lkml.org 
[lkml]   [2014]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] ARM: zynq: Extend SLCR driver to read OCM configuration
Date
Get OCM configuration from SLCR.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

arch/arm/mach-zynq/slcr.c | 15 +++++++++++++++
include/soc/zynq/common.h | 1 +
2 files changed, 16 insertions(+)

diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c
index cb7c46165728..0c3e45090c09 100644
--- a/arch/arm/mach-zynq/slcr.c
+++ b/arch/arm/mach-zynq/slcr.c
@@ -27,6 +27,7 @@
#define SLCR_A9_CPU_RST_CTRL_OFFSET 0x244 /* CPU Software Reset Control */
#define SLCR_REBOOT_STATUS_OFFSET 0x258 /* PS Reboot Status */
#define SLCR_PSS_IDCODE 0x530 /* PS IDCODE */
+#define SLCR_OCM_CFG_OFFSET 0x910 /* OCM Address Mapping */

#define SLCR_UNLOCK_MAGIC 0xDF0D
#define SLCR_A9_CPU_CLKSTOP 0x10
@@ -126,6 +127,20 @@ void zynq_slcr_system_reset(void)
}

/**
+ * zynq_slcr_get_ocm_config - Get SLCR OCM config
+ *
+ * Return: OCM config bits
+ */
+u32 zynq_slcr_get_ocm_config(void)
+{
+ u32 val;
+
+ zynq_slcr_read(&val, SLCR_OCM_CFG_OFFSET);
+
+ return val;
+}
+
+/**
* zynq_slcr_cpu_start - Start cpu
* @cpu: cpu number
*/
diff --git a/include/soc/zynq/common.h b/include/soc/zynq/common.h
index f652f0a884a6..fc6b1ed37455 100644
--- a/include/soc/zynq/common.h
+++ b/include/soc/zynq/common.h
@@ -25,6 +25,7 @@ extern void zynq_slcr_system_reset(void);
extern void zynq_slcr_cpu_stop(int cpu);
extern void zynq_slcr_cpu_start(int cpu);
extern u32 zynq_slcr_get_device_id(void);
+extern u32 zynq_slcr_get_ocm_config(void);

#ifdef CONFIG_SMP
extern void secondary_startup(void);
--
1.8.2.3
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-10-06 14:21    [W:0.089 / U:0.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site