lkml.org 
[lkml]   [2014]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: e1000_netpoll(): disable_irq() triggers might_sleep() on linux-next
On Wed, Oct 29, 2014 at 07:33:00PM +0100, Thomas Gleixner wrote:
> Yuck. No. You are just papering over the problem.
>
> What happens if you add 'threadirqs' to the kernel command line? Or if
> the interrupt line is shared with a real threaded interrupt user?
>
> The proper solution is to have a poll_lock for e1000 which serializes
> the hardware interrupt against netpoll instead of using
> disable/enable_irq().
>
> In fact that's less expensive than the disable/enable_irq() dance and
> the chance of contention is pretty low. If done right it will be a
> NOOP for the CONFIG_NET_POLL_CONTROLLER=n case.
>

OK a little something like so then I suppose.. But I suspect most all
the network drivers will need this and maybe more, disable_irq() is a
popular little thing and we 'just' changed semantics on them.

---
drivers/net/ethernet/intel/e1000/e1000.h | 2 ++
drivers/net/ethernet/intel/e1000/e1000_main.c | 22 +++++++++++++++++-----
kernel/irq/manage.c | 2 +-
3 files changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000/e1000.h b/drivers/net/ethernet/intel/e1000/e1000.h
index 69707108d23c..3f48609f2318 100644
--- a/drivers/net/ethernet/intel/e1000/e1000.h
+++ b/drivers/net/ethernet/intel/e1000/e1000.h
@@ -323,6 +323,8 @@ struct e1000_adapter {
struct delayed_work watchdog_task;
struct delayed_work fifo_stall_task;
struct delayed_work phy_info_task;
+
+ spinlock_t irq_lock;
};

enum e1000_state_t {
diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c
index 5f6aded512f5..d12cbffe2149 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -1310,6 +1310,7 @@ static int e1000_sw_init(struct e1000_adapter *adapter)
e1000_irq_disable(adapter);

spin_lock_init(&adapter->stats_lock);
+ spin_lock_init(&adapter->irq_lock);

set_bit(__E1000_DOWN, &adapter->flags);

@@ -3748,10 +3749,8 @@ void e1000_update_stats(struct e1000_adapter *adapter)
* @irq: interrupt number
* @data: pointer to a network interface device structure
**/
-static irqreturn_t e1000_intr(int irq, void *data)
+static irqreturn_t __e1000_intr(int irq, struct e1000_adapter *adapter)
{
- struct net_device *netdev = data;
- struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
u32 icr = er32(ICR);

@@ -3793,6 +3792,19 @@ static irqreturn_t e1000_intr(int irq, void *data)
return IRQ_HANDLED;
}

+static irqreturn_t e1000_intr(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ irqreturn_t ret;
+
+ spin_lock(&adapter->irq_lock);
+ ret = __e1000_intr(irq, adapter);
+ spin_unlock(&adapter->irq_lock);
+
+ return ret;
+}
+
/**
* e1000_clean - NAPI Rx polling callback
* @adapter: board private structure
@@ -5217,9 +5229,9 @@ static void e1000_netpoll(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);

- disable_irq(adapter->pdev->irq);
+ spin_lock(&adapter->irq_lock)
e1000_intr(adapter->pdev->irq, netdev);
- enable_irq(adapter->pdev->irq);
+ spin_unlock(&adapter->irq_lock)
}
#endif

diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 0a9104b4608b..b5a4a06bf2fd 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -427,7 +427,7 @@ EXPORT_SYMBOL(disable_irq_nosync);
* to complete before returning. If you use this function while
* holding a resource the IRQ handler may need you will deadlock.
*
- * This function may be called - with care - from IRQ context.
+ * This function may _NOT_ be called from IRQ context.
*/
void disable_irq(unsigned int irq)
{

\
 
 \ /
  Last update: 2014-10-29 21:01    [W:0.090 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site