lkml.org 
[lkml]   [2014]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/2] spi: fsl-spi: Fix parameter ram offset setup for CPM1
From
Date
On Fri, 2014-10-03 at 18:49 +0200, Christophe Leroy wrote:
> On CPM1, the SPI parameter RAM has a default location. In fsl_spi_cpm_get_pram()
> there was a confusion between the SPI_BASE register and the base of the SPI
> parameter RAM. Fortunatly, it was working properly with MPC866 and MPC885
> because they do set SPI_BASE, but on MPC860 and other old MPC8xx that doesn't
> set SPI_BASE, pram_ofs was not properly set. This patch fixes this confusion.
>
> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
>
> ---
> Changes from v1 to v2: none
>
> drivers/spi/spi-fsl-cpm.c | 9 ++++-----
> 1 file changed, 4 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/spi/spi-fsl-cpm.c b/drivers/spi/spi-fsl-cpm.c
> index 54b0637..0f3a912 100644
> --- a/drivers/spi/spi-fsl-cpm.c
> +++ b/drivers/spi/spi-fsl-cpm.c
> @@ -262,15 +262,14 @@ static unsigned long fsl_spi_cpm_get_pram(struct mpc8xxx_spi *mspi)
> pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64);
> out_be16(spi_base, pram_ofs);
> } else {
> - struct spi_pram __iomem *pram = spi_base;
> - u16 rpbase = in_be16(&pram->rpbase);
> + u16 rpbase = in_be16(spi_base);
>
> - /* Microcode relocation patch applied? */
> + /* Microcode relocation patch applied | rpbase set by default */
> if (rpbase) {
> pram_ofs = rpbase;
> } else {
> - pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64);
> - out_be16(spi_base, pram_ofs);
> + pram_ofs = offsetof(cpm8xx_t, cp_dparam[PROFF_SPI]) -
> + offsetof(cpm8xx_t, cp_dpmem[0]);
> }
> }

Why is PROFF_SPI not coming from the device tree? Why don't I see any
cpm spi in any device tree nor any binding for it?

-Scott




\
 
 \ /
  Last update: 2014-10-03 23:01    [W:0.075 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site