Messages in this thread Patch in this message | | | From | Feng Kan <> | Subject | [PATCH 2/6] Documentation: mailbox: Add APM X-Gene SLIMpro mailbox dts documentation | Date | Tue, 7 Oct 2014 17:06:45 -0700 |
| |
This adds the APM X-Gene SLIMpro mailbox device tree node documentation.
Signed-off-by: Feng Kan <fkan@apm.com> --- .../bindings/mailbox/xgene-slimpro-mailbox.txt | 41 ++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt
diff --git a/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt new file mode 100644 index 0000000..d0b74fb --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt @@ -0,0 +1,41 @@ +The APM X-Gene SLIMpro mailbox driver is used to communicate messages between +the ARM64 processors and the Cortex M3 (dubbed SLIMpro). It uses a simple +interrupt based door bell mechanism and can exchange simple messages using the +internal registers. + +There are total of 8 interrupts in this mailbox. Each used for an individual +door bell (or mailbox channel). + +Required properties: +- compatible: Should be as "apm, xgene-slimpro-mbox". + +- reg: Contain the mailbox register address range. + +- interrupts: Contain interrupt information for the mailbox device. + +- #mbox-cells: Specify the number of parameters used by the mailbox client. + Currently only one to specify the mailbox channel number. + +Example: + +Mailbox Node: + slimpro-mbox: slimpro-mbox@10540000 { + compatible = "apm,xgene-slimpro-mbox"; + reg = <0x0 0x10540000 0x0 0xa000>; + #mbox-cells = <1>; + interrupts = <0x0 0x0 0x4>, + <0x0 0x1 0x4>, + <0x0 0x2 0x4>, + <0x0 0x3 0x4>, + <0x0 0x4 0x4>, + <0x0 0x5 0x4>, + <0x0 0x6 0x4>, + <0x0 0x7 0x4>; + }; + +Client Node: + i2c-slimpro { + compatible = "apm,xgene-slimpro-i2c"; + mbox = <&slimpro-mbox 0>; + mbox-names = "i2c-slimpro"; + }; -- 1.9.1
| |