lkml.org 
[lkml]   [2014]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
From
Date
On Thu, 2014-10-30 at 13:38 +0100, Matthias Brugger wrote:
> 2014-10-29 6:37 GMT+01:00 Xudong Chen <xudong.chen@mediatek.com>:
> > Add devicetree bindings for Mediatek Soc I2C driver.
> >
> > Signed-off-by: Xudong Chen <xudong.chen@mediatek.com>
> > ---
> > .../devicetree/bindings/i2c/i2c-mt6577.txt | 37 ++++++++++++++++++++++
> > 1 file changed, 37 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
> >
> > diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
> > new file mode 100644
> > index 0000000..b4012c8
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
> > @@ -0,0 +1,37 @@
> > +* Mediatek's I2C controller
> > +
> > +The Mediatek's I2C controller is used to interface with I2C devices.
> > +
> > +Required properties:
> > + - compatible: value should be either of the following.
> > + (a) "mtk,mt6577-i2c", for i2c compatible with mt6577 i2c.
>
> Looking on the datasheet of mt6577 it does not seem that this driver
> is really compatible.
> I was not able to find the PATH_DIR register neither in the datasheet
> nor in the source code.
>
Hi,

The PATH_DIR register named OFFSET_PATH_DIR(0x60) in the source code.
Only MT8135 supports this feature, so it does not contained in mt6577
datasheet.
I will modify the comment.

> > + (b) "mtk,mt8127-i2c", for i2c compatible with mt8127 i2c.
> > + (c) "mtk,mt8135-i2c", for i2c compatible with mt8135 i2c.
> > + - reg: physical base address of the controller and dma base, length of memory mapped
> > + region.
> > + - interrupts: interrupt number to the cpu.
> > + - clock-div: the fixed value for frequency divider of clock source in i2c module.
> > + Each IC may be different.
> > + - clocks: clock name from clock manager
> > + - clock-names: clock name used in i2c driver probe
> > +
> > +Optional properties:
> > + - clock-frequency: Frequency in Hz of the bus when transfer, the default value is 100000.
> > + - mediatek,have-pmic: platform can control i2c form special pmic side.

I will change this to:
- mediatek,have-pmic: platform can control i2c form special pmic side,
only MT8135 supports this.

Is this OK?

> > + - mediatek,have-dcm: platform has DCM(hardware digital clock manager) property.
> > + - mediatek,use-push-pull: IO use push-pull mode.
> > +
> > +Example:
> > +
> > + i2c0: i2c@1100d000 {
> > + compatible = "mediatek,mt6577-i2c";
> > + reg = <0x1100d000 0x70>,
> > + <0x11000300 0x80>;
> > + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
> > + clock-frequency = <100000>;
> > + mediatek,have-pmic;
> > + clock-div = <16>;
> > + clocks = <&i2c0_ck>, <&ap_dma_ck>;
> > + clock-names = "main", "dma";
> > + };
> > +
> > --
> > 1.8.1.1.dirty
> >
>
>
>




\
 
 \ /
  Last update: 2014-10-31 03:01    [W:0.070 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site