lkml.org 
[lkml]   [2014]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv2] phy: omap-usb2: Enable runtime PM of omap-usb2 phy properly


On Thursday 30 October 2014 04:39 AM, Rabin Vincent wrote:
> Unless I'm missing something, this patch appears to have still not been
> picked up. It would be nice if it can go in for 3.18 so that we have
> working USB on pandaboard again at least in that release.
>
> Tony, would you mind carrying it as OMAP maintainer since we haven't
> heard anything from Kishon (the PHY maintainer) about this? It's been
> acked by Roger (whose patch introduced the problem).

I'll send this in this -rc cycle.

Thanks
Kishon

>
> Thanks.
>
> (leaving the patch intact below)
>
> On Tue, Oct 07, 2014 at 12:02:51PM +0100, Oussama Ghorbel wrote:
>> The USB OTG port does not work since v3.16 on omap platform.
>> This is a regression introduced by the commit
>> eb82a3d846fa (phy: omap-usb2: Balance pm_runtime_enable() on probe failure
>> and remove).
>> This because the call to pm_runtime_enable() function is moved after the
>> call to devm_phy_create() function, which has side effect since later in
>> the subsequent calls of devm_phy_create() there is a check with
>> pm_runtime_enabled() to configure few things.
>>
>> Signed-off-by: Oussama Ghorbel <ghorbel@pivasoftware.com>
>> ---
>> drivers/phy/phy-omap-usb2.c | 6 ++++--
>> 1 file changed, 4 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
>> index 93d7835..acc13f8 100644
>> --- a/drivers/phy/phy-omap-usb2.c
>> +++ b/drivers/phy/phy-omap-usb2.c
>> @@ -262,14 +262,16 @@ static int omap_usb2_probe(struct platform_device *pdev)
>> otg->phy = &phy->phy;
>>
>> platform_set_drvdata(pdev, phy);
>> + pm_runtime_enable(phy->dev);
>>
>> generic_phy = devm_phy_create(phy->dev, NULL, &ops, NULL);
>> - if (IS_ERR(generic_phy))
>> + if (IS_ERR(generic_phy)) {
>> + pm_runtime_disable(phy->dev);
>> return PTR_ERR(generic_phy);
>> + }
>>
>> phy_set_drvdata(generic_phy, phy);
>>
>> - pm_runtime_enable(phy->dev);
>> phy_provider = devm_of_phy_provider_register(phy->dev,
>> of_phy_simple_xlate);
>> if (IS_ERR(phy_provider)) {
>> --
>> 1.8.3.2
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html


\
 
 \ /
  Last update: 2014-10-30 07:01    [W:0.091 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site