lkml.org 
[lkml]   [2014]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 03/20] usb: dwc3: initialize platform data at pci glue layer
Date
This patch initializes platform data at pci glue layer, and SoCs x86-based
platform vendor is able to define their flags in platform data at bus glue
layer. Then do some independent behaviors at dwc3 core level.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
drivers/usb/dwc3/dwc3-pci.c | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index a36cf66..ada975f 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -25,6 +25,8 @@
#include <linux/usb/otg.h>
#include <linux/usb/usb_phy_generic.h>

+#include "platform_data.h"
+
/* FIXME define these in <linux/pci_ids.h> */
#define PCI_VENDOR_ID_SYNOPSYS 0x16c3
#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd
@@ -102,6 +104,9 @@ static int dwc3_pci_probe(struct pci_dev *pci,
struct dwc3_pci *glue;
int ret;
struct device *dev = &pci->dev;
+ struct dwc3_platform_data dwc3_pdata;
+
+ memset(&dwc3_pdata, 0x00, sizeof(dwc3_pdata));

glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL);
if (!glue)
@@ -148,6 +153,10 @@ static int dwc3_pci_probe(struct pci_dev *pci,

pci_set_drvdata(pci, glue);

+ ret = platform_device_add_data(dwc3, &dwc3_pdata, sizeof(dwc3_pdata));
+ if (ret)
+ goto err3;
+
dma_set_coherent_mask(&dwc3->dev, dev->coherent_dma_mask);

dwc3->dev.dma_mask = dev->dma_mask;
--
1.9.1


\
 
 \ /
  Last update: 2014-10-30 11:21    [W:1.712 / U:0.912 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site