lkml.org 
[lkml]   [2014]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 2/7] wait: Reimplement wait_event_freezable()
Provide better implementations of wait_event_freezable() APIs.

The problem is with freezer_do_not_count(), it hides the thread from
the freezer, even though this thread might not actually freeze/sleep
at all.

Cc: oleg@redhat.com
Cc: Rafael Wysocki <rjw@rjwysocki.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
---
include/linux/freezer.h | 38 --------------------------------
include/linux/wait.h | 56 ++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 56 insertions(+), 38 deletions(-)

--- a/include/linux/freezer.h
+++ b/include/linux/freezer.h
@@ -265,35 +265,6 @@ static inline int freezable_schedule_hrt
__retval; \
})

-#define wait_event_freezable(wq, condition) \
-({ \
- int __retval; \
- freezer_do_not_count(); \
- __retval = wait_event_interruptible(wq, (condition)); \
- freezer_count(); \
- __retval; \
-})
-
-#define wait_event_freezable_timeout(wq, condition, timeout) \
-({ \
- long __retval = timeout; \
- freezer_do_not_count(); \
- __retval = wait_event_interruptible_timeout(wq, (condition), \
- __retval); \
- freezer_count(); \
- __retval; \
-})
-
-#define wait_event_freezable_exclusive(wq, condition) \
-({ \
- int __retval; \
- freezer_do_not_count(); \
- __retval = wait_event_interruptible_exclusive(wq, condition); \
- freezer_count(); \
- __retval; \
-})
-
-
#else /* !CONFIG_FREEZER */
static inline bool frozen(struct task_struct *p) { return false; }
static inline bool freezing(struct task_struct *p) { return false; }
@@ -331,15 +302,6 @@ static inline void set_freezable(void) {
#define freezable_schedule_hrtimeout_range(expires, delta, mode) \
schedule_hrtimeout_range(expires, delta, mode)

-#define wait_event_freezable(wq, condition) \
- wait_event_interruptible(wq, condition)
-
-#define wait_event_freezable_timeout(wq, condition, timeout) \
- wait_event_interruptible_timeout(wq, condition, timeout)
-
-#define wait_event_freezable_exclusive(wq, condition) \
- wait_event_interruptible_exclusive(wq, condition)
-
#define wait_event_freezekillable(wq, condition) \
wait_event_killable(wq, condition)

--- a/include/linux/wait.h
+++ b/include/linux/wait.h
@@ -267,6 +267,30 @@ do { \
__wait_event(wq, condition); \
} while (0)

+#define __wait_event_freezable(wq, condition) \
+ (void)___wait_event(wq, condition, TASK_INTERRUPTIBLE, 0, 0, \
+ schedule(); try_to_freeze())
+
+/**
+ * wait_event - sleep (or freeze) until a condition gets true
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ *
+ * The process is put to sleep (TASK_INTERRUPTIBLE -- so as not to contribute
+ * to system load) until the @condition evaluates to true. The
+ * @condition is checked each time the waitqueue @wq is woken up.
+ *
+ * wake_up() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ */
+#define wait_event_freezable(wq, condition) \
+do { \
+ might_sleep(); \
+ if (condition) \
+ break; \
+ __wait_event_freezable(wq, condition); \
+} while (0)
+
#define __wait_event_timeout(wq, condition, timeout) \
___wait_event(wq, ___wait_cond_timeout(condition), \
TASK_UNINTERRUPTIBLE, 0, timeout, \
@@ -300,6 +324,24 @@ do { \
__ret; \
})

+#define __wait_event_freezable_timeout(wq, condition, timeout) \
+ ___wait_event(wq, ___wait_cond_timeout(condition), \
+ TASK_INTERRUPTIBLE, 0, timeout, \
+ __ret = schedule_timeout(__ret); try_to_freeze())
+
+/*
+ * like wait_event_timeout() -- except it uses TASK_INTERRUPTIBLE to avoid
+ * increasing load and is freezable.
+ */
+#define wait_event_freezable_timeout(wq, condition, timeout) \
+({ \
+ long __ret = timeout; \
+ might_sleep(); \
+ if (!___wait_cond_timeout(condition)) \
+ __ret = __wait_event_freezable_timeout(wq, condition, timeout); \
+ __ret; \
+})
+
#define __wait_event_cmd(wq, condition, cmd1, cmd2) \
(void)___wait_event(wq, condition, TASK_UNINTERRUPTIBLE, 0, 0, \
cmd1; schedule(); cmd2)
@@ -479,6 +521,20 @@ do { \
__ret; \
})

+
+#define __wait_event_freezable_exclusive(wq, condition) \
+ ___wait_event(wq, condition, TASK_INTERRUPTIBLE, 1, 0, \
+ schedule(); try_to_freeze())
+
+#define wait_event_freezable_exclusive(wq, condition) \
+({ \
+ int __ret = 0; \
+ might_sleep(); \
+ if (!(condition)) \
+ __ret = __wait_event_freezable_exclusive(wq, condition);\
+ __ret; \
+})
+

#define __wait_event_interruptible_locked(wq, condition, exclusive, irq) \
({ \



\
 
 \ /
  Last update: 2014-10-31 13:21    [W:0.117 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site