lkml.org 
[lkml]   [2014]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFT v3 06/14] regulator: max77802: Remove support for board files
From
Date
On czw, 2014-10-30 at 13:42 +0100, Javier Martinez Canillas wrote:
> Hello Krzysztof,
>
> On 10/30/2014 01:30 PM, Krzysztof Kozlowski wrote:
> tor_of_get_init_data() function?
> >> >
> >> > The regulator_of_get_init_data() searches from dev->of_node or its child
> >> > node.
> >> >
> >> > But dev->of_node is NULL.
> >> >
> >> > That's why of_compatible is needed.
> >>
> >> Yes but regulator_register() does dev = config->dev and config->dev is set
> >> to config.dev = iodev->dev in the driver probe function which is the
> >> pdev->dev.parent (the PMIC struct device) that has an associated of_node.
> >>
> >> So, regulator_of_get_init_data() will call of_get_child_by_name() passing
> >> the PMIC of_node and the sub-node name that contains the regulators. That
> >> is, whatever was set in desc->regulators_node and that should be enough.
> >
> > I missed that one in max77802 (in max77686: config.dev = &pdev->dev).
> > Now I wonder if it is proper to attach regulators to driver's parent
> > device. Consider regulator_register, around line 3640:
> > rdev->dev.parent = dev;
> > The parent of regulators will be equal to parent of regulator driver -
> > main MFD driver.
> >
>
> An early version of the max77802 regulator driver also set config.dev to
> &pdev->dev but then Mark asked me if I was sure that it should not be the
> MFD device instead.
>
> I then read in regulator_register() that the rdev->dev.parent was set
> to the device passed in config.dev as you said so I was convinced that it
> should be the parent device instead.
>
> Please take a look at [0] for that discussion.

To me a intuitive structure would be:
MFD device
|
- clock device
|
- clock1
- clock2
- regulator device
|
- LDO1
- LDO2
etc.

This also maps to structure in DTS. dev_err* messages and any
allocations should be done on behalf of regulator device, not parent.

Various drivers do this differently... The wm8* drivers set it mostly to
parent (MFD)...

I do not insists, especially because using parent's device would make
this driver simpler.

Mark, maybe you could shed light on it?


Best regards,
Krzysztof




\
 
 \ /
  Last update: 2014-10-30 14:21    [W:0.094 / U:0.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site