lkml.org 
[lkml]   [2014]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v2 01/15] virtio_pci: fix virtio spec compliance on restore
On restore, virtio pci does the following:
+ set features
+ init vqs etc - device can be used at this point!
+ set ACKNOWLEDGE,DRIVER and DRIVER_OK status bits

This is in violation of the virtio spec, which
requires the following order:
- ACKNOWLEDGE
- DRIVER
- init vqs
- DRIVER_OK

This behaviour will break with hypervisors that assume spec compliant
behaviour. It seems like a good idea to have this patch applied to
stable branches to reduce the support butden for the hypervisors.

Cc: stable@vger.kernel.org
Cc: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
drivers/virtio/virtio_pci.c | 36 ++++++++++++++++++++++++++++++++----
1 file changed, 32 insertions(+), 4 deletions(-)

diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 3d1463c..0f2db51 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -789,6 +789,7 @@ static int virtio_pci_restore(struct device *dev)
struct pci_dev *pci_dev = to_pci_dev(dev);
struct virtio_pci_device *vp_dev = pci_get_drvdata(pci_dev);
struct virtio_driver *drv;
+ unsigned status = 0;
int ret;

drv = container_of(vp_dev->vdev.dev.driver,
@@ -799,14 +800,41 @@ static int virtio_pci_restore(struct device *dev)
return ret;

pci_set_master(pci_dev);
+ /* We always start by resetting the device, in case a previous
+ * driver messed it up. */
+ vp_reset(&vp_dev->vdev);
+
+ /* Acknowledge that we've seen the device. */
+ status |= VIRTIO_CONFIG_S_ACKNOWLEDGE;
+ vp_set_status(&vp_dev->vdev, status);
+
+ /* Maybe driver failed before freeze.
+ * Restore the failed status, for debugging. */
+ status |= vp_dev->saved_status & VIRTIO_CONFIG_S_FAILED;
+ vp_set_status(&vp_dev->vdev, status);
+
+ if (!drv)
+ return 0;
+
+ /* We have a driver! */
+ status |= VIRTIO_CONFIG_S_DRIVER;
+ vp_set_status(&vp_dev->vdev, status);
+
vp_finalize_features(&vp_dev->vdev);

- if (drv && drv->restore)
- ret = drv->restore(&vp_dev->vdev);
+ if (!drv->restore)
+ return 0;
+
+ ret = drv->restore(&vp_dev->vdev);
+ if (ret) {
+ status |= VIRTIO_CONFIG_S_FAILED;
+ vp_set_status(&vp_dev->vdev, status);
+ return ret;
+ }

/* Finally, tell the device we're all set */
- if (!ret)
- vp_set_status(&vp_dev->vdev, vp_dev->saved_status);
+ status |= VIRTIO_CONFIG_S_DRIVER_OK;
+ vp_set_status(&vp_dev->vdev, status);

return ret;
}
--
MST


\
 
 \ /
  Last update: 2014-10-06 17:42    [W:0.158 / U:1.784 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site