETRY_INTVL_US);
> + }
> +
> + if (WARN_ON(i == CRU_MAX_RETRY_COUNT))
> + goto neon_unmap;
> +
> + /* Wait 0.5 usec = 500 nsec */
> + ndelay(CRU_STATUS_DELAY_NS);
> +
> + /* Assert the power OK register bit */
> + reg = readl(cru_base + CRU_PWRDWN_EN_OFFSET);
> + reg |= (1 << CRU_PWROKIN_NEON0);
> + writel(reg, cru_base + CRU_PWRDWN_EN_OFFSET);
> +
> + /*
> + * Wait up to 10 usec in 1 usec increments for the
> + * status register to acknowledge the power OK assert
> + */
> + for (i = 0; i < CRU_MAX_RETRY_COUNT; i++) {
> + reg = readl(cru_base + CRU_PWRDWN_STATUS_OFFSET);
> + if (reg & CRU_PWROKOUT_NEON0)
> + break;
> +
> + udelay(CRU_RETRY_INTVL_US);
> + }
> +
> + if (WARN_ON(i == CRU_MAX_RETRY_COUNT))
> + goto neon_unmap;
> +
> + /* Wait 0.5 usec = 500 nsec */
> + ndelay(CRU_STATUS_DELAY_NS);
> +
> + /* Set the logic clamp for the neon block */
> + reg = readl(cru_base + CRU_PWRDWN_EN_OFFSET);
> + reg &= ~(1 << CRU_CLAMP_ON_NEON0);
> + writel(reg, cru_base + CRU_PWRDWN_EN_OFFSET);
> +
> + /* Wait 0.5 usec = 500 nsec */
> + ndelay(CRU_STATUS_DELAY_NS);
> +
> + /* Reset the neon hardware block */
> + reg = readl(cru_base + CRU_CONTROL_OFFSET);
> + reg |= (1 << CRU_NEON0_HW_RESET);
> + writel(reg, cru_base + CRU_CONTROL_OFFSET);
> +
> +neon_unmap:
> + iounmap(cru_base);
> +}
> +#endif /* CONFIG_NEON */

Is this a single core chip? If not, it seems like all this would
change when you add SMP support.

Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-10-08 15:41    [W:0.098 / U:0.664 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site