lkml.org 
[lkml]   [2014]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v7 10/11] ARM: at91/dt: add LCD panel description to sama5d3xdm.dtsi
On Mon, 6 Oct 2014 15:30:59 +0200
Thierry Reding <thierry.reding@gmail.com> wrote:

> On Mon, Oct 06, 2014 at 03:11:11PM +0200, Boris Brezillon wrote:
> > On Mon, 6 Oct 2014 14:40:15 +0200
> > Thierry Reding <thierry.reding@gmail.com> wrote:
> >
> > > On Mon, Oct 06, 2014 at 02:25:38PM +0200, Boris Brezillon wrote:
> > > > On Mon, 6 Oct 2014 13:01:16 +0200 Thierry Reding <thierry.reding@gmail.com> wrote:
> > > > > On Wed, Oct 01, 2014 at 04:53:07PM +0200, Boris Brezillon wrote:
> > > > > [...]
> > > > > > diff --git a/arch/arm/boot/dts/sama5d3xdm.dtsi b/arch/arm/boot/dts/sama5d3xdm.dtsi
> > > [...]
> > > > > > + backlight = <&backlight>;
> > > > > > + power-supply = <&panel_reg>;
> > > > > > + #address-cells = <1>;
> > > > > > + #size-cells = <0>;
> > > > > > + status = "disabled";
> > > > > > +
> > > > > > + port@0 {
> > > > > > + #address-cells = <1>;
> > > > > > + #size-cells = <0>;
> > > > > > +
> > > > > > + panel_input: endpoint@0 {
> > > > > > + reg = <0>;
> > > > > > + remote-endpoint = <&hlcdc_panel_output>;
> > > > > > + };
> > > > > > };
> > > > >
> > > > > There's no support for OF graphs in simple-panel, so this is unused,
> > > > > isn't it?
> > > >
> > > > Actually I use it in my atmel_hlcdc_ouput implementation to figure out
> > > > the link between a panel and a device connected on the RGB/DPI bus.
> > >
> > > That's kind of weird and one of the reasons why I can't make myself like
> > > the OF graph bindings. It requires drivers for one device to reach into
> > > the device tree node of some other device and look for content. Or put
> > > another way, a DT node for a panel that works on one platform doesn't
> > > work on another because the display controller needs additional DT
> > > content that isn't required by the original binding for the panel.
> >
> > I also have a working POC of a DPI bus implementation (with DPI support
> > in panel-simple driver).
> >
> > This is a solution I developed to provide a generic DPI implementation
> > in my HLCDC driver and rely on generic external implementations for
> > slave devices (panels, encoders, ...).
> >
> > But, IIRC, Laurent was not in favor of a bus approach because the DPI
> > bus is just a data bus and not a control bus.
> >
> > Anyway, I'll clean it up and post an RFC.
>
> According to the MIPI website there are also control signals and a
> command set to control display behaviour. Does your implementation
> handle any of that?

No it doesn't, and I'm pretty sure what I call DPI does not exactly
respect the MIPI DPI standard (and as such should not be called DPI,
but this is another problem).

This infrastructure provides a way for devices connected on a DPI bus
to agree on a video_bus_format (in my case RGB888, RGB666, ...).

--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com


\
 
 \ /
  Last update: 2014-10-06 16:42    [W:0.108 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site