lkml.org 
[lkml]   [2014]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/3] usb: xhci: This reworks ff8cbf250b448aac35589f6075082c3fcad8a8fe
On Fri, 31 Oct 2014, Lu Baolu wrote:

> xhci: clear root port wake on bits if controller isn't wake-up capable
>
> When xHCI PCI host is suspended, if do_wakeup is false in xhci_pci_suspend,
> xhci_pci_suspend needs to clear all root port wake on bits. Otherwise some Intel
> platforms may get a spurious wakeup, even if PCI PME# is disabled.
>
> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
> ---
> drivers/usb/host/xhci-pci.c | 42 ++++++++++++++++++++++++++++++++++++++++++
> drivers/usb/host/xhci.h | 6 ++++++
> 2 files changed, 48 insertions(+)
>
> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> index 280dde9..3e7441a 100644
> --- a/drivers/usb/host/xhci-pci.c
> +++ b/drivers/usb/host/xhci-pci.c
> @@ -27,6 +27,8 @@
> #include "xhci.h"
> #include "xhci-trace.h"
>
> +#define PORT_WAKE_BITS (PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E)
> +
> /* Device for a quirk */
> #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73
> #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000
> @@ -126,6 +128,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
> */
> xhci->quirks |= XHCI_SPURIOUS_REBOOT;
> xhci->quirks |= XHCI_AVOID_BEI;
> + xhci->quirks |= XHCI_DISABLE_PORT_WOB;
> }
> if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
> (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI ||
> @@ -279,6 +282,42 @@ static void xhci_pci_remove(struct pci_dev *dev)
> }
>
> #ifdef CONFIG_PM
> +static void xhci_disable_port_wake_bits(struct xhci_hcd *xhci)
> +{
> + int port_index;
> + __le32 __iomem **port_array;
> + unsigned long flags;
> + u32 t1, t2;
> +
> + spin_lock_irqsave(&xhci->lock, flags);
> +
> + /* disble usb3 ports Wake bits*/
> + port_index = xhci->num_usb3_ports;
> + port_array = xhci->usb3_ports;
> + while (port_index--) {
> + t1 = readl(port_array[port_index]);
> + t2 = xhci_port_state_to_neutral(t1);
> + t2 &= ~PORT_WAKE_BITS;
> + t1 = xhci_port_state_to_neutral(t1);
> + if (t1 != t2)
> + writel(t2, port_array[port_index]);
> + }
> +
> + /* disble usb2 ports Wake bits*/
> + port_index = xhci->num_usb2_ports;
> + port_array = xhci->usb2_ports;
> + while (port_index--) {
> + t1 = readl(port_array[port_index]);
> + t2 = xhci_port_state_to_neutral(t1);
> + t2 &= ~PORT_WAKE_BITS;
> + t1 = xhci_port_state_to_neutral(t1);
> + if (t1 != t2)
> + writel(t2, port_array[port_index]);
> + }
> +
> + spin_unlock_irqrestore(&xhci->lock, flags);
> +}
> +
> static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
> {
> struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> @@ -291,6 +330,9 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
> if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
> pdev->no_d3cold = true;
>
> + if (xhci->quirks & XHCI_DISABLE_PORT_WOB && !do_wakeup)
> + xhci_disable_port_wake_bits(xhci);
> +
> return xhci_suspend(xhci);
> }

There are two things wrong here. First, this should not be a quirk.
The Wake-On bits should be disabled whenever they aren't needed, on
every controller.

Second, this code (or something like it) belongs in xhci.c or
xhci-hub.c, not xhci-pci.c. This is because it should apply to all
xHCI controllers, not just the PCI-based ones.

(In fact, instead of disabling the Wake-On bits when the controller is
suspended and do_wakeup is 0, it probably would be better to leave them
disabled normally and then _enable_ them if do_wakeup is 1.)

Alan Stern



\
 
 \ /
  Last update: 2014-10-31 15:41    [W:0.094 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site