lkml.org 
[lkml]   [2014]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] KVM: x86: detect SPIV changes under APICv
Date
APICv traps register writes, so we can't retrieve previous value.
(A bit of blame on Intel.)

This caused a migration bug: LAPIC is enabled, so our restore code
correctly lowers apic_sw_enabled, but doesn't increase it after APICv is
disabled, so we get below zero when freeing it; resulting in this trace:

WARNING: at kernel/jump_label.c:81 __static_key_slow_dec+0xa6/0xb0()
jump label: negative count!

[<ffffffff816bf898>] dump_stack+0x19/0x1b
[<ffffffff8107c6f1>] warn_slowpath_common+0x61/0x80
[<ffffffff8107c76c>] warn_slowpath_fmt+0x5c/0x80
[<ffffffff811931e6>] __static_key_slow_dec+0xa6/0xb0
[<ffffffff81193226>] static_key_slow_dec_deferred+0x16/0x20
[<ffffffffa0637698>] kvm_free_lapic+0x88/0xa0 [kvm]
[<ffffffffa061c63e>] kvm_arch_vcpu_uninit+0x2e/0xe0 [kvm]
[<ffffffffa05ff301>] kvm_vcpu_uninit+0x21/0x40 [kvm]
[<ffffffffa067cec7>] vmx_free_vcpu+0x47/0x70 [kvm_intel]
[<ffffffffa061bc50>] kvm_arch_vcpu_free+0x50/0x60 [kvm]
[<ffffffffa061ca22>] kvm_arch_destroy_vm+0x102/0x260 [kvm]
[<ffffffff810b68fd>] ? synchronize_srcu+0x1d/0x20
[<ffffffffa06030d1>] kvm_put_kvm+0xe1/0x1c0 [kvm]
[<ffffffffa06036f8>] kvm_vcpu_release+0x18/0x20 [kvm]
[<ffffffff81215c62>] __fput+0x102/0x310
[<ffffffff81215f4e>] ____fput+0xe/0x10
[<ffffffff810ab664>] task_work_run+0xb4/0xe0
[<ffffffff81083944>] do_exit+0x304/0xc60
[<ffffffff816c8dfc>] ? _raw_spin_unlock_irq+0x2c/0x50
[<ffffffff810fd22d>] ? trace_hardirqs_on_caller+0xfd/0x1c0
[<ffffffff8108432c>] do_group_exit+0x4c/0xc0
[<ffffffff810843b4>] SyS_exit_group+0x14/0x20
[<ffffffff816d33a9>] system_call_fastpath+0x16/0x1b

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
---
arch/x86/kvm/lapic.c | 10 ++++++----
arch/x86/kvm/lapic.h | 1 +
2 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index b8345dd..f538b14 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -201,11 +201,13 @@ out:

static inline void apic_set_spiv(struct kvm_lapic *apic, u32 val)
{
- u32 prev = kvm_apic_get_reg(apic, APIC_SPIV);
+ bool enabled = val & APIC_SPIV_APIC_ENABLED;

apic_set_reg(apic, APIC_SPIV, val);
- if ((prev ^ val) & APIC_SPIV_APIC_ENABLED) {
- if (val & APIC_SPIV_APIC_ENABLED) {
+
+ if (enabled != apic->sw_enabled) {
+ apic->sw_enabled = enabled;
+ if (enabled) {
static_key_slow_dec_deferred(&apic_sw_disabled);
recalculate_apic_map(apic->vcpu->kvm);
} else
@@ -1320,7 +1322,7 @@ void kvm_free_lapic(struct kvm_vcpu *vcpu)
if (!(vcpu->arch.apic_base & MSR_IA32_APICBASE_ENABLE))
static_key_slow_dec_deferred(&apic_hw_disabled);

- if (!(kvm_apic_get_reg(apic, APIC_SPIV) & APIC_SPIV_APIC_ENABLED))
+ if (!apic->sw_enabled)
static_key_slow_dec_deferred(&apic_sw_disabled);

if (apic->regs)
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index 6a11845..5fcc3d3 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -33,6 +33,7 @@ struct kvm_lapic {
* Note: Only one register, the TPR, is used by the microcode.
*/
void *regs;
+ bool sw_enabled;
gpa_t vapic_addr;
struct gfn_to_hva_cache vapic_cache;
unsigned long pending_events;
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-10-30 15:21    [W:0.072 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site