lkml.org 
[lkml]   [2014]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/4] input: touchscreen: ti_am335x_tsc Interchange touchscreen and ADC steps
Vignesh R schrieb am 27.10.2014 12:08:
> From: Brad Griffis <bgriffis@ti.com>
>
> This patch makes the initial changes required to workaround TSC-false
> pen-up interrupts. It is required to implement these changes in order to
> remove udelay in the TSC interrupt handler and false pen-up events.
> The charge step is to be executed immediately after sampling X+. Hence
> TSC is made to use higher numbered steps (steps 5 to 16 for 5 co-ordinate
> readouts, 4 wire TSC configuration) and ADC to use lower ones. Further
> X co-ordinate readouts must be the last to be sampled, thus co-ordinates
> are sampled in the order Y-Z-X.
>
> Signed-off-by: Brad Griffis <bgriffis@ti.com>
> [vigneshr@ti.com: Ported the patch from v3.12 to v3.18rc2]
> Signed-off-by: Vignesh R <vigneshr@ti.com>
> ---
> drivers/iio/adc/ti_am335x_adc.c | 2 +-
> drivers/input/touchscreen/ti_am335x_tsc.c | 42 ++++++++++++++++++-------------
> 2 files changed, 25 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
> index b730864731e8..3f530ed6bd80 100644
> --- a/drivers/iio/adc/ti_am335x_adc.c
> +++ b/drivers/iio/adc/ti_am335x_adc.c
> @@ -98,7 +98,7 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
> * needs to be given to ADC to digitalize data.
> */
>
> - steps = TOTAL_STEPS - adc_dev->channels;
> + steps = 0;
You could even initialize it with zero during variable definition. And I think the above comment could need an update now.
> if (iio_buffer_enabled(indio_dev))
> stepconfig = STEPCONFIG_AVG_16 | STEPCONFIG_FIFO1
> | STEPCONFIG_MODE_SWCNT;
> diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
> index 2ce649520fe0..1aeac9675fe7 100644
> --- a/drivers/input/touchscreen/ti_am335x_tsc.c
> +++ b/drivers/input/touchscreen/ti_am335x_tsc.c
> @@ -121,7 +121,7 @@ static void titsc_step_config(struct titsc *ts_dev)
> {
> unsigned int config;
> int i;
> - int end_step;
> + int end_step, first_step, tsc_steps;
> u32 stepenable;
>
> config = STEPCONFIG_MODE_HWSYNC |
> @@ -140,9 +140,11 @@ static void titsc_step_config(struct titsc *ts_dev)
> break;
> }
>
> - /* 1 … coordinate_readouts is for X */
> - end_step = ts_dev->coordinate_readouts;
> - for (i = 0; i < end_step; i++) {
> + tsc_steps = ts_dev->coordinate_readouts * 2 + 2;
> + first_step = TOTAL_STEPS - tsc_steps;
> + /* Steps 16 to 16-coordinate_readouts is for X */
> + end_step = first_step + tsc_steps;
> + for (i = end_step - ts_dev->coordinate_readouts; i < end_step; i++) {
> titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
> titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
> }
> @@ -164,9 +166,9 @@ static void titsc_step_config(struct titsc *ts_dev)
> break;
> }
>
> - /* coordinate_readouts … coordinate_readouts * 2 is for Y */
> - end_step = ts_dev->coordinate_readouts * 2;
> - for (i = ts_dev->coordinate_readouts; i < end_step; i++) {
> + /* 1 ... coordinate_readouts is for Y */
> + end_step = first_step + ts_dev->coordinate_readouts;
> + for (i = first_step; i < end_step; i++) {
> titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
> titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
> }
> @@ -179,7 +181,7 @@ static void titsc_step_config(struct titsc *ts_dev)
> titsc_writel(ts_dev, REG_CHARGECONFIG, config);
> titsc_writel(ts_dev, REG_CHARGEDELAY, CHARGEDLY_OPENDLY);
>
> - /* coordinate_readouts * 2 … coordinate_readouts * 2 + 2 is for Z */
> + /* coordinate_readouts + 1 ... coordinate_readouts + 2 is for Z */
> config = STEPCONFIG_MODE_HWSYNC |
> STEPCONFIG_AVG_16 | ts_dev->bit_yp |
> ts_dev->bit_xn | STEPCONFIG_INM_ADCREFM |
> @@ -194,8 +196,11 @@ static void titsc_step_config(struct titsc *ts_dev)
> titsc_writel(ts_dev, REG_STEPDELAY(end_step),
> STEPCONFIG_OPENDLY);
>
> - /* The steps1 … end and bit 0 for TS_Charge */
> - stepenable = (1 << (end_step + 2)) - 1;
> + /* The steps end ... end - readouts * 2 + 2 and bit 0 for TS_Charge */
> + stepenable = 1;
> + for (i = 0; i < tsc_steps; i++)
> + stepenable |= 1 << (first_step + i + 1);
> +
> ts_dev->step_mask = stepenable;
> am335x_tsc_se_set_cache(ts_dev->mfd_tscadc, ts_dev->step_mask);
> }
> @@ -209,6 +214,7 @@ static void titsc_read_coordinates(struct titsc *ts_dev,
> unsigned int read, diff;
> unsigned int i, channel;
> unsigned int creads = ts_dev->coordinate_readouts;
> + unsigned int first_step = TOTAL_STEPS - (creads * 2 + 2);
>
> *z1 = *z2 = 0;
> if (fifocount % (creads * 2 + 2))
> @@ -226,7 +232,7 @@ static void titsc_read_coordinates(struct titsc *ts_dev,
>
> channel = (read & 0xf0000) >> 16;
> read &= 0xfff;
> - if (channel < creads) {
> + if (channel > first_step + creads + 2) {
> diff = abs(read - prev_val_x);
> if (diff < prev_diff_x) {
> prev_diff_x = diff;
> @@ -234,19 +240,19 @@ static void titsc_read_coordinates(struct titsc *ts_dev,
> }
> prev_val_x = read;
>
> - } else if (channel < creads * 2) {
> + } else if (channel == first_step + creads + 1) {
> + *z1 = read;
> +
> + } else if (channel == first_step + creads + 2) {
> + *z2 = read;
> +
> + } else if (channel > first_step) {
> diff = abs(read - prev_val_y);
> if (diff < prev_diff_y) {
> prev_diff_y = diff;
> *y = read;
> }
> prev_val_y = read;
> -
> - } else if (channel < creads * 2 + 1) {
> - *z1 = read;
> -
> - } else if (channel < creads * 2 + 2) {
> - *z2 = read;
> }
> }
> }
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-10-31 22:21    [W:0.179 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site