lkml.org 
[lkml]   [2014]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.14 073/238] USB: serial: fix potential stack buffer overflow
Date
3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit d979e9f9ecab04c1ecca741370e30a8a498893f5 upstream.

Make sure to verify the maximum number of endpoints per type to avoid
writing beyond the end of a stack-allocated array.

The current usb-serial implementation is limited to eight ports per
interface but failed to verify that the number of endpoints of a certain
type reported by a device did not exceed this limit.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/usb/serial/usb-serial.c | 32 ++++++++++++++++++++++----------
1 file changed, 22 insertions(+), 10 deletions(-)

--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -764,29 +764,39 @@ static int usb_serial_probe(struct usb_i
if (usb_endpoint_is_bulk_in(endpoint)) {
/* we found a bulk in endpoint */
dev_dbg(ddev, "found bulk in on endpoint %d\n", i);
- bulk_in_endpoint[num_bulk_in] = endpoint;
- ++num_bulk_in;
+ if (num_bulk_in < MAX_NUM_PORTS) {
+ bulk_in_endpoint[num_bulk_in] = endpoint;
+ ++num_bulk_in;
+ }
}

if (usb_endpoint_is_bulk_out(endpoint)) {
/* we found a bulk out endpoint */
dev_dbg(ddev, "found bulk out on endpoint %d\n", i);
- bulk_out_endpoint[num_bulk_out] = endpoint;
- ++num_bulk_out;
+ if (num_bulk_out < MAX_NUM_PORTS) {
+ bulk_out_endpoint[num_bulk_out] = endpoint;
+ ++num_bulk_out;
+ }
}

if (usb_endpoint_is_int_in(endpoint)) {
/* we found a interrupt in endpoint */
dev_dbg(ddev, "found interrupt in on endpoint %d\n", i);
- interrupt_in_endpoint[num_interrupt_in] = endpoint;
- ++num_interrupt_in;
+ if (num_interrupt_in < MAX_NUM_PORTS) {
+ interrupt_in_endpoint[num_interrupt_in] =
+ endpoint;
+ ++num_interrupt_in;
+ }
}

if (usb_endpoint_is_int_out(endpoint)) {
/* we found an interrupt out endpoint */
dev_dbg(ddev, "found interrupt out on endpoint %d\n", i);
- interrupt_out_endpoint[num_interrupt_out] = endpoint;
- ++num_interrupt_out;
+ if (num_interrupt_out < MAX_NUM_PORTS) {
+ interrupt_out_endpoint[num_interrupt_out] =
+ endpoint;
+ ++num_interrupt_out;
+ }
}
}

@@ -809,8 +819,10 @@ static int usb_serial_probe(struct usb_i
if (usb_endpoint_is_int_in(endpoint)) {
/* we found a interrupt in endpoint */
dev_dbg(ddev, "found interrupt in for Prolific device on separate interface\n");
- interrupt_in_endpoint[num_interrupt_in] = endpoint;
- ++num_interrupt_in;
+ if (num_interrupt_in < MAX_NUM_PORTS) {
+ interrupt_in_endpoint[num_interrupt_in] = endpoint;
+ ++num_interrupt_in;
+ }
}
}
}



\
 
 \ /
  Last update: 2014-10-04 00:41    [W:0.520 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site