lkml.org 
[lkml]   [2014]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] serial: msm: Add magic SysRq support in dmmode
Date
Currently the _dm RX handler detects breaks but does not pass any
characters to uart_handle_sysrq_char().

The _dm optimizations combined with the port's spin lock make if
difficult to pass all characters to the sysrq logic because we cannot
safely call uart_handle_sysrq_char() when the lock is held without
deadlock (the console handler also takes the lock).

Rather than passing all characters via uart_handle_sysrq_char() this patch
only passes the last few characters in the FIFO. This should include all
characters typed as a slow (human) rate. This makes the problem much
simpler and allows us to move the handling of these characters outside
of the port lock. This makes magic SysRq work if there is a human at
the keyboard (or a short delay in a script).

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
---
drivers/tty/serial/msm_serial.c | 26 +++++++++++++++++++++++---
1 file changed, 23 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index 4b6c783..24c4fd1 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -104,6 +104,7 @@ static void handle_rx_dm(struct uart_port *port, unsigned int misr)
unsigned int sr;
int count = 0;
struct msm_port *msm_port = UART_TO_MSM(port);
+ unsigned char buf[4];

if ((msm_read(port, UART_SR) & UART_SR_OVERRUN)) {
port->icount.overrun++;
@@ -125,11 +126,10 @@ static void handle_rx_dm(struct uart_port *port, unsigned int misr)
port->icount.rx += count;

while (count > 0) {
- unsigned char buf[4];
-
sr = msm_read(port, UART_SR);
if ((sr & UART_SR_RX_READY) == 0) {
msm_port->old_snap_state -= count;
+ count = 0;
break;
}
ioread32_rep(port->membase + UARTDM_RF, buf, 1);
@@ -140,13 +140,33 @@ static void handle_rx_dm(struct uart_port *port, unsigned int misr)
} else if (sr & UART_SR_PAR_FRAME_ERR)
port->icount.frame++;

- /* TODO: handle sysrq */
+ /* The last few characters receive special processing below. */
+ if (count <= 2)
+ break;
+
tty_insert_flip_string(tport, buf, min(count, 4));
count -= 4;
}

spin_unlock(&port->lock);
+
+ /*
+ * We have deferred the last few characters to be processed
+ * with the port unlocked. This allows all characters received at
+ * "human speed" to be passed through the magic SysRq handling.
+ * The hardware sends us two characters after a break (the second
+ * of which is \0) so we are forced to process up to two final
+ * characters rather than just one.
+ */
+ if (count > 0) {
+ if (!uart_handle_sysrq_char(port, buf[0]))
+ tty_insert_flip_string(tport, buf, count);
+ else if (count > 1 && !uart_handle_sysrq_char(port, buf[1]))
+ tty_insert_flip_char(tport, buf[1], 0);
+ }
+
tty_flip_buffer_push(tport);
+
spin_lock(&port->lock);

if (misr & (UART_IMR_RXSTALE))
--
1.9.3


\
 
 \ /
  Last update: 2014-10-29 18:01    [W:0.044 / U:0.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site