lkml.org 
[lkml]   [2014]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] net: fec: fix regression on i.MX28 introduced by rx_copybreak support
Hi,

David Laight wrote:
> From: Lothar Waßmann
> > David Laight wrote:
> > > From: Eric Dumazet
> > > > On Tue, 2014-10-07 at 15:19 +0200, Lothar Wamann wrote:
> > > > > commit 1b7bde6d659d ("net: fec: implement rx_copybreak to improve rx performance")
> > > > > introduced a regression for i.MX28. The swap_buffer() function doing
> > > > > the endian conversion of the received data on i.MX28 may access memory
> > > > > beyond the actual packet size in the DMA buffer. fec_enet_copybreak()
> > > > > does not copy those bytes, so that the last bytes of a packet may be
> > > > > filled with invalid data after swapping.
> > > > > This will likely lead to checksum errors on received packets.
> > > > > E.g. when trying to mount an NFS rootfs:
> > > > > UDP: bad checksum. From 192.168.1.225:111 to 192.168.100.73:44662 ulen 36
> > > > >
> > > > > Do the byte swapping and copying to the new skb in one go if
> > > > > necessary.
> > > > >
> > > > > Signed-off-by: Lothar Wamann <LW@KARO-electronics.de>
> > > > > ---
> > > > > drivers/net/ethernet/freescale/fec_main.c | 25 +++++++++++++++++++++----
> > > > > 1 file changed, 21 insertions(+), 4 deletions(-)
> > > > >
> > > > > diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
> > > > > index 87975b5..eaaebad 100644
> > > > > --- a/drivers/net/ethernet/freescale/fec_main.c
> > > > > +++ b/drivers/net/ethernet/freescale/fec_main.c
> > > > > @@ -339,6 +339,18 @@ static void *swap_buffer(void *bufaddr, int len)
> > > > > return bufaddr;
> > > > > }
> > > > >
> > > > > +static void *swap_buffer2(void *dst_buf, void *src_buf, int len)
> > > > > +{
> > > > > + int i;
> > > > > + unsigned int *src = src_buf;
> > > > > + unsigned int *dst = dst_buf;
> > > > > +
> > > > > + for (i = 0; i < DIV_ROUND_UP(len, 4); i++, src++, dst++)
> > > > > + *dst = cpu_to_be32(*src);
> > > >
> > > > No need for the DIV :
> > > >
> > > > for (i = 0; i < len; i += sizeof(*dst), src++, dst++)
> > > > *dst = cpu_to_be32(*src);
> > > >
> > > > Also are you sure both src/dst are aligned to word boundaries, or is
> > > > this architecture OK with possible misalignment ?
> > >
> > > I wondered about that as well.
> > > I wouldn't have expected ppc to support misaligned transfers, and you'd also
> > > want to make sure that cpu_to_be(*src) was using a byte-swapping instruction.
> > > Hmmm... cpu_to_be() doesn't sound like the right 'swap' macro name.
> > >
> > ??? So what is cpu_to_be32() then?
> > The new swap function is an exact copy of the original one already in
> > use except for the fact that it uses distinct source and destination
> > buffers.
>
> cpu_to_be32() is for converting a 'cpu' endianness value to 'big-endian'.
> Here you are processing receive data - so you probably want be32_to_cpu().
> (Yes, I know they are functionally identical....)
>
> Alternatively, since these aren't actually 32bit numbers and you know
> whether you want to swap, something like the __swab32p() from swab.h
> - but I'm not entirely sure that one is expected to be used.
>
OK, but that should probably be a separate patch to fix the original
swap_buffer() function as well.

> Clearly you are well inside the ppc 'endianness' hell.
>
No. i.MX28 is not PPC. It only has a "feature" in the ethernet
controller that stores all data in big endian format.


Lothar Waßmann
--
___________________________________________________________

Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info@karo-electronics.de
___________________________________________________________
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-10-08 11:41    [W:0.047 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site