lkml.org 
[lkml]   [2014]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: uas: module not loaded automatically
Hi,

On 10/05/2014 11:31 AM, Jan Kiszka wrote:
> On 2014-10-05 11:23, Hans de Goede wrote:
>> Hi,
>>
>> On 10/05/2014 11:14 AM, Jan Kiszka wrote:
>>> On 2014-10-05 11:08, Hans de Goede wrote:
>>>> Hi,
>>>>
>>>> On 10/04/2014 08:35 PM, Jan Kiszka wrote:
>>>>> Hi,
>>>>>
>>>>> my Delock external USB drive stopped working after updating from a
>>>>> UAS-disabled distro kernel to latest 3.17-rc7 with UAS on. That UAS was
>>>>> key became clear to me only after looking at storage_probe(): the device
>>>>> is ignored by usb-storage if it is UAS-capable. However, nothing causes
>>>>> uas.ko to be loaded when the drive is plugged here. How is this supposed
>>>>> to work in the normal case?
>>>>
>>>> Is the uas.ko module installed, and was depmod run after installing it ?
>>>
>>> Definitely. Just retried after another depmod -a, and only modprobe uas
>>> made it work.
>>>
>>>>
>>>> uas.c has the following:
>>>>
>>>> { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) },
>>>> { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) },
>>>>
>>>> Which should make it load automatically on your device.
>>>
>>> Should this match with what lsusb -v reports for the device?
>>
>> Yes, and it does, for both alt settings of your device:
>>
>> bInterfaceClass 8 Mass Storage
>> bInterfaceSubClass 6 SCSI
>> bInterfaceProtocol 80 Bulk-Only
>>
>> bInterfaceClass 8 Mass Storage
>> bInterfaceSubClass 6 SCSI
>> bInterfaceProtocol 98
>>
>> Where 98 == USB_PR_UAS, seems you have an quite old lsusb if it does not
>
> It says "007".
>
>> know that though. Could it be the rest of your userspace is old too, and is
>> not smart enough to load all matching drivers, instead only loading the first matching
>> driver (which happens to be usb-storage) ?
>
> OpenSUSE 13.1, all updates installed. Which components are involved?
> udev - Version 208? Below is the udevadm monitor output.

Hmm, that is not all that old, I would expect that to work.

Here is how things "work" on my system:

[hans@shalem ~]$ lsmod | grep uas
uas 22414 0
usb_storage 65065 1 uas
[hans@shalem ~]$ sudo rmmod uas
[hans@shalem ~]$ lsmod | grep uas
[hans@shalem ~]$ sudo modprobe usb:v174Cp5136d0100dc00dsc00dp00ic08isc06ip50in00
[hans@shalem ~]$ lsmod | grep uas
uas 22414 0
usb_storage 65065 1 uas

So as you can see the modalias taken from your udev debug output causes
uas to get loaded, can you try the above ?

Also what does "modinfo uas" say? For me it says:

[hans@shalem ~]$ modinfo uas
filename: /lib/modules/3.17.0-rc6+/kernel/drivers/usb/storage/uas.ko
author: Hans de Goede <hdegoede@redhat.com>, Matthew Wilcox and Sarah Sharp
license: GPL
alias: usb:v*p*d*dc*dsc*dp*ic08isc06ip62in*
alias: usb:v*p*d*dc*dsc*dp*ic08isc06ip50in*
alias: usb:v174Cp5106d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v152Dp0567d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BC2pAB20d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BC2p3312d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0BC2p2312d*dc*dsc*dp*ic*isc*ip*in*
depends: usb-storage
vermagic: 3.17.0-rc6+ SMP mod_unload
signer: Magrathea: Glacier signing key
sig_key: 9B:56:00:B2:C4:97:8D:4A:A9:B3:0B:54:32:F7:B7:B2:2F:3E:FB:D8
sig_hashalgo: sha256

Note the alias-es with vendor and product ids are from quirks, and your version
will likely not have these. But the first 2 generic ones should be there, and
match the modalias from the udev output.

Regards,

Hans

> PS: Let me know if I should carry this to a different list.

Maybe, first lets try to pinpoint the cause a bit better.


\
 
 \ /
  Last update: 2014-10-05 12:21    [W:0.064 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site