lkml.org 
[lkml]   [2014]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 3/4] ARM: tegra: Add thermal trip points for Jetson TK1
On Fri, Oct 03, 2014 at 09:57:24PM +0200, Pavel Machek wrote:
> On Wed 2014-09-24 14:32:06, Eduardo Valentin wrote:
> > Hello Mikko,
> >
> > On Thu, Aug 21, 2014 at 01:17:21PM +0300, Mikko Perttunen wrote:
> > > This adds critical trip points to the Jetson TK1 device tree.
> > > The device will do a controlled shutdown when either the CPU, GPU
> > > or MEM thermal zone reaches 101 degrees Celsius.
>
> > > + trips {
> > > + trip@0 {
> > > + temperature = <101000>;
> > > + hysteresis = <0>;
> > > + type = "critical";
> > > + };
>
> Would it be still time to switch to some more reasonable unit, like
> degrees celsius? milicelsius is a bit of overkill.. ACPI uses
> deciCelsius, but .. celsius should be enough.
>

We should be using deciKelvin then.

Cheers,

Peter.


\
 
 \ /
  Last update: 2014-10-06 10:02    [W:0.114 / U:1.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site